Have dimension 2400 - What dvd burner do I need (IDE or SATA)?

Similar Questions

• What dvd burner is compatible with Tecra A2

  Hello

  I want to know what dvd burners are compatible with my tecra A2 because I bought a dvd burner and does not work with the tecra A2 (IDE1 #error).
  There is nothing about it in the manual.

  Can you help me?
  Thank you.

  This #error IDE1 appears because of the evil master\slave\c-salt settings.
  All Toshiba slim line discs works in cable (CSEL) default selection mode. In other words, the player receives a signal from the laptop it say if it needs to act as a master or a slave device on the IDE channel.

  Some portable computers on the market do not work according to this specification, but use the way inverted CSEL signal to save a bit of power electric. If you are installing a drive running in standard CSEL mode in such a laptop, the inverted signal will require to work evil master/slave mode giving the reader the logical address as the hard drive installed on the same IDE channel. Accordingly, the optical drive, HARD drive or both cannot be detected by the BIOS and is not usable. Some laptops may display an error message at the start, for example 'IDE #1 error"or similar.

  In some user manuals, you can find information about compatible CD/DVD players.
  Did you check that?

  If you find any details on a compatible player then contact ASP in your country for info. You can also order such driver of these guys here.

  Good luck

• For a Dimension 8400 CD/DVD burner

  I just bought a CD/DVD for my Dimension 8400 burner and I have problems installing. First of all, the Green tabs that screw on the thing don't match so I don't have 1 screw on each side and I'm not sure where to connect the orange cable provided. Also I don't know what to plug into the bag of the drive other than the orange cable. Confused. Very confused. Help!

  
  

• Equium L20-198: what DVD burner are compatible

  Hello.

  The combi CD / DVD writer on my laptop decided to give up the ghost.
  In my view, there is a good choice of burners 'slimline' designed for portable computers out there, but I was warned that not all burners are compatible with all PC.

  Apart from one obvious Mat * like one already installed, someone could you please recommend or advise the slimline burners will be compatible with Toshiba laptops, or better yet my model in general or at least advise what brands are known to be incompatible with computers laptop toshiba.

  I would be extremely grateful for any help you could give. :)

  Thank you very much
  Steve.

  You are right. Not all CD/DVD drive are compatible due to different master/slave/c-salt settings.

  But I ve discovered DVD Super Multi Pinan could be compatible:

  -MATSU * A (UJ-841BTQ-A)
  -HLDS (GSA-4082N. ATAKN0)
  -Pioneer (DVR-K16TBA)
  -TEAC (DV-W28EA)

  You can also order the compatible CD/DVD player with ASP in your country.
  Guys might provide details which readers are correct.

  Good bye

• Satellite Pro M30: What DVD burner is compatible?

  Hi people, ask yourself if you can help.

  I have a sat Pro M30 but it came with a CD-RW/DVD-ROM drive. I decided that I would be able to write DVDs with it also. Can someone point me in the direction of a substitute for the current drive - I really don't want an external, but a replacement for one that is already there. Product ID and where to buy would be really nice.

  Thank you
  Richard.

  Hi Richard

  As far as I know MS M30 is similar to Satellite M30. As far as I know that the Satellite M30 has a Super-Multi drive Matsu * a UJ-820. I guess you can use the same player with your device.

  Good bye

• OK... whenever I go to the creation of windows dvd, I select all the files and all the items, I would like to add... the style of the menu favorite... but then I click on burn, then it is said that I have to choose a dvd burner or make sure that one is in

  Windows vista DVD maker, home premium one... I used it before and it even worked... but now it doesn't, and the sign above keeps poping up

  Hello

  I just fix and I want to help other people to:

  I'm using Win7 x 64 RC

  the same clean "BURNER NOT FOUND"!

  1 - Go to the Device Manager "do right click in the icon my computer."
  2 - Select DVD /CD-ROM
  3. disable all virtual rom you like "farston Virtual cd or dvd driver image.
  4. it will be said, you need to restart your PC after a reboot, your DVD maker it will burn corect!
  and now im burning my DVD!
  After that finsh, you can re-enable the virtual DVD/Cd...

  I know its annoying whenever you want to create a dvd, you need to do this step! and if I find another solution, I'll post it here...

• DVD BURNING PROBLEM! NEED HELP!

  I'm burning my newly downloaded Windows 8 on a DVD. The problem is, I don't know what kind of DVD to burn. DVD-R, DVD + R or DVD - RW! Help, please! If you know ANY information on this subject, it would be VERY useful.

  You can use any blank DVD to burn Windows 8 on. You will be able to install it using three types.

  DVD-R or DVD + R would be the two best options.

• I don't have that PP upgrade DVD Cs6 Cs3, I need to reinstall in a new machine, how can I do this without disc cs6

  I have used PP since 1.5 I am now on CS6, but 3 recent updates have been on DVDs of upgrade. Now I need to remove and reinstall the Prime Minister. How can I do this without disc CS6. I can't reinstall CS3 and do the updates individually as CS3 was for Win XP and I'm not sure it would work. Is there a dept in Adobe I can contact (no phone number) to get a DVD CS6. Thank you for any assistance.

  Adobe has made this process much simpler in recent years.

  No need to re - install any version prior to the current version (CS6). All installers (upgrade or full) contain the complete program code. The difference between the full and upgrade is in the serial number.

  All you need to do is download (link below) and install CS6, indicate the number of the CS6 upgrade then enter CS5 serial number (although this is also an upgrade).

  Download the CS6 products

• iDVD on the part of an external DVD burner

  The optical drive on my mac mini 2009 died. I need to burn a project to a DVD. I have attached an external DVD burner for mac. I play DVD. How to record from iDVD please?

  I had a similar set on one of my Mac mini.  My internal optical drive still works fine, but I bought an external burner because the Apple optical drive cannot burn the M-DISC.  (M DISC is what we use now.)

  http://eShop.MacSales.com/item/OWC/MR3UBDRW16/

  Don't burn your DVDs from iDVD. Instead, use iDVD to create an image file and then burn the image file using the disc utilities. Utility disk will be out and find all your drives connected and it should see externally, (he does with us).

• Why the cd dvd burner motor does not start but will start to manual

  I have a E-Machines, does not start Windows Vista Home Premium 32-Bit, Windows media player or no matter what dvd burner

  Hello

  1. it worked earlier? If so, remember you have changed your computer?

  2. what happens when you insert a CD or a DVD?

  Run the fixit from this link to activate autorun and check to see if this helps: How to disable the functionality of Windows Autorun http://support.microsoft.com/kb/967715

  Note: click the fixit to activate autorun.

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• CD DVD burner shows disk full when empty

  When I put a disk empty in the CD/DVD burner and you try to burn a CD, it shows full.

  DVD works as should be.

  Hello

  1. what DVD burner you are using?
  2. this happens with a particular disc?
  3. do you try to use the same drive on another computer?

  Please answer these questions that might help us helping you better.

  You can also view the Sub articles that may help you resolve this problem.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Demo: Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-burn-a-CD-or-DVD

  DVD-video burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

• CS3 and dvd burner program

  Hello

  I just uninstall Roxio DVD burner software because of its Media Manager and other features with the CS3 interference.

  Anyone know of a free DVD burner - I just need the DATA DISK function to save the files on a DVD... that I can use with CS3 and it is not hang all sorts of stuff crazy re: media?  Or... a program relatively little expensive would be OK, but I'm struggling a little $$ wise, so less is more.

  Stem

  Prejudice,

  I too have Nero beautifully alongside a bunch of Adobe programs. However, I am only a custom installation, omitting InCD and all observers and the "sniffers". Nero is not 'bad', but at least with the default value of old plant would load a whole bunch of modules that get in the way as well as sap valuable resources. As an aside, Nero seems easier to "clean," that Roxio, which seems to run tentacles everywhere. Once it is fully installed, it takes a presser foot or a reformat - or so it seems.

  If I have some Nero, I usually just go with ImgBurn, be it for a DVD-video or DVD-data.

  Hunt

• Dimension 2400 - need new hard drive

  The original HD on my Dimension 2400 is a failure so I need to replace.  This option Dell will work?

  500 GB SATA Seagate Barracuda 7200.11 - manufacturer: ST3500320AS | Reference Dell: A1357441

  I am running Win XP SP3.

  I guess I should buy a cable as well.  Do I need to reset the NVRAM and replace the battery?  Thanks in advance.

  
  

• My external CD/DVD burner does not work with Dell Dimension 2400 XP

  I have a Dell Dimension 2400 desktop but the CD-ROM supplied with the PC is no longer works it is stock and does not open, this is the reason why I had to buy an external which has the Maxtor 6E040L0 pilot, he worked for a while but don't any more. It is listed in the Device Manager and indicates that the device is working correctly, it is also listed in my computer, in the tag properties indicates it works. What can I do? I am not informed PC and don't have the money to hire a technician. Please, I beg you! Help. Thank you.

  Jose

  Hi JoseCedeno,

  See the following troubleshooting article:

  http://support.Microsoft.com/kb/982116

  I hope this helps!