Have HP Pavilion then stop then on entry works
Hi just bought a HP Pavilion P6 2467efm and the Pavilion 23xi screen. Odd fault that you turn it on and nothing goes well and then if you turn it off and the new everything seems to work. Suggestions people?... JR
Robin,
Well the good news.
Thank you to provide to the community your solution in case someone also has a similar question.
Nice day
Tags: HP Desktops
Similar Questions
-
I have hp Pavilion 1241ea g6, no noise, but work with external or a helmet
I use mostly external speakers with me laptop, yesterday I unplug my external speaker, but there is no sound from the internal (on-board) pregnant and my warranty until 12/2012. Please give me a suggestion, or any other solution than what happened with m y laptop (works with headphones)
HP-Pavilion 1241ea G6
Windows 7 64 bit
Sound problem
Hello
Try the following.
First, unplug all external hardware attached to the computer, including your external speakers.
Then download IDT Audio Setup on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you're done, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you have now the audio through your internal speakers.
Kind regards
DP - K
-
Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?
Have you tried to restart the iPhone by pressing and maintaining the sleep/wake and home buttons?
-
USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?
Hi ahmedman_10,
· You follow the steps in the article of my previous answer?
Follow these steps in my previous answer and at the same time this article, follow these methods.
Method 1: Follow the steps in the article.
USB port may stop working after you remove or insert a USB device
Method 2: Update the latest drivers for chipset.
How to manage devices in Windows XP
For reference:
Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
-
For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.
Thanks, Elsie
Hello
What the popup say or lead?
Search for malware, and then run the cleaning as described below.
--------------------------------------------------------------------------
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.
Hi neilm,.
When you have disabled the cache, did you do via preferences > Cache Purge? Rarely, this method seems to work for everyone. It hasn't for me, because he never removes all hidden. But now press Cmd-Opt-Shift/Ctrl-Alt-Shift while launching Bridge and purge the cache and preferences will generally produce as clean a sweep as possible without going through the uninstall/reinstall bit. You need to configure your preferences for bridge all over again, but that shouldn't take too long.
If this does not stop smash, return and let us know your OS is and what version of bridge that you use. CS6, but the numbers that you see when you click on the bridge.
-
I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for the use of Win 7, I had previously, and have records. Then go to Win 10. Where should I start?
You can start here
-
If I have a mask in Photoshop feather, save my work and then view in Lightroom, the mask is not good! Help, please?
This is a known bug - see workaround in this bug report in the Adobe official feedback forum: Photoshop: blur Non-destructive for the masking does not record properly more | Community customer Photoshop family. In addition, please add your vote and opinion for the bug report. even though Adobe has acknowledged the problem, they can't fix it immediately. Each vote makes it somewhat more likely that they will prioritise a fix.
-
Find the table number B >; = number in the table but <; then next entry b
I'm trying to understand the following: find the table number B > = number in the table but < then next entry b
Table A
5
10
21
20
Table B
8
12
16
23
40
The 5 entry in table A, I would like to return 8 b
For the 10 entry I would lke to return 12 b
21 entry I would like to return 23 b
20 entry I would like to return 23 b
Edited by: Withnoe October 5, 2012 09:19
Edited by: Withnoe October 5, 2012 10:54CREATE TABLE TAB_A (CLASS # VARCHAR2 (10), THE NUMBER OF TERM);
CREATE TABLE TAB_B (CLASS # VARCHAR2 (10), THE NUMBER OF TERM);INSERT INTO TAB_A VALUES ('BIOL 520', 201010);
INSERT INTO TAB_A VALUES ('BIOL 521', 201250);
INSERT INTO TAB_A VALUES ('BIOL 522', 200980);INSERT INTO TAB_B VALUES ('BIOL 520', 201110);
INSERT INTO TAB_B VALUES ('BIOL 520', 201150);
INSERT INTO TAB_B VALUES ('BIOL 520', 201250);
INSERT INTO TAB_B VALUES ('BIOL 521', 201250);
INSERT INTO TAB_B VALUES ('BIOL 521', 201260);SELECT MIN (TAB_B.TERM) TERM, TAB_B.CLASS # TO TAB_A, TAB_B
WHERE TAB_A.CLASS # = TAB_B.CLASS #.
AND TAB_B.TERM > TAB_A.TERM
GROUP TAB_B.CLASS #;Please let us know if you need anything else. Thank you
-
HP Pavilion DV7 stops unexpectedly
Hi all
A few days ago, I was looking through random Internet when my HP Pavilion DV7 stops suddenly. I turned on and it loaded on the Windows screen and then off again. I removed the battery, a memory (I have 2 DIMM 4 GB) and put back the battery and the other DIMMS in but the problem remains. It's a very strange problem - when I press F2 to enter the memory test, it starts to scroll a memory check and then turns off again. When I try to start it in recovery mode or in safe mode also stops. I don't know if it's a hardware or operating system problem - of ideas?
OK, thanks for your help
-
I have a pavilion with Vista m9457c. Recently, it developed a problem in which the mouse or the keyboard you wake the computer from sleep mode more. I knew that the fan on the video card was bad, so I replaced the video card. This does not solve the problem. I did so that the keyboard and mouse could get the computer from sleep mode, but it is still not correct the problem. If I let the computer to sleep, nothing happens when I move the mouse or press the Crescent Moon on the keyboard. The screen remains dark. Then I have to physically press the power button / stop and return to restart the computer. Help me, Obi - wan!
Hello
You can read the folloaing articles and see if it helps.
The problems of wake the computer from sleep mode
Hope this information is useful.
-
I have HP Pavilion the sound bar is not appeare
I have HP Pavilion dv7-2220sf
the Soundbar is not appeare when I + or VOLUME -.
I need too SMARTMENU HP
Thank youHello
Make sure that you have installed another MediaSmart software first and then install HP MediaSmart SmartMenu last of all. You can find all of the MediaSmart software available for your machine under the 'Software - multimédia' heading at the following link.
Kind regards
DP - K
-
I have a pavilion dv7 7000. I want to change my card to default chart to 630 m not intel nvidia graphics HD 4000.
Hello
Go in the NVIDIA Control Panel, and then select manage 3D settings. Now, click the global settings tab, and then select it Auto drop down. Now select processor High Performance NVIDIA.
The drawback with the above is that you will consume more energy and your system can run on battery as long. An Alternative is to select the program tab and then just add the program you want to run on the processor performance, NVIDIA.
-
Installation of the third hard drive? I have a Pavilion 1090 t.
I have a Pavilion 1090 t and I want to install a third hard drive. I find only two on the motherboard sata ports that are side by side. How can I connect the third sata drive?
Hello
You can use the back ESATA ports for a hard drive that is in a powered drive ESATA external enclosure. I did this work. However, you won't be able to RAID ESATA port devices. I use my external ESATA drives for backups. I usually use a box 2.5 "because it is very portable. If you don't mind working with a naked drive, then you can also use a station 'dockiing drive '. www.Newegg.com has what need you.
-
I have recently retired and stopped my toe Adobe Pro subscription. Now I can't open a pdf attachment in an email with Adobe Reader. How can I solve this problem?
Ok. Then, the next thing to try is to right click on a PDF file, select open with, choose the default program, and then select the drive in the list and check the box always "use this application...". "and click OK.
Maybe you are looking for
-
can not connect to windows live messenger
Original title: 8004886c can't connect to windows live messenger
-
Copy JavaScript files in directory Playbook
I'm trying to copy pictures from my application directory in the playbook photo folder. I did not javascript in a long time and not sure what I am doing wrong. Can someone tell me please the right direction? Thank you
-
BlackBerry smartphones can not access the call log?
Anyone know what to do because my call log tab does not open? The list of contacts works as well as the phone's keypad.
-
I was using a pirated windows, and I'm moving to the original... and I bought officially, but I used the pirates! so, what can I do? can I install the windows normally?
-
Delete several active at the same time
Hi allI did a search in my interface of contributor for a keyword and it sent back me active around 400. Now, I want to delete all these assets.Is it possible to delete it all at once or I have to delete all these one?Kind regardsNelash Jindal