Have the HTC sense - lin ked by Bluetooth to the car radio. Is there a way to set the phone to automatically after a certain number of rings?

Similar Questions

• My speakers does not work when I talk on the phone but when I have my headphones or have the phone up to my ear people hear me perfectly fine, please help.

  My iphone does not work on audio speaker and everything is perfectly fine, but when I'm on the phone and put my phone on speaker, no one can hear me not at all, but when I have the phone to my ear, or have headphones in people can hear me very well. I don't think it's a software problem, that my phone is updated with ios 9.3.5. Can someone help me please on this issue.

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again. You won't lose data.

  Have you tried plugging the headphones into an output a few times?

  Does say "headphones" when you toggle the volume and no headphones attached?

  More tips here:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

• Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  For Apple ID - Apple Support two-factor authentication

  If I can not connect, how I again to access my account?

  If you can't sign in, reset your password, or receive verification codes, you can account recovery application to restore access to your account. Account recovery is an automatic process designed to help you back into your account as soon as possible while denying access to anyone who might be impersonating you. It may take a few days - or more - depending on the specific account information, you provide to verify your identity.

  It will be your option. If you try to find an iPhone with locking Activation that you don't remember the password, you can remove the account from the iPhone with the help of Apple's Support with the receipt of the initial purchase of the iPhone as a way to prove that you are the real owner of this iPhone.

• I just installed ios 9 today and tried to set up "Hey Siri" on my iPhone 6 Plus.  I have the phone on and said "Hey Siri" so many times that I am blue in the face.  He just telling me "Sorry doesn't quite have that." Try again. '  I have a

  I just installed ios 9 today and tried to set up "Hey Siri" on my iPhone 6 Plus.  I have the phone on and said "Hey Siri" so many times that I am blue in the face.  He just telling me "Sorry doesn't quite have that." Try again. '  I also tried to reset the settings of the phone under the "Reset" option and again without success.  Everyone knows the problem?

  Not having is not the issue here.  Have you tried to ask a question after Hey Siri? Should really wait that long either.

• Essbase have the ability to automatically forcing a user to change their password after a 90 days

  Essbase have the ability to automatically forcing a user to change their password after a 90 days
  . 11.1.2 we have that, but coming to 11.1.2.3.500. I can't change this property under Essbase server. Shared with native directory services.

  any work around that?

  The workaround is to use an external directory as MSAD where password options are controlled at that level, recommend Oracle uses external directories for users on the native of directories.

  "EPM system supports native users, but I can use them in my deployment to production? Recommend the Oracle?

  Native directory allows you to create native development and test users; However, Oracle recommends strongly that you use users of the directory company in production deployments. This is because password policies are not supported for native users. In addition, after you use the native users for the development or test, Oracle recommends that you disable or remove them andalways use users in the corporate directory. »

  See you soon

  John

• Is there a way to set the font size as default in WordPad - Windows 7?

  In Windows 7, is there a way to set the default value in WordPad to Courier 10? I see no place to set the default value. I save my changes and when I close and reopen the document it's back to Courier 11 and the spacing is all off. I create documents for customers who need very specific settings (including a 10 - PT font.) to copy and paste resumes to online applications. Once I have send the plain text for them, they, also, versions I can save these specific parameters. It's extremely frustrating; in XP and Vista, I was able to save 10-PT policy documents. I don't see why this was changed. Any suggestions? Anyone at MS have the power to solve this problem?

  I created a document called a new Doc - highlighted space vacuum-made my the font changes and size and saved.  So when I want a document with my size settings and the police, I opened my new Doc.  Make sure that when you save it you rename this new Doc remains empty.  I created a shortcut on the desktop and open the new Doc instead of WordPad.   I guess you can do your employees.  I hope this helps.

• Is there a way to set reminders for multiple documents at the same time?

  Is there a way to set reminders for multiple documents at the same time? Now he must go through a list, manually click through a series of options, then select it. If I send more than 300 different documents to individuals at a time, it becomes tedious. Quick. A way to save me the trouble would be so so so appreciated.

  Hello Lindsayb123,

  We do have an option to set a generic reminder under choice of account in the accounts of the company and can be set by going to the tab account-> account settings-> send parameters and set reminders.

  Let me know if you need more information.

  -Usman

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• How can I get the page to refresh after a certain period of time, so he jumps at the beginning of a page of the site? Its for an exhibition

  Hello

  I'm in an exhibition space where I need to post my Muse site in offline and locally on the desktop. I'm looking for a way for the website to refresh after a certain period of time, so he can come back at the beginning of the page. Can anyone help? Please, I beg you!

  You can try the steps here:

  http://StackOverflow.com/questions/2787679/how-to-reload-page-every-5-second

  http://StackOverflow.com/questions/17886578/refresh-part-of-page-div

  http://crunchify.com/how-to-refresh-div-content-without-reloading-page-using-jQuery-and-AJ ax.

  Thank you

  Sanjit

• I'm paying for telephone folios and the 1800 number that is advertised on the shopping cart is not correct - what number I ring in Sydney, Australia

  I'm paying for telephone folios and the 1800 number that is advertised on the shopping cart is not correct - what number I ring in Sydney, Australia

  Do you mean you want to buy downloads additional folio? If so you are a Pro user or company, connect to your DPS dashboard and click on the "Contact Support" link at the bottom left

• I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

  I have difficulties to use the Bluetooth on my phone i 5 c with my car radio/phone and I pads. It was working fine until today (July 20, 2016). I tried to turn off the phone, re-start the phone and also deleted the items matched, but goes on to say "the connection failed". I've also updated the phone to 9.3.3. But still unable to pair anything with my i phone 5 c

  Hi Charley777!

  I understand that you are having problems with your iPhone Bluetooth function.  It is important to have your iPhone Bluetooth works properly, so I'm pleased to offer you a few resources.  Here are two articles of support with troubleshooting steps.  The first is specific to the car stereo coupling, and the second applies to other Bluetooth devices.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  Thank you for using communities of Apple Support.

  See you soon!

• Why my laptop does not have the orange button Firefly after that I updated to version 5.0?

  I still have the usual items in the upper left corner: File, Edit, View, history, Favorites, tools, help.
  Then there are lower than my Web page tabs... Everything looks the same as the page getting started, that Firefox has for beginners.
  I'm not super intuitive with computers, so forgive me if this is an obvious solution. Thank you.

  If you have customized your menus or toolbars, then Setup can not you go to the abbreviated menus. To switch manually, go to

  Menu view > toolbar > uncheck the Menu bar

  ---

  In the future, you can display the classic menu temporarily bar by tapping the Alt key or by pressing the F10 key.

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• I replaced my Windows 7 64-bit system drive and now I have the "Not genuine" message after an update failed

  I have a Windows 7 64-bit system I bought a provider on the local computer for a long time with Windows installed.

  I replaced my hard drives of 500 GB (mirrored RAID configuration) system with hard drives of 1 TB.

  After replacing the readers, I also installed a set of Windows updates. We update failed. After you restart the computer, I ran Windows update again. It seemed that all upgrades completed.

  HOWEVER, I now have the message "this computer is not running Genuine Windows". Windows Indexing is not running, send me problems in Outlook and elsewhere.

  I saw discussions on the online forum on the problem "Not genuine" resulting from an update of Windows failed and resulting also to change the hard drive.

  I led Activation (slui.exe 3) typed in the product key from the sticker on the computer and it activates OK but does not erase the message.

  I clicked on pay online now and ran legitcheck.hta and my system has failed validation. The options are to buy or to perform a new installation of Windows.

  I have a lot of programs installed on the computer, and I can't lose all configuration data and reinstall all programs. That would take several days and I would not have a system can be used in the meantime.

  I ran the Microsoft Genuine Advantage Diagnostic Tool (1.9.0027.0) and have these results below.

  There are a lot of files file mismatches and "tampered with". I believe that this is due to the update has failed.

  I thought to manually rerun all updates that goes back to the date when first I struggled (about a month). However, I wasn't sure if this solves the problem or make worse it.

  You can leave the data below what actions I need to take the next?

  I am a independent and use this computer to work. I have backups of my data files, but it is many installed applications that I can't do without.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - BJ6HF - KMG9Q-J439J
  Windows product key hash: 7vmpu6718rYAfG77 + 92w0F + H5ks =
  Windows product ID: 00371-OEM-9043973-76881
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {F07BA505-8A75-4DE1-A86D-1DE0A0C990B3} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Maxthon\Bin\Maxthon.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F07BA505-8A75-4DE1-A86D-1DE0A0C990B3}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-J439J00371-OEM-9043973-768813S-1-5-21-1148677520-472990491-2516340718Gigabyte Technology Co., Ltd.. EX58-UD4P Award Software International, Inc.. F8 20090511000000.000000 + 00055213107018400FE04090409Time(GMT-08:00) Standard Pacific03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00180-439-776881-02-1033-7601.0000-0992014
  Installation ID: 011105233533098330628726208714444670448455661326055071
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: J439J
  License status: initial grace period
  Time remaining: 40740 minute (s) on (28 day (s))
  Remaining Windows rearm count: 3
  Trust time: 15/04/2014-15:56:27

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 4:15:2014 16:05
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: MgAAAAEAAAABAAEAAwACAAAAAgABAAEAHKKujALwWHXoY8KP8BfeiPKuALa26c6b6oI =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  EUDS GBT
  TAMG GBT GBT B0
  SSDT INTEL RCM PPM

  Hello Ray,

  Please provide a detailed description of your query.

  1. What are the troubleshooting steps you have tried?
  2. What exactly happens when you try to run "slui 3 '?

  The question may arise simply due to bad drivers from the Intel Rapid Storage Technology technology series. So, I suggest you to update the drivers Intel Rapid Storage from the following link.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapkw=Intel+rapid+storage

  In addition, please try to activate your Windows by phone, as described below:

  1. Click Startand in the search for box type: slui 4 and press ENTER.
  2. Select your home country.
  3. Select the phone activation option and brace yourself for a technical support representative get activated.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I still have the issue of permission after update latest version of LR

  I still have the permission problem after update latest version of LR even I already did what you suggest in the other discussion.

  I found the solution.

  You must follow the steps below:

  • Open Finder
  • Choose the menu go to, select go to folder
  • Type in ~/library and click go
  • Open the Application Support folder
  • Give full read and write permissions for everyone to the Adobe folder
  • Similarly, you have to give all the permissions file to Adobe location: Macintosh HD/Library/Application Support/Adobe

  I can made the order wrong earlier.

  Thank you all