I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

Similar Questions

• IPhone Bluetooth pair with car even when I do not have a call

  I recently started having a problem with my IPhone 4 s automatically picking up the sound system in cars, even if I did not call. This happens as soon as I turn on the car. When I press the keys on the phone I hear the click key in the car sound system, and the radio is removed. This happened with a Chevy Volt and a Ford CMax, then this is the phone, not the car. The only way I can make the radio work is to turn off the Bluetooth on my phone. It started only in the last week or two and I downloaded an update of the phone on the right, then, that could be the problem. Any suggestions?

  If the phone is paired with the car, it will happen.

  Can you not turn off the twinning/forget the connection?

• Does anyone have problems using Dreamweaver CS5 with Windows 7?

  I just started using Dreamweaver and thought I could import the source code of a HTML newsletter template I had and just update with the new text and images. I started a new HTML page, any source code in the workspace, and then began to be updated. However, all I get is code when I try to get a preview of the file in the design view or a web browser. What I am doing wrong? I have attached a CAP to screen what I see.

  Thanks to anyone who can help!

  I have started a new HTML page, imported the source code in the workspace

  You stick it in Design view?  Show us the first 10 lines of code in Code view, please.

• I have problems using the parental control. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  Have you followed all the steps like that?

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-parental-controls-to-filter-websites-in-Windows-Vista/

  It is an alternative.

  http://explore.live.com/Windows-Live-Family-Safety?OS=other

  http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

  If this post answers your question, click mark as answer .

• Problems with speakers using Bluetooth (a2dp) with several Windows users

  I have the bluetooth speakers (Yamaha NX B02)
  they are easily configurable in bluetooth stack Toshiba everything works
  as long as I use my profile

  If only someone else wants to log on to any other profile (Windows XP Home edition)
  battery Bluetooth pair with the speaker Yamaha

  I disconnect the speakers on my profile
  Speakers are in pairing mode - they are on the list of devices to connect
  but they just don't connect.
  Once they are paired on the profile "User1" on "Laptop1".
  the "user2" or any other on the same "laptop1" aparently is to buy a new set of speakers
  coz this standing right next to him are to be used when you are logged in as "user1".

  First of all I really don't see why the bluetooth stack holds the list of devices, and a different configuration for each user?
  However - is it possible to IMPORT connection parameters of device somehow of my profile to any other
  Or maybe there is something else I should do to be able to pair it with my speakers no matter as to which I am connected now

  Thanks in advance

  And YES - the Yamaha set sounds great - I'm really happy

  Hello

  I m not 100% sure that if I understood exactly you <-->Bluetooth speaker problem.

  According to your message, you can't pair BT speakers during the second use Profil2 if the speakers are already paired with the mer1. Am I wrong?

  Well, in my opinion there are nothing wrong because the speakers were already connected to the laptop using the BT. to my knowledge you cannot connect any BT device if it s already connected using another profile.

  I think you should always disconnect the BT speakers using the mer1 if you use it n t. Then another user using Profil2 would be able to connect the BT speakers.

  Best regards

• Are there problems using Adobe CC with 10 Windows?

  Are there problems using Adobe CC with 10 Windows?

  Hi Michael,

  This might be useful: https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  Kind regards

  Sheena

• Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

  I use the Oticon Streamer Pro 1.3 to connect my hearing aids to my iPhone 6 more via bluetooth.  With the IOS 10 update the streamer keep disconnection, reconnection and disconnect.  I tried forgetting the device and once again pairing with the iPhone.

  Hi, Dick

  I have similar problems with my hearing aids Starkey.  iOS 10 broke the bluetooth.  I've been working with Apple, he's broken, no solution until the next update.  Incidentally 10.0.2 is not the solution

• iPhone7 problem of Bluetooth in the car

  My new Iphone7 seems to have problems bluetooth in my car. Everything works but the sound goes down sometimes (often) when I listen to music. I had no such problem wiyh my 6s and IOS10. I tried to reset it but the problem persists. The iPhone is recognized by dansMon Toyota radio, but the noise falls just as it was a radio in a tunnel.

  Hi brunowajskop,

  Congratulations on your new iPhone 7! I love listening to music in my car, so I can understand your concern about the sound drop everything when playing music. I'll be happy to help you to provide some information for you.

  I know you said you did troubleshooting on your own, and I, thank you for that. Just to make sure that all the bases are covered for troubleshooting, I would like that you take a look at this article and follow the steps, you're not done.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  This article was written for the case of Bluetooth connectivity issues; However, the steps here are always topical to your current situation.

  Also, here is an article on the potential sources of Wi-Fi and Bluetooth.

