Installation of the third hard drive? I have a Pavilion 1090 t.

Similar Questions

• Installation of the 2nd hard drive internal

  I have a HP Pavilion a6750y, with an internal hard drive and a LightScribe DVD Super Multi burner.  The system is running Windows 7 Ultimate 64 - bit, with 8 GB of RAM.

  I want to install a 2nd internal hard drive... If all goes well.

  The original hard drive goes SATA1 on the motherboard.

  The DVD player will SATA2 on the motherboard.

  So, obviously, I chose SATA3 on the motherboard to connect my cable purchased and only plugged SATA 2nd hard disk.  So far so good.  Now the problem...

  I did not know that the SATA drives have a power connector different than the old records.  So, a single SATA power connector goes to the original drive and the other for the DVD player.  There is no third party.

  All other power connectors are old white 4 holes plastic ones.  And like 5 of them.

  If I'm screwed?  How can I get another SATA power connector?  Are there adapters that connect to the 'old' white maybe?

  Or do I have to buy a new power supply with 3 SATA connectors on this subject?

  Thanks for our help.

  -Mike

  Hi Mike,.

  All you need is an adapter like the one on the link below.

  http://www.Amazon.com/Connectland-CL-CAB40021-Molex-power-cable/DP/B003L5D0OE/ref=pd_cp_e_0

  Kind regards

  DP - K

• Correct installation of the new hard drive for Windows 7

  Have a disk hard fatal crash with Dell OEM Windows 7on, so I bought a new hard drive compatible system and have my old system Win 7/recovery of data on a memory stick. It's been years that last I formatted, partitioned and installed an operating system on a new hard drive and I totally forgot how it's done. Vaguely remember some DOS commands were required to work out of BIOS (?). Can anyone list the individual measures to be taken, assuming that the hard drive is physically installed and turned on? It would be a great help!

  Unless this stick memory has on her installation files as well, you cannot reinstall win7 on the new hard drive

  You will need the DVD / or the ISO of Win7.

  ]

  And no you do not need BACK. Just the dvd or ISO / to boot from. Then you can format / partition in the configuration screen

• Try adding the third hard drive for HP p6232p

  Hello

  I'm pretty well a beginner, so I hope I can explain this well.

  I have a new HP p6232p desktop computer.  I am interested to install a new HDD SATA Seagate Barracuda 250 GB I have on-site as a spare.  (I already have OEM and a second hard drive installed and working correctly.)  I wonder if this computer allows a third hard drive.

  I placed the third disc in a pleasant and safe place and plugged the thin cord, red. This cord will go clear hard drive to a blue connector on the motherboard.  (There was also a yellow slot available.)  For the wide cord, I used a short adapter to change the pins to four pins.  It has been connected to one of the white gizmos, four holes (sorry, don't know what to call it).

  So, I pulled to the top of the computer and it does not automatically detect the new hard drive.  In the BIOS, there is no indication of it.  I couldn't not listed in Control Panel - Device Manager - hard drives.

  I bought the hard drive hoping to resurrect my old computer, which did not work.  As I can't return the drive to the store, I thought I would go ahead and try to put it to good use.  (If it does not work maybe I'll try to sell it on eBay or Craig's list).

  I wonder what I'm doing wrong?  Any thoughts (in easy to understand language, please ) would be most appreciated!

  If the bios does not show the port you plugged into with an attached device, then a port this bios is disabled or if you have equipment/wiring problems.  If you click on the bios ports and press ENTER, you should be able to see if it is enabled or disabled.  This is how works my bios.

  I don't want to scare you, but there are a lot of posts here on Seagate hard drives.

  Once the bios sees the port with your attached drive, then you should be good. If you use a new reader new and unformatted, then once you start, then go to disk management and look for your new device. You will need it initialized by right mouse clicking on your new device and then proceed from there.

• What to do next after the installation of the new hard drive.

  I just finished installing a new hard drive in my HP Pavilion dv4-2049us laptop computer Windows 7. What should I do to get the operational computer then?

  for example I have to re - install Windows 7 from the disc? Or, do I have to use a disc of "Boot"?  BTW, what is a boot disk?

  Hello

  Please try this: in the first screen, select internal CD/DVD and press F10 to save the configuration. You will need to switch it to HARD disk after loading the operating system on your machine.

  Kind regards.

• replace the old hard drive with nine in Pavilion dv2019tu

  my laptop had toshiba 320 GB hard disk that does not work, then I want to install a new hard drive to it, will this model support 1 TB HDD?, and what is the maximum ram it can support?

  Please quick answer, I do not have any other pc to continue my work.

  Your Service Manual:

  Manual

  Max Mamory is 2 GB. I'm sorry.

  AMD model series versions has been reported to have difficulties even with hard drives of 500 GB. There has never been a logical explanation. Since it is SATA it must accept any drive SATA 2.5 inch width 9.5 mm thick. However, the reports were many and not lightly ignored. I can not find plug on the dv2019tu so if it has an Intel processor, I would say that you're good to go with a 1 TB SATA drive, as long as it is not thicker than 9.5 mm. Also pay attention to the connecting piece plastic on the old hard drive. It is necessary to connect the SATA ports on the drive to the motherboard. You have to use it again.

• Location for the second hard drive to 500-164 Pavilion

  Cannot find place to install the second hard drive in the box. Where it is installed?

  HP has not produced a manual upgrade. Please see this manual, because it could help you.

• Satellite Pro L650: Windows could not complete the installation on the new HARD drive

  At the present time, I have a 500 GB HARD drive installed. As soon as I got it, I did a recovery on 3 DVD media.

  I just tried to replace the HARD drive with a 1 to one. All copied OK and after dvd 3 that I was told to release the dvd. I did this and the computer turns off. I turned it on and it started to (don't remember the exact words used) set the drivers.

  However I have now received the message that "Windows cannot complete installation" and telling me to reinstall. I did it, but after the steps above have repeated the same message appears.

  Pls help.

  I don't see why my computer should be limited to a 500 GB HARD drive.

  Thank you

  Hello

  The computer is NOT limited to 500 GB HARD drive
  You can use more big 500 GB hard drives. You have confirmed that the laptop supports 1 TB HARD drive and the system recognizes the 1 TB HARD drive.

  The problem could be the use of the recovery diskette. Why?
  Because the recovery disk creates the same partitions that were available on the 500 GB HARD drive. This could create problems of system due to the large size of HARD drive.

  Solutions?
  Well, I think that you could install the system by using the clean installation of Microsoft Windows disk.
  Missing other drivers or tools can be downloaded from Toshiba page.

• where are my drivers? new installation on the new hard drive

  I have a dimension e510, I put in a new hard drive. I got the windows xp disk, I added when I bought the computer. In general, the hard drive is partitioned or something with the operating system on the hard disk of windows xp.

  In any case after I installed widows xp, everything works except that I have the yellow question mark by 'other devices', I noticed that when I tried this computer with my main computer of the network. All of the devices under the heading other have no driver video Ethernet, PCi, for example - video works as I have a video card.

  So I tried to install the drivers and windows is unable to find them. I still have the installation disc into the computer. Being one of the drivers for the Ethernet - i cannot access the internet to get drivers. Help

  OK, I found the drivers on the dell site. I was able to install or update several drivers that I didn't need. the pilot opne I need comes in a cab file inpenuxp.cab.  Where do I put this? I've tried several things that work. When I low laoded the other driver of dell updtates, they all seemed different and they are all installed without problem

  Hello

  You will need to download "Intel PRO/100 VE Network Connection " of Dell on a USB key and install the driver for your Netbook have access to the internet.

  A CAB file is a ZIP , CAB file is just the Microsoft format for a compressed folder save bandwidth on their server they save as aCAB , you can open and then select all and extract here where the files need. For the most part, these files will file dell cascading, images and Html pages.

  Try to download the network card in your computer to get the correct driver installed for your problem.

  NASS - http://www.nasstec.co.uk

• Install the new hard drive, I have no os or backup recovery disks

  I have a HP G62-340US notebook pc-product # XH066UA #ABA, OS is windows 7 64 bit.   The hard drive does not work so I'm relpacing with a new.  I have no os disks and any backup recovery.  When I turn on the laptop there that peripheral black splash screen States 3FO hard drive not found.

  My question is that I don't know what drives I need to order at HP to reformat my laptop.  Again, I have no backup disk or any disks. I lost everything on the laptop. which is ok.  So it's like I'm starting with a blank slate.

  Should I order the kit Media Ststem recovery for consumer notebook, which is a set of 4 discs?   and that's all that I need to install to return to the State wherever it was when I bought it new.  Are there other discs that I need to order or just that?

  Thank you very much for your help.

  Hello

  You just order a SET of recovery disks and this disc set will bring your machine to update 1 than why we call back to factory settings. Please check how to order from the following link:

  http://support.HP.com/us-en/document/bph07143

  Kind regards.

• Can't activate Windows 7 (OEM Version) after the installation on the new HARD drive

  Hello, recently my HARD drive crashed and I replace it with a new one, but after I reinstalled my window 7 (OEM Version), I can get it activated. The error code is 0xC004C017, I tried to activate using different methods, but the options given to me is only 1) buy a new product key online 2) try a different product key for activation of Contact 3) Microsoft to help solve this problem. There are no other options available to me as the activation of the phone.

  Please tell us how can I activate my Windows 7 on my new HARD drive.

  Thank you

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 installation on the new hard drive failure

  Install Windows 7 on a new hard drive. The new HDD is 750 GB Sata 3 GB 7 200 RPM.

  Windows 7 will not finish installing.

  Commissioning of repair using windows in the drive disk cannot complete until the end of Windows 7 install.

  I had installed Advanced. Creates a new 30 GB partition. Windows will create a 100 MB partition. I installed Windows 7 on the 30 GB partition. It will go the whole process until the completion step. It restarts, the blue screen appears. Where, it is said,

  (Attempt to Reset display driver and recover from Timeout failed.)

  If market, it will start to the top and do the samething.

  Before that my old hard drive went bad, I did a Windows 7 upgrade and updated all the drivers. Everything worked very well.

  Now, this is a full installation of Windows on the hard disk again.

  Here is the computer info I had saved.

  HP Pavilion a6250z PC
  -Genuine Windows Vista Home Premium (32 bit)
  -AMD Athlon (TM) 64 X 2 5600 + dual core - 2.8 GHz
  -3 GB DDR2 - 667 MHz dual channel SDRAM (2 x 1024, 2 x 512 MB)
  -512 MB NVIDIA GeForce 8500GT, DVI - I, TV, HDMI out
  -802.11 b/g USB Wireless LAN card & USB external modem
  -HDD 400 GB 7200 RPM SATA 3 Gb/s
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -16 x Max DVD-ROM
  card reader memory 15 - in-1, 1394, 3 USB, audio
  -Tuner TV ATSC-NTSC with PVR, FM tuner, remote control
  -7.1 audio channels w/front audio ports integrated

  What I am doing wrong?

  Thank you for helping me

  I solved my problem.

  I replaced the NVIDIA card and did a fresh install and everything works fine.

  Just a ton of updates and it will be like new.

• Windows XP operating system installation on the new hard drive

  My hard drive crashed on my Dimension 3000 desktop computer and I am trying to replace. I managed to install Windows XP Pro and all the drivers. My problem is that Windows application authentication code, when I enter what is on the side of the tower that sometimes invalid. It's prompting me to buy another license.

  Any ideas?

  bdives

  
  

• I get a recurring answer ' * stop: 0x0000007B (0xF7BFE524, Ox0000034, Ox00000000, 0x00000000) "after the installation of the new hard drive into the computer laptop viao.

  Tried to boot from a hard disk with a blue error screen. Replace the SATA drive with 500 GB drive. Then drive formatted and installed Windows XP Pro and McAfee 2011 office. Same error!

  Hello

  I suggest you to visit these links and check if it helps:

  http://support.Microsoft.com/kb/324103

  http://support.Microsoft.com/KB/314082

  It will be useful.

• Try to find a former serial number from a previous installation on the old hard drive. Any help?

  My old pc motherboard crashed and I'll try to find my previous serial number. Any idea on where to find it in the old installation?

  Hello

  If the serial number has been saved with Adobe, then support would be able to find it.

  Please contact customer service to help you locate the serial number.

  ^ Ani