have dell dimension 4700 xp need help with outlook express I have error message and can not send email

I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

Thank you, Gina Davis

I have

He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

How to add your Hotmail e-mail account to Microsoft Outlook Express
http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

Tags: Windows

Similar Questions

  • NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

    NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

    Hi BSRC$, in stock

    1. You have security software installed on the computer?
    2. You receive an error message when you restart the computer?

    Reinstalling Windows XP to the factory setting would not be the first option.

    It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

    I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

    How to remove Windows XP Service Pack 3 from your computer

    http://support.Microsoft.com/kb/950249

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

  • need help with download of cc. gives error 1001 whenever I install.

    need help with download of cc. gives error 1001 whenever I install.

    Hello

    Please see the thread: https://forums.adobe.com/thread/2106211 and CC update crash! Error code: 1001

    Also, please see the article: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

    Please write if it helps.

    Kind regards

    Shelly

  • Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

    Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

    Hello

    ·          What is the number and the model of the computer?

    ·          What is the service pack installed?

    ·          The meadow of operating system has been installed on the computer?

    ·          Do you remember any changes made on the computer before the show?

    Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

    You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

  • I have a MS streets and trips 2010 and can not send cards to other owners of MS Streets and Trips

    I have a MS streets and trips 2010 and can not send cards to other owners of MS Streets and Trips

    ,

    Check with the streets and the support of the TRIPS Agreement and its forums.

    Streets & Trips
    http://www.Microsoft.com/streets/en-us/default.aspx

    Streets & Trips - help and Support
    http://www.Microsoft.com/streets/en-us/support-and-training.aspx

    Streets and travel community
    http://www.Microsoft.com/streets/en-us/community-and-news.aspx

    Streets and travel Forum
    http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

    Support for MapPoint, streets & trips and Highway
    http://support.Microsoft.com/ph/851

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I deleted the SMART virus, but I can't access my desktop. I have no icons and can not put everything on it.

    I deleted the SMART virus, but I can't access my desktop. I have no icons and can not put everything on it.

    Hello
    To view your files and your icons, download Unhide. Once downloaded, double-click display and let it run. It removes the attribute hidden on all files and try to restore the items on the start menu to their proper location.
    I hope this helps you.
    Brian
  • BlackBerry smartphones can not send email with v4.5

    I've upgraded to version 4.5 of the software of the device for my Curve 8310 and now I can not send emails (receives OK). I can't access the email settings. When I go to the Setup Wizard, it happens to the page date and time and the next page returns a "404: not found" error. If I go to my 'Mobile e-mail settings' it does not recognize my user name and password (grrrrrr). Suggestions that don't involve reinstalling the original software?

    Network: Vodafone UK

    Hi mjbryan

    U put in place an email with the BlackBerry Internet Service account?  If you have, you must log into your BIS account and return service directories.  If you have not configured to send yet, you must create an BIS account and add your email address.  You should be able to set up BIS here http://www.mobileemail.vodafone.net/

    See you soon!

  • I just bought Adobe Elements14 photoshop &amp; Adobe premiere Elements14 I have an iMac and can not find the download for my platform.  There only Windows.  What should I do to get a Mac download?

    I just bought Adobe Elements14 photoshop & Adobe first Elements14 I have an iMac and can not find the download for my platform.  There only Windows.  What should I do to get a Mac download?

    Mariene salvation,

    Please find the links below to download:

    Photoshop:Download Photoshop Elements free trial | Adobe Photoshop Elements

    Creation:download first Elements | 14, 13, 12, 11, 10

    Hope this helps!

  • Dell Dimension 4700 upgrade tips Help!

    Hello Dell Community, I currently have a Dell Dimension 4700 and hoped to upgrade my computer to a computer game, with a budget of around $100-200.

    I wonder as to the game going, that upgrades would produce the biggest change and progress in the game? I'm hoping to improve up to 2 GB of Ram and add a video card, but don't know if it is the best choice to go.

    I have studied this subject and found several posts in the forums, but they were all overwhelmed and I hope to get some knowledge as well as recent graphics cards or Ram that can improve my FPS in game and all around my budget. Thank you.

    Record of Dell:

    Name of the operating system: Microsoft Windows XP Home Edition
    Version: 5.1.2600 Service Pack 3 Build 2600
    System model: Dimension 4700
    System type: X 86-based PC
    Processor: x 86 family 15 model 3 Stepping 4 GenuineIntel ~ 2793 Mhz
    The version of the BIOS/Date: A10 of Dell Inc., 04/01/2006
    SMBIOS Version: 2.3
    Total physical memory: 512,00 MB
    Available physical memory: 191,89 MB
    Total virtual memory: 2.00 GB
    Available virtual memory: 1.96 GB

    Majera

    Sorry, but there are very few, you can upgrade on a child of seven years 'obsolete' 4700, to make a system of 'game '.

    Better to put the money upgrade, to buying new desktop PC.

    Bev.

  • Need help with packaging CS4; activation of 10.10 and 10.11 customers

    We have a package made by activating the former employee worked in 10.9 OSX clients. Now, we need to rebuild and get the activation job. Our license is provided.

    Is likely not to be able to do this because of the 'special' required to install OLD programs on the NEW Mac (see below)

    But to help you, you need these 2 links... Packer links https://forums.adobe.com/thread/1586021

    http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

    Maybe it's a fake because of Mac El Capitan and OLD programs error

    This information is a MUST to install old programs on Mac El Capitan

    -You can't get the same error message, but here are some links that CAN help with old programs

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • Need help with the data storage store, local array and network connections

    Need help with my ESXi 4.1 installation

    My hardware:

    I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

    The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

    I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

    My Situation:

    I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

    Help with the data store and network:

    I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

    I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

    Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

    I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

    Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

    You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

    Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

    RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

    You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

    Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

    UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

  • need help with my screen has been using mouse and the screen is smaller and smaller

    need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

    Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

  • I never had trouble with my server out log out before. I'm travelling and my first day I can receive but not send mail. I went through all of the suggestions of support, nothing helps. I can not send emails. I El Capitan on my Mac

    I have a macbook of El Capitan and my first day on vacation to halfway around the world, I can receive but not send emails. I had a conversation with my provider and all the settings, usernames and passwords are correct. I tried everything I read so far related to this topic from Apple and I can not send. Any other suggestions?

    What happened to me several times over the years, as different local networks may not connect in order to SEND email but without reception problems.

    My solution is to always use the WEBMAIL service belonging to the service of your email provider... be it Apple or Blueyonder, or anyone.

    Occasionally, a national internet service - for example; the Sultanate of Oman, in my experience - can refuse to deal with mail because the discussion on a particular topic is not permitted in the jurisdiction of that country, but it is very rarely the problem. Try just using the webmail online pages - for example; webmail service to iCloud in the case of an Apple (.mac, .me, .icloud) email address - and who usually works for me, anyway.

  • Need Driver Software for Motorola w376g. Error: "software driver can not be found.

    Original title: software Motorola w376g driver

    Hello

    Where can I get software driver for a Motorola w376g Tracfone cell phone?

    What I'm trying to do is to load a ringtone from my phone to my laptop and I get a message error "software driver can not be found.

    Is this possible?

    Thank you

    Deb

    Hello

    Have you been able to use the cell phone with no problems before?

    Step 1: You can try to download the drivers from the link below and install it.
    http://www.Motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

    Note: Please restart the computer after you install the driver.

    Step 2: You can also try to check the same cell phone manual to use the mass storage option. You can use this option for mass storage to access the data stored in the cell phone.

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • BlackBerry Z10 can not send email with pop accounts...

    Z10... #STL100-4 OS: 10.2.01791 Verizon

    I can receive emails for my pop [email protected] and @columbus.rr.com, BUT I can't send emails... someone can help me with the info from the server... and any information that could solve this problem... or help. I have

    tried everything... Please help!

    THX

    Bowdett

    I had my RR give me new settings when my emails stopped going out. They changed their steps.
    To the lower entrance
    Mobile - smtp.roadrunner.com
    Port 25
    Try and save at the top right.

Maybe you are looking for

  • MacOS Sierra runs smoothly in my mac?

    Hey everybody, I use a MacBook Pro (15-inch, mid-2012) with the following configuration: Processor: 2.3 GHz Intel Core i7 RAM: 4 GB 1600 MHz DDR3 Intel HD Graphics 4000 1536 MB The latest version of the OS will work in a smooth way, or it may cause s

  • Installed at El Capitan and now HP printer does not work via the network

    Installed at El Capitan and now HP printer does not work via wireless network

  • Firefox has become virtually impossible to use

    Firefox: 1A summer crashing all the time for about two months now and lose my tabs2 is now give endless "Script no longer" message every time I try to load media (only static pages of charges)3. will not again play teleseminar replays4. won't uninsta

  • Boot Tecra problem

    Every time when my Tecra S1 has been disconnected from its power source for lomger 8 hours, I get "control system. Then press the [F1] key"message. Where did this come from?

  • The Multi Media Card reader does not work on M30X-128!

    I have some problems with the MMC card reader on my M30X 128: i.e. SONY Memory Stick is regularly recognized as plugged into the slot, I can see it in the taskbar windows at the bottom of the screen and I can also remove it safely, but it does not ap