  Thank you for using communities Support from Apple. Have a good night!

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• I have problems using the new adobe flash update that I just downloaded.

  Some sites are not allowing me access to what I download the most recent update for adobe flash. So I did, but afterwards, the websites are not recognizing that I have. I didn't know if it was you or the other Web sites. haha I'd really prefer not to start using chrome so please help if possible.

  Well Chrome is a good browser.

   After you closed Firefox and ran the update, it then should have finished and opened the default browser to the Adobe web site that has a spinning box, this will say you are up to date. Did this happen for you.
   If so then I would check Windows list of installed program and see if you have flash and see if that date corresponds with the day you updated. The version number should be 10.3.183.7
  

• I have problem using PDF fillable/recordable t1135-fill - 14e.pdf

  I was directed to a page after clicking on the link to fill out / recordable t1135-fill - 14e.pdf. It says to upgrade to the latest version of Adobe Reader. I'm going in a circle after the upgrade.

  I am hoping to be able to submit online, print the form, complete it by hand and goes to the post office at post.

  What browser on OS?

  You may need to try another browser if you use Chrome...

• I have problems of DNS suffix with my box of Windows Server 2003 and Windows XP.

  original title: issues of DNS suffix

  I have some errors of suffix DNX, I am running 2003 server and XP SP3 on my desktop PC. My DNS suffix repeats my domain for example name twice by aj.urs.com

  AJ. URS.com

  URS.com

  It's not that prevents me from exercising the normal functions on machines but can't figure out how to fix. FYI, in my opinion, using Mcafee EPO because of problems, suggestions?

  Hi Karen,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• Problems using Bluetooth Lenovo Laser Mouse with Helix

  I'm from the Lenovo Bluetooth Laser Mouse to use with my Helix. Works well except that from time to time it just stops working and becomes completely insensitive. I can get it going again by going to settings > change PC settings > devices disconnected from the list of connected devices, then using 'add a device' to add back to new.

  Anyone else having this problem and has found a way to fix it? It's a bit annoying to have to keep doing this from time to time.

  I have the mouse Apple Magic Mouse (BlueTooth) and had the same problems.

  To fix this I had to disable the driver from beeing allowed to go in hybernation.

  Go to the device, under BlueTooth Manager choose ThinkPad Bluetooth 4.0.

  In properties under powermanagement delete "Allow the computer to turn off this device..."

  See if that helps.

• BlackBerry Smartphones having problem using BB Tour with Mobile 3 Australia network. Help please

  The problem I have with my BB Tour is I can't make call, retriving phone number (example: 0401010134) of my directory which is free on all names country code. The message that I received from operator was "" the number you dialed could not be connected, please check and try again ", however if I manually dial the same number (example: 0401010134 ) without referring to the phone book, the call has been thru without problem, but of course I don't want to deal each phone number whenever I need to make a call because I paid an amout of $ for a gadget" technology advanced.

  Then I discovered that if I change all the phone number in the phone book with a country code (for example: + 61401010134 ), the problem is solved (temporary), I can make a call, retriving the directory phone number now, but when the same person called, their name does not appear on the screen because the recognized only mobile phone the mobile number that only with the country code at the beginning of the phone number which will not not a local call. Because the mobile phone is not recognized without the country code phone number, so I guess that the camera cannot associate name stored in the directory so I think it's the reason that the name will not appear in the display of the number.

   

  To overcome this problem, I found a key solution - in 2 same with and without country code phone number in the same name (for example: John WORK: 0401010134 / WORK 2: + 61401010134 ), but another problem. The ringing will be the default value no matter how adjust ringtone custom in the Setup folder because the mobile phone detects the duplicate phone number (I guess!, can someone enlighten me please ~ ~).

  It's so frustrating, does anyone have the solution for this?

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

• Problems using Mac Mail with Hotmail address

  I had ZERO problems with Mail and my Hotmail e-mail address for years until Sunday evening. I thought that maybe the Hotmail servers are down and cannot send e-mail that he requested my password, but it says that it was not correct. (but it was) Today I open mail and get the same message and my iPhone was not able to receive mail. After deleting and adding the Hotmail account on my iPhone, it works and receiving mail. On my Mac, it's another story. I removed it without any problems, but when I went back to add an account, it says the account already exists. My Hotmail account is not listed in my internet accounts and not showing is not on my mail. I tried setting up with a fake account and manually enter server information and it STILL says that the account already exists. Is it possible for me to again access my Hotmail on my Mac mail? Thank you!

  After digging around some more to the forums I found my resolution. I had to remove my iCloud account (which uses my hotmail email address) then add my Hotmail email, then add my iCloud account again.