have XP and upgaded to the vista

Similar Questions

• cannot stop at several new tabs to open boxes at least three every time I have leave and return to the home page or restart Firefox

  cannot stop at several new tabs to open boxes at least three every time I have leave and return to the home page or restart Firefox

  Hi TGreybeard,

  Have you looked at the Knowledge Base article Firefox opens several times empty tabs or windows after clicking on a link ? There is some good information in there that should help you to solve the problem.

  Hope this helps!

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Every time I have download and install updates to vista security I have reinstall mozilla firefox, why?

  Whenever I have download and install the vista security updates I lose Mozilla Firefox. The program and the icon still exist but do not respond. By clicking on the icon or clicking on the program files does produce absolutely no response.
  So any time I install updates, I have to run internet explore and firefox redownload. Most annoying. Help.
  P.S. Yes, firefox is my default browser.

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Help, please! A master hard disk partition information lost and cannot start the Vista system

  I have Vista with my dell desktop computer.  I guess I got a virus that has deleted/messed my main hard drive.  All of sudden my computer was dead and when I try to restart, I found I can't boot the system.  I loaded the DVD for the resettlement of Dell to come with the computer and try to install it.  But it shows "Disk 0 unallocated space" with 222 GB and 'Disk 0 Partition 2 Recovery' with 10 GB.  I could not install Vista on the first, as it says "Windows must be installed on a partition formatted in NTFS.

  How could I solve this problem?  I could not allow me to format the drive because there a lot of data, that I just can't lose.

  Any help is very welcome!

  Marco

  http://support.Dell.com/

  Problem with the recovery process, contact Dell at the link above.

  It's recovery process from Dell, NOT Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon...

  Mick Murphy - Microsoft partner

• My office has just done a repair XP after a hardware change and now all user accounts have disappeared and he asks the administrator password when connecting!

  We have a unique system of Windows XP that run the software of engineering for certain calculations. All other systems running Windows 7, but what a XP system because it's the only thing that our calculations software runs on.

  CPU of the XP computer died on us and we had to replace the card mother and CPU. After the change of equipment, following Microsoft's OWN guide on the running an XP repair, we ran the system repair and got all the way to the login screen (no blue screen not as before repair). However, none of the accounts are there and he asks an administrators password. The system has NEVER had a password to our knowledge, it was built in the House, and all simply by clicking on the Administrative login asks for a password.

  What can we do? We needed this fix before today and wait for the repair of the system to do. Is it possible to enter the system to run the software? We tried the SafeMode (all forms) and they all will ask a password after Windows loading.

  It's so frustrating.

  (PS I have been building computers for nearly 15 years and have never had this happen)

  Thanks for the quick response. I looked into the system with a "start-up" program All original profiles seem to still be there. I don't know how to make them appear well. Can you direct me or tell me, how to make profiles see the place?

  The biggest problem, outdoors is not be able to sign more, is that the engineering calculation software is locked to this PC. It can be installed anywhere else without having to pay for a VERY new (I think that thousands of dollars) expensive key or a new version of the software.

  :(

  Yes, it's a problem.
  I believe you can use a UBCD4Win CD or Hiren Boot CD to locate and right click on the files you want to change. And then, if you properly in your repair facility, you change the attributes after you're done.
  Some guides are better than others. And here's one that I like:
  http://www.windowsxpprofessional.WindowsReinstall.com/indexrepairguides.htm
  If necessary, hire a PC Tech. It's much cheaper than buying a license that is thousands of dollars!

• My date and time to start going backwards in time and years. I have change and new commissioning the same thing happens. __ __

  I have a windows xp program. I did a reinstall System Saturday and it does again. My anitvirus and spy programs are up to date. I did a full scan on my computer at the same time and nothing came. I recently added explore 8 - does this have something to do with the problem. I installed today... but the problem of the time and the date has been going on for two weeks. How can I fix this problem?

  Replace the small battery on the motherboard. If you have a desktop computer, it's very easy to do. If you have a laptop, take the machine to a competent local computer technology, not a BigComputerStore/GeekSquad type of place.

  How to replace the CMOS in your PC battery - http://www.liverepair.com/encyclopedia/articles/cmosreplace.asp
  How to replace the CMOS battery - http://www.computerhope.com/issues/ch000239.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• Can I have "PnkBstrA and PnkBstrB" under the list of exceptions in Windows Firewall?

  Original title: Firewall exceptions

  Before we begin, I would like to thank those who helped me in the past and as it may seem, I ignored, I tend to use the internet services and e-mail in a chaotic way, but if I forgot to answer or acknowledge a contributor I apologize. My question is about two entries in the list programs and services on the tab exceptions in firewall windows PnkBstrA and PnkBstrB, and if I can uncheck and remove them I do not play any type of online games which I am told they are connected?  I use XP (SP3) to House thanks.

  Whack em.

• lost all programs and docs on the vista help please

  the system makes the update then rebooted when he returned to this subject had lost all descktop ikons and all the photos, but they r always at the poster in the c drive and his commimg now upward with hard drive failures

  Hello

  are you sure it was an update that caused it?

  If it was an update follow these steps:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  __________________________________________________________________

  but also read this information too as you mention data missing and hard drive errors

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  :

• I don't know if I have subscribed and downloaded to the right Acrobat?

  I don't know if I have subscribed & downloaded the Acrobat on the right?

  I think it's better if I start all over again from the beginning, I don't know how & would rather hame someone on the phone it walking.

  Hello

  If you subscribe to the Acrobat Pro DC program then please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of Acrobat.

  Then, restart your machine and install the latest version of the player from here:

  Download Adobe Acrobat DC (DC) | Company or VIP

  Let me know how it goes.

  Kind regards

  Christian

• I have Adobe have accessed and cannot find the code for redemption for creatively Cloud

  Help! I'll try to find my redemption code for the cloud creative plan that I signed up for yesterday. Have followed all the steps, signed in my Adobe ID etc. and can't find it. Can someone please help -thank you, Ona.

  There is no redemption code.

  Once you have signed up, you sign in to your Adobe account, download the Cloud app then download the software.

  Will be asked to enter a redemption code?

• My website link works in my SWF when I test in Flash Pro, but after that I have export and try out the program, it won't work.

  I made a banner in Flash Pro and adding a button. I went through the steps to make the button to take me to a specific web page and it works when I test it in Flash Pro. Once I export and try to click on it outside the program, my cursor turns into a hand click, but by clicking on the button does nothing. How can I fix?

  Thank you @kglad for your reply, I will consider. Tired of searching, I decided to download just for the Web (system used by my school) and voila... the buttons for brought great external links. =)

• "The identity of the website" button has disappeared from my URL bar. I don't know when or how it happened, but I have heaven and Earth for the answer but nothing.

  My URL starts directly without any button on its left.

  Hi chiragsangoi,

  I agree with KadirTopal, except if you make changes in UserChrome.css

  Thank you

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• migration to Vista to W7 stops and more at the end of the last step

  I am a Vista Home Premium to W7 Home Premium upgrade in place and he got to the last step, had transferred more 800 000 1107100 files when he stopped, restarted and regularized at the vista installation. The SETUPACT log file was the last lines. I am on an HP
  Pavillion w / Vista SP 2, duo P7350 CPU, 4 GB RAM 64 bit OS

  Any help appreidated

  2012-03-08 21:30:52, info [0x0a0024] run UI ProgressInfo\MigMachineApply task: EndProgress
  2012-03-08 21:30:52, info [0x08059e] MIG leaving Callback_ApplyNewSysMachineSpecific (success)
  2012-03-08 21:30:52, info MIG entering Callback_FirstBoot_Upgrade_Done
  2012-03-08 21:30:52, info [0x0806e5] MIG entering Callback_Rollback_PrepareForReboot
  2012-03-08 21:30:52, ToggleRollbackBootEntryAsDefault IBSLIB Info: [Setup] default boot entry has been properly set up
  2012-03-08 21:30:52, info [0x0806e6] MIG leaving Callback_Rollback_PrepareForReboot (success)
  2012-03-08 21:30:52, info [0x0900c6] PANTHR SEQ EVENT_SERIALIZE received
  2012-03-08 21:30:52, info [0x0900b7] PANTHR SerializeToFile: C:\Windows\Panther\MainQueueOnline2.que
  2012-03-08 21:30:52, info [0x0900b8] PANTHR backup main event queue
  2012-03-08 21:30:52, info [0x0900b9] PANTHR Saving queue permanently
  2012-03-08 21:30:52, info [0x0900c5] PANTHR serialization queue succeeded
  2012-03-08 21:30:52, UI CallbackShowFinishOnline info: enter
  2012-03-08 21:30:53, CallbackShowFinishOnline UI Info: output
  2012-03-08 21:30:53, info [0 x 090095] PANTHR called WdsExitImmediate!  The execution stops and the queue will not be saved.
  2012-03-08 21:30:53, CallBack_RestartSetup IBS Info [0 x 060357]: all restart settings have been correctly set up.
  2012-03-08 21:30:53, info MIG leaving Callback_FirstBoot_Upgrade_Done (success)
  2012-03-08 21:30:53, info [0x09008c] PANTHR SeqExecute - stop, since WdsExitImmediate() has been called
  2012-03-08 21:30:53, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2012-03-08 21:30:53, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2012-03-08 21:30:53, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2012-03-08 21:30:53, PANTHR DeleteCriticalSection info to pExecQueue-> csLock;
  2012-03-08 21:30:53, info [0x0500bd] of THE Module_Term_DU called
  2012-03-08 21:30:53, info [0 x 050081] of THE WaitAndCleanUp of THE...
  2012-03-08 21:30:53, info [0x0500a1] OF THE fact with THE... DUMgr cleaning
  2012-03-08 21:30:53, info [0 x 050082] with WaitAndCleanUp BECAUSE of THE...
  2012-03-08 21:30:53, info UI CallbackWin32UITerminate: removed WizardUI
  2012-03-08 21:30:53, info [0x0605a6] IBS requested UI to hide pages selection of language and regional settings.
  2012-03-08 21:30:53, Module_Term_Productkey IBS Info [0x06010d]: the valid product key in the table, see the property hide the value.
  2012-03-08 21:30:53, info [0 x 090081] PANTHR destroying any source not cited modules! (SEQ6)
  2012-03-08 21:30:53, info [0x0601d8] IBS InstallWindows: machine to restart.
  2012-03-08 21:30:53, info [0x0601e0] IBS install: reboot machine during the first phase of startup.
  2012-03-08 21:30:53, info [0 x 090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.