Similar Questions

• set up a home network with the PC using xp vista and windows 7

  I need to know how confugure my desktop vista and xp desktop and cell phone with my computer laptop windows 7.  detailed with inustrictions or links please.

  Hello

  You plug the computer via the network to a router or a switch card, and configuring their file sharing.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Anyone had any problems using Photoshop CC 2014 or 2015 CC Photoshop with the new OS El Capitan?

  I have not upgraded to OS El Capitan again because I wanted to wait to see if there are problems or conflicts between El Capitan and CC CC 2015 2014/Photoshop Photoshop. Anyone had problems?

  Thank you.

  Hi AgentJ9,

  Now there is a known issue for Scrubby zoom with El Capitan.

  Please see the following article: https://helpx.adobe.com/photoshop/kb/photoshop-and-el-capitan-mac-os-10-11.html

  Kind regards

  Tanuj

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• My lightroom is having problems to import images, I tried a different card with the same results readers

  My lightroom/mac is having problems to import images, I tried a different card with the same results readers

  This means that ccouldn can't ccopy Lightroom photos in the destination directory. You must determine which directory is specified in the Lightroom Import dialog box, it is on the right in the Destination. Then, you will need to enter your operating system and change the permissions on this specific issue to the WRITE permission.

• Can I use 63-bit Win 7 Home base with the same product key that I used for 32 - bit?

  1 I have win7 64 bit with licesence version hombasic. And now I use homebasic 32bits and 64bits format and install with the same key... So I jst want to know that this process can damage my computer laptop operating system? or there is no problem whatever I did!.

  Original title: Win7

  Well, it will damage her, just that you will not run the 64-bit version, which means, if you have more than 4 GB of RAM installed, Windows 7 Home Basic 32 bit will not support it.

  You should also check that the manufacturer of your computer is using 32-bit drivers for your computer.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• (I am in China and on the front is partly in Chinese.) I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears.

  Dear Firefox support, I am in China, and the first page of my Firefox screen is partly in Chinese. I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears. I downloaded a new version 5, but the mandarin (and the associated statement bar) still come in Mandarin. How can I download a really English version?

  You can choose your language installation of this list: http://www.mozilla.com/firefox/all.html

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• We want to use WinRM to our company to increase efficiency with the written scripts b admins.

  Hello

  We want to use WinRM to our company to increase efficiency with the written scripts b admins.

  But to avoid savage execution of multiple scripts, our security departments require 2 requirements:

  The fitting should be accepted only one server and only when encrypted (so be need a filter on the customers for this)

  And each running script must be connected

  So far I could not find a method to get this time. So, is there a way to do this?

  Best regards

  Original title: WinRM security

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• can I use photoshop on a pc and a mac with the same license?

  can I use photoshop on a pc and a mac with the same license?

  Yes, just install the application of cc, https://creative.adobe.com/products/creative-cloud on each computer desktop and use it to install your programs cc.

• Having a problem using the request of Sirius/XM.

  Hello world. I recently downloaded the Sirius/XM app on my phone, because it allows me to listen to and still take calls throughout my non bluetooth car system, using the input of the car radio. I have the phone cradle-mounted car of Motorola. All my other radio apps will turn horizontal / landscape with the phone, but the Sirius app does not work. It can be quite dangerous trying to find stations or songs while driving when you arm yer head sideways to read the list on the screen. Today, ' I can't ' get smoked a number with Willie more "came and I was trying to see who did the song. I almost lost control of my car!  Anyone know if this is a problem of motorcycle or Sirius? I also emailed Sirius/XM about it. Anyone else having the same problem? Thanks, Matt

  If other applications are running, I believe it's the app that was not intended to turn. curious to see if they meet you?

• I'm having a problem sharing back and forth between xp and vista & get the error that I don't have permission to access files

  original title: sharing of Vista with XP

  I'm having a problem of sharing back and forth between xp and vista.  I've set up the sharing, but I still get the error message that I don't have permission to access files

  Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.

• Problems using collection ArrayCollection as a DataProvider for trees and the menu bar, possibly bug?

  Hi guys,.

  I'm having some troble using a collection ArrayCollection as a DataProvider for a tree and a menu bar...

  I read some Adobe documents on this subject, and I read that two components read the dataProvider in the same way.

  but my current works of DataProvider well on the tree, but not on the MenuBar component...

  My dataProvider is an ArrayCollection collection of a custom class (which extends from ArrayCollection collection), and among its assets is a children's collection: ArrayCollection, so the hierarchy can be read correctly.

  When I use the component of the tree it works, but the menu bar do not display the branches...

  Can someone help me?

  Here's the function that create my dataprovider:

  
  private function fnFillDP (): void {}
  for (var i: int = 0; admResult.length > i; i ++) {}
  If (.nivel JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]) == 0) {}
  var novoMenu:CL_ArrayMenu = new CL_ArrayMenu();
  novoMenu.idMenu = .idMenu JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenu.titulo = .titulo JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenu.parent = .parent JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenu.nivel = .nivel JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenu.ordem = .ordem JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  
  dataProvider.addItem (novoMenu);
  } ElseIf (.nivel JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]) == 1) {}
  for (var j: int = 0; dataProvider.length > j; j ++) {}
  {If (CL_ArrayMenu(dataProvider[j]).idMenu == {JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]) .parent})}
  var novoMenuChildren:CL_ArrayMenu = new CL_ArrayMenu();
  novoMenuChildren.idMenu = .idMenu JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenuChildren.titulo = .titulo JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenuChildren.parent = .parent JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenuChildren.nivel = .nivel JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  novoMenuChildren.ordem = .ordem JV_MenuAdm (JV_AuxMenuAdm(admResult[i]).menuAdm [0]);
  If (dp.length > 0) {}
  If (CL_ArrayMenu (dp.getItemAt (0)) .parent == novoMenuChildren.parent) {}
  dp.addItem (novoMenuChildren);
  } else {}
  DP = new ArrayCollection();
  dp.addItem (novoMenuChildren);
  }
  } else {}
  dp.addItem (novoMenuChildren);
  }
  
  CL_ArrayMenu (DataProvider [j]). Children = dp;
  break;
  }
  }
  }
  }
  tree.dataProvider = dataProvider;
  menu.dataProvider = dataProvider;
  }

  Sorry for the bad English...

  Hello

  You can try using xml as the dataprovider of the Menu bar instead of going for the Arraycollection collection.

  Thank you

  Roman

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards