Having problem to communicate with the Dns server.

Similar Questions

• does anyone know what causes this sudden failure to communicate with the DNS server?

  My laptop suddenly stopped being able to connect to the internet. It has full signal and the modem works on a laptop another family (where I send you this). The error message "windows cannot communicate with the device or resource (primary DNS server), I followed the advice without success to date. What could cause do this all of a sudden?

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of the problems of connections for all McAfee users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• Windows cannot communicate with primary dns server

  Hey everybody.  I have a home network, wired PC, 1 wifi 1.  WiFi works fine.  wired network printers work well, other computers (laptops work fine both wired and wireless.)  I have a PC (VISTA), which now gives me the "windows cannot communicate with primary dns server.  This has happened a couple of times, but a reboot fixed things.  Once I had to change primary dns server from automatic to 208.67.222.222 (who got to this site), it worked.  Now, the same error, but nothing works.  I have tried in both directions between the DNS auto numbers listed here, also, have tried the following:

  ipconfig/flushdns
  ipconfig/registerdns
  netsh interface ip reset reset.log
  netsh int ip reset resetlog.txt

  and had windows try to reset the DNS of countless times.  Nothing works.  The upgrade to W7 eventually will correct this problem?  Another question, my wife insists on the use of AOL software (I know, I know), even if all that she uses to is by e-mail.  She says she loves interface.  A chance that caused this problem?

  Hello

  1. have there been recent changes to the system before the show?

  2. the problem occurs only with specific applications?

  Method 1:

  Follow the link and follow the steps proposed by Shekhar S and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  Method 2:

  Follow the link below and follow the steps. Check if it helps.

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  I also suggest you to run the command in the command prompt and check where the Windows Vista computer is pointing to DNS and DHCP.

  ipconfig/all

  Post back with the results in this thread.

  Let us know if it helps.

• When you use network troubleshooting in Windows, get message Windows cannot communicate with primary dns server

  Original Title2: Windows 7 - Internet
   
   
  Original title: can someone help me?
  I use a PC at home with Windows 7.  Whenever the failure at home, I have problems connecting to the Internet. Whenever I try to go on Youtube or another website, I get "Internet Explorer can not display the webpage." Now, my internet and router are configured correctly, then why is what is happening? I ran Diagnostics and got the "Windows cannot communicate with primary DNS server." I tried to reset the TCP/IP settings. It did not work and I did three times! I tried to check the properties of my network when I went to diagnose the problem, he threw some stuff on the property sheets open and close before you reopen the properties. If someone could give a foolproof solution for this annoying internet problem I would really appreciate it. Thank you.

  Hello

  Welcome to the Microsoft community!

  While using the network troubleshooter utility in Windows, you get message that Windows cannot communicate with primary DNS server.

  What is the exact message that you get when you try to check the settings of network domestic?

  I suggest you to change network settings:

  Step 1: change network settings of the router

  a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  b. make sure you are in Setup-> basic configuration category.
  c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)
  e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  f. scroll down and click 'Save Settings'.

  Note: The procedure may slightly vary with different routers. You can see the manual or contact ISP for assistance.

  Step 2: change in the computer network settings

  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• Unable to connect with the DNS server

  Recently, I went away for the weekend and came back to find that I had no internet, on all devices... So I don't know exactly how long he was out. I'm a computer and a network engineering student and I've tried everything I can think of to make it work again. Here's what I did:

  First off troubleshooting generates an error message: "failed to connect to the DNS server.

  Of course, I did reboot of the habit of my router and my devices.

  I can't connect to WiFi or direct connection via Ethernet. I tried flushing DNS via the command-line ("ipconfig/flushdns") as well as the command "netsh int ip reset", "ipconfig/release" and "ipconfig / renew." I tried to go into the settings of the network adapter and the two affecting the IPv4 and IPv6 DNS google DNS settings. I even traded my router for a new with my ISP (of Roger (Canada)). I have connected to my router through my web browser and tried to change some of the DNS settings there (everything went well). Nothing worked so I have everything set to default. I tried ping around my own network, I ping my own card NETWORK, but also the entry door, so I know that's not my PC, I have also excluded because all my devices do not work. I spoke with Rogers (my ISP) twice now and they were no help at all, they were more concerned by the flashing lights on the router as the real problem. I'll have a technician to the course to watch tomorrow, but I doubt they'll be any help at all. I wouldn't say I'm a computer genius, but I have a pretty good understanding of how things work and I can not understand what the problem is here, I can have forgotten something or forgot to mention something I tried. But if anyone has any ideas, or similar cases they decided that I would be VERY grateful for the help.

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  There could be various reasons for which you will not be able to connect to the Internet. And I'm glad to know you have try more troubleshooting steps to solve problems.

  1. which antivirus program is installed on your computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link and see if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the update after trying the steps above.

• I have a yellow exclamation mark on my wireless and signal when I diagnose the problem that Windows says 'the DNS server does not. Can anyone help?

  I have our computer server set to a static ip address, because our printers work on the network. Every time I try to connect to the internet Windows tells me "the DNS server is not responding. Can someone help me?

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• Problem with the DNS server

  In our field, we want to use the Standalone DNS (domain with ads & DHCP server) for a task. We cannot have IP - name resolution. Why & what could be the solution? (we tried to create the area of reverse lookup PTR record int, but did not)

  Hi Muhammad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Cannot communicate with primary DNS server

  Here are the results of my ipconfig/all... I had to type this, since I can't access the Internet on my computer...

  Windows IP configuration

  Name of the host... Jeremiah-PC

  Primary Dns suffix...

  Node type... Broadcast

  The active IP routing... NO.

  Active proxy WINS... NO.

  Search list of DNS suffixes... mshome .net

  Wireless network connection Wireless LAN adapter:

  Suffix the connection-specific DNS: wi.rr.com

  Description: Broadcom 4321AG 802.11a/b/g/draft-n Wi - Fi adapter

  Physical address: 00-21-00-35-87-9D

  DHCP enabled: Yes

  Autoconfiguration enabled: Yes

  Link-local IPv6 address: fe80::h496:a7ac:7393:6101% 11 (Preferred)

  IPv4 address: 192.168.0.100 (Preferred)

  Subnet mask: 255.255.255.0

  Lease obtained: Wednesday, June 30, 2010 11:18:20

  End of the lease: Wednesday, June 30, 2010 14:21:35

  Default gateway: 192.168.0.1

  DHCP server: 192.168.0.1

  DHCPv6 IOOKING: 184557824

  DHCPv6: 00-01-00-01-0F-F7-B2-51-00-1E-68-95-9F-3B

  DNS servers: fe80::8cdd:413f:4008:98 c 5% 11

  192.168.0.1

  NetBIOS over TCP/IP: enabled

  Search list suffix the connection-specific DNS: mshome.net

  Ethernet connection to the Local network card:

  State of the media: Media disconnected

  The connection-specific DNS suffix:

  Description: Realtek RTL8168C (P) / 8111C (P) family PCI-ELISE NIC

  Physical address: 00-1E-68-95-9F-3B

  DHCP enabled: Yes

  Autoconfiguration enabled: Yes

  Card tunnel Local Area Connection * 6:

  State of the media: Media disconnected

  The connection-specific DNS suffix:

  Description: isatap. {363BDFFE-FD5C-4926-B273-605FF6EFEE705}

  Physical address: 00-00-00-00-00-00-00-e0

  DHCP enabled: no

  Autoconfiguration enabled: Yes

  Card tunnel Local Area Connection * 7:

  State of the media: Media disconnected

  Suffix the connection-specific DNS: wi.rr.com

  Description: Microsoft ISATAP #2 adapter

  Physical address: 00-00-00-00-00-00-00-E0

  DHCP enabled: no

  Autoconfiguration enabled: Yes

  Card tunnel Local Area Connection * 11:

  State of the media: Media disconnected

  The connection-specific DNS suffix:

  Description: Teredo Tunneling Pseudo-Interface

  Physical address: 02-00-54-55-4e-01

  DHCP enabled: no

  Autoconfiguration enabled: Yes

  You cannot communicate because you do not have a recognized or primary DNS server configuration.  The configuration of the DNS service is incorrect.  It seems that your DNS server is configured to be your router - but it's hard to say.  You actually don't have even one of those enrolled in the internet connection (if it is not to be found in mshone.net).  I don't know what it should be - that depends on your ISP.  Contact your ISP technical support group and help you set up your system correctly - more precisely settings DNS, but the rest as well as you have on the line and do not let up until you made a good connection.

  I'm sorry, we can not help more, but we need their configuration data to set it up properly.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cannot communicate with the server DNS (66.81.1.251)

  I have a supplier of the Internet service provider and usually use ie9, but for a month or two, I'm using Google Chrome and, until very recently, I was not having problems. For a week now, I've been kicked almost like clockwork, and when I diagnosed my connection, I got the message "unable to communicate with the DNS server (66.81.1.251). I really prefer Chrome on IE9 because it's faster (I use dial-up). I would like to know what has caused this happens suddenly and want step by step instructions to resolve this problem. Windows help did not help.

  Hello desandjol,

  Most likely your ISP DNS servers may have changed.

  Look at the thread below for help troubleshooting:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-communicate-with-primary-DNS-server/9043f785-2f4e-4CC1-ADF5-6ba5ca413749

  Let us know if that helps.

• Errors when trying to communicate with the server administrator

  I'm deploying fusion web app to the stand-alone weblogic server (Version is 10.3 and its hosting OBIEE), but JDeveloper (Studio Edition Version 12.2.1.0.0) reports the error below.

  [01: 27:03] - incomplete deployment.

  [01: 27:03] [SPI: 260111 deployment J2EE] errors were detected while trying to communicate with the management server.

  [01: 27:03] the requested attribute is not exposed via JMX: isDynamicallyCreated: com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  [01: 27:03] com.bea:Name = AdminServer, Type = Server: DynamicallyCreated

  However, the application server is successfully passed all the tests, the result below.

  JSR-160 LENGTH tests... success

  Tests of JSR-160 DomainRuntime... success

  JSR - 88 tests... success

  JSR-88-LOCAL tests... success

  Test server MBeans model... success

  ... Controller App tests success

  Tests of JSR-88-DEP-MGR... success

  JSR-88-DEP-MGR-LOCAL tests... success

  Tests of JNDI... success

  JSR-160 tests edit... success

  Tests of HTTP... success

  11 of 11 successful tests.

  I am able to successfully connect and deploy applications on the same JDeveloper weblogic - version 11.1.1.7, but I am facing issue with JDeveloper - version 12.2.1.0.0.

  Any help is very appreciated.

  
  

  Thank you

  Vishwa

  Hi Vishwa, there.

  using JDev 12.2.1 to create fusion web applications means that you use ADF

  12.2.1 and you try to deploy this app on WLS 10.3 which

  knows nothing about ADF 12.2.1. This means that you must

  install and configure the ADF 12.2.1 libraries running on your application

  Server prior to deployment.

  Before that review certification ADF matrix to determine the

  version minimum 10.3 where you can run ADF 12.2.1-

  http://www.Oracle.com/technetwork/developer-tools/jdev/documentation/122-CERT-2708091.html#ApplicationServers

  However, you should check if installation 12.2.1 ADF will not

  installation of OBIEE break.

  Before you dig in fact ADF 12.2.1 installation can you pack

  your application developed in JDev 12.2.1 and deploy from the admin

  Console?

  HTH,

  A.

• The DNS server does not respond?

  Often my internet connection fails completely. It connects to any kind of Web site when it arrives. I use the option to "solve problems", and discovered that the DNS server is not responding. So he says. It happens all the time and I can't fix it myself. Can I get some advice? Maybe even a complete solution?

  Hi Jim,.

  Did you of recent changes to the computer?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Please refer to suggestions of Vinod gwenaëlle replied on 10 March 2012

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/the-DNS-server-ISN

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-CA/Windows/cant-connect-Internet#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• I updated my computer to windows 7 and now I'm having problems with my dns, I can't always on; the line. tells me having a problem with my dns server

  updated my computer to windows 7 and now can not conect with the dns can not get online always

  Upgrade to Win7 has nothing to do with Windows Update.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet or post in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft