CS3 and dvd burner program

Similar Questions

• It apears that ROXIO CD and DVD copy program is part of the Vista program when I got it. After my computer crashed it seems to have disappeared. It worked like a charm, how do I get it back?

  It seems that ROXIO CD and DVD copy program is part of the Vista program that came with the computer. After that the computer crashed it disappeared. It can be recovered?

  Roxio CD and DVD is NOT a part of Vista, but it may have come with other software on your PC from the manufacturer.  When you crashed, how are you on the recovery?  Did you do a clean reinstall?  Did you use a recovery disk provided by the manufacturer or a recovery Partition created by the manufacturer, or have you used a Vista disk?

  If you used disks of recovery or a recovery of the manufacturer Partition, then you need to discuss with them because they produce these discs - not Microsoft (and they may be able to solve the problem or refer you to a site where you can download the program or email the file to you or something - or send you the replacement of the recovery with the software on this disc so always available - possibly for one) small fee).  If you used a Microsoft disc, then this program is not on the disc and why he is not installed more.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP pavilion dv6 - product a1m22av dvd burner program

  Hi I just got this Hp pavilion dv6 - a1m22av produced by a friend of mine as a giift and I was wondering which program works best for the dvd burner, it seems that it came with the recovery disk. Any suggestions?

  Hello

  Please try to create a set for yourself (I hope that your friend has not removed this tool):

  http://support.HP.com/us-en/document/c01867124

  Many around, pay for burning software, free of charge. Please read the following article and select a product that is suited to your needs.

  http://www.techsupportalert.com/best-free-CD-DVD-burning-software.htm

  Kind regards.

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• Recently replaced hard drive. CD and DVD burned on vista cannot read images, but play videos on an another computer (XP). They are readable on computer vista created the. Closed manually as well.

  EMachines replaced my hard drive. I normally share files between computers with CDs and DVDs. returning from a trip, I downloaded photos and videos of my Sony camera to computer vista with Solution Explorer, as usual. I burned the pictures and videos on CD and I tried to transfer them to my Toshiba laptop, XP. The trasfered from videos, but the image file was empty. I have repeated twice, thus closing manually. Thew CD shows as complete on the vista machine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Read the info on above link and the links in "see also".

  This may be your problem:

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  See you soon. Mick Murphy - Microsoft partner

• DVD-rom and dvd burner is no longer appear in "My Computer".

  Just recently, I improve my XPS 700/720 hybrid for Windows Vista Ultimate 64-bit. Everything has been great to work for the last 2 weeks, but my dvd burner - rom and dvd both leave suddenly appear in 'my computer', after that I tried recently to reinstall Roxio Creator MyDVD Combo THE. I checked the Device Manager and the two drives appear with a (!) icon next to them. Open the Properties tab gives me the following message:

  "A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  The message is the same for both drives, and I can't understand a solution to this at all. I tried to uninstall devices, but when the computer detects, it reinstalls the drivers right and translates the same message. I don't know where to find new drivers for these drives (dvd - rom Philips DRO6316, dvd burner is TSSTCorp DVD +-RW TS - H553A.

  Any help would be greatly appreciated. Thank you.

  
  

• Satellite M45-S355 and DVD burning

  I have a Satellite M45-S355 laptop and never tried to burn DVDs so far. I know it's a rug * a pilot/burner UJ - 831 s.
  I am not able to find any DVD x 16 for their speed. How can I burn on these types of DVDs?

  When I try to format a disk, etc., the computer says that the CD/DVD-R are not supported by this version of DLA.

  Any help would be great!

  Hello

  If you want to burn data to DVD then I would recommend using a 3rd party software like Nero burning ROM
  I use Nero and I got m.

  Also I recommend you to check the registry and to remove the Upperfilters and Lowerfilters values completely from the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally and most importantly you can use DVDs that can be engraved with a higher speed, but I recommend the DVD with the lower speed burning I do with 1 x speed.

  See you soon

• DVD ROM and DVD burner is no longer available

  I lost connection with my DVD ROM and burner.   They no longer appear with other devices under 'my computer' and when I look in Device Manager there is a yellow exclamation points next to these two devices.  What should I do to restore the connection or correct the error?   Any ideas why this happened in the first place? I am running windows XP service pack 2.  Thanks in advance.

  Hello

  Please try the instructions in the link below on this subject:

  http://support.Microsoft.com/kb/982116

• Satellite A200 - lack of icon DVD and DVD burner does not.

  Hello

  I have a problem with my laptop Satellite A200 series. DVD/RW icon disappeared from my folder on the computer. I looked into the system folder and it says:-

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I've been on the Microsoft Web site and who said to delete the driver and them click on check for changes on the hardware and it should find the new driver, but it still does not work...

  Any ideas?

  Hello

  Maybe this will help.

  [ME KLICK | http://aps2.toshiba-tro.de/kb0/TSB7801XL0000R01.htm]

• CD and DVD burner does not

  I have a workstation HP xw6200 using windows XP.  Today when I tried to burn photos to a CD using Roxio, I received the message: "there are no recorders support.  Make sure that your burner is on and all cables are connected properly.  Also make sure you have the latest version of the installed software and the latest drivers. »

  I don't know if this is related, but before that, I inserted a blank CD in the computer, forgetting that there is already a small CD inside.  When I did the computer makes a funny noise.  Finally, I got out the CD and discovered the other below CD.

  Thanks for any help.

  Thank you very much!

• my DVD burner program disappeared.

  Found a download here who has restored, but it disappeared again, and I can't find the last priest. It was a dowlnload to restore a driver and another to remove it. I ran it rather than save it.

  Hello

  Thanks for posting this question in the Microsoft Community.

  1 are. what program downloaded you referring?

  2. what changes did you make in the computer for this program to disappear?

  3. what exactly are you trying to achieve?

  Please provide us with more information to continue troubleshooting as a result.

  Thank you.

• PROBLEM WITH READING AND DVD BURNING PERIFERIQUES

  I did a cleanup of the fairground of dvd playback, but after cleaning they are not reading anything. I did an update the drivers but it doesn't quite work. What should I do?

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Problem with Media Center recorded TV shows DVD burning.

  I recorded a few TV using Media Center shows and when I try to burn on a DVD they start and then slow down and stop. I tried on two different computers Vista with Home Premium and the other with Ultra same on both. They identify to the about 23 to 32% complete before stopping and don't ever burn anything on disks. It is said that the engraving is underway.

  Hi Kb11,

  Have a. you tried to burn on a different DVD?

  B. do you use a third-party burning software on your computer for CD and DVD burning?

  C. Have burn you TV shows successfully earlier?

  D. do you have an error when burning?

  Burning a TV show on a DVD can take some time to complete, depending on three factors: the length of the speed of your burner DVD, added video files and resources of your computer system. Wait for a while and see if it ends.

  1. Click the Start button, click all programs, and then click Windows Media Center.
  2. If Media Center is not full screen mode, click the maximize button.
  3. Insert a blank recordable DVD into your DVD burner.
  4. Click on the notification, burn a CD or DVD which appears.

  If you do not see the notification, on the Windows Media Center start screen, navigate to tasks, and then click Burn CD/DVD.

  1. In the Select the disc Format page, click Vidéo DVD, and then click Next.
  2. Type a name for your DVD, and then click Next.
  3. On the Select media page, click recorded TV or video library, and then click Next.
  4. Select the items you want to burn (check marks appear on or next to the items that you select) and then click Next.
  5. To add more TV shows or video files on the disc, on the Review & Edit page, click add more.
  6. Repeat steps 5 through 7 until you have added all the shows recorded TV and videos you want to burn.
  7. On the page of review & edit , click Burn DVDs.
  8. In the opening of copy notification, click Yes.
  9. Once the disc is burned, in the notification filling burn , click done.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

  Please let us know the result.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Half frame of slide shows - DVD burning slide

  I created a slide show in Photoshop Elements 10.  I then clicked on exit to begin the process of creating a DVD.  When the show transferred to first Elements 10, only the lower part half each frame dia appeared and thus produced a slide show DVD with only the bottom half of the frame.  I then tried to burn a new DVD of slide show that I had burned successfully on a previous occasion.  By clicking again on the production and following the menu, I had the half frame again when I arrived for the DVD burning program in first Elements 10.  Can someone give a help?

  Here's that ANNOUNCEMENT:

  ANNOUNCEMENT: Windows Update is display be blackened

  MicroSoft has released an update for Windows, which poses problems with screens. What follows is of Talbot McInnis, who has been tracking this problem and offers a solution:

  "MS technology MS13-057.  Specifically, on kb2834904 XP and windows 7 kb2803821 is causing a problem

  .

  For us, it happens when the decoding of WMV9 files.  Not all uses of decoding WMV are affected, but I have confirmed that when linking the WMV decode DLL to a sample for RGB32 video grabber, executives are black on top, so that points directly to the internal data of the dll to decode WMV decoding.

  You can uninstall these windows updates to fix your problem. »

  There are several discussions on the issue that this update is initially on the pre and PrPro Forums, so we can get more details. So far, there is not another hotfix of MS or Adobe.

  Also, check out this Adobe Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml

  Adobe reported that MS is approaching a new update, but not yet the release time.

  Good luck

  Hunt

• Satellite A60 can't read CDs and DVDs serious

  Hello
  I have a problem with my carpet * a UJ 820: it reads not burnt, CD or DVD, one real cd/dvd. I cleaned the lens with no improvement.

  Help me please!

  You are able to use the STRANGE for CD and DVD burning? Have you tested with different data, burned onto CD/DVD or you have this problem with specific data such as movies or music?