The DNS server does not respond?

Similar Questions

• The DNS server does not respond when try connect a Web site

  original title: dns server problem

  m using computer dell laptop with windows xp.i usually to plug my my cell phone and use vodaphone since 2 days internet.since I m unable to access all sites Web on laptop.m get a msg105 error (dns server does not)... so I downloaded the public dns server on cell n transferred on laptop and changed my dns to google dns server server... It worked fine for one day and the next day I had the same problem of server dns - no responding.so I repeated al procedure again and then it started workin again... What is the problem with my dns server... do I have to download na dinstall public dns server every time I use my laptop via the cell phone internet. ?... Help, please...

  Thank you

  It should work with the server DNS of Vodaphone.  Set the laptop to get its IP & DNS addresses automatically, then make sure that the DHCP Client service is set to automatic startup.

  John

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• The DNS server is not responding.

  Just bought this WRT160N a few days ago, I implemented and no problems now, randomly, I can't the internet to work, every once in awhile, he will work for a few minutes, then it will return new.  When I troubleshoot Windows, I have "the DNS server is not responding" * detected * this computer is located on a wired connection to my router, and is currently the only computer connected to my router.  The connection works fine when I run the cable directly from my modem to the computer (which im doing now) any help would be greatly appreciated!

  To upgrade the firmware of your router, you don't need to be connected to Internet... Just connect the Modem to the computer and download the firmware on your router... Once you have downloaded the firmware on your router... Connect the Modem to the router on the Internet Port and connect the computer to the router Linksys on Port n ° 1... Follow the instructions I mentioned in my previous post, how to upgrade the firmware on your router... Once the firmware is upgraded successfully... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• Unable to connect to the internet, the dns server is not responding

  Hello

  It is the second system I've seen in the last two weeks with this question, I reloaded the OS on the first.  The system is Windows Vista Ultimate x 64.

  That is the problem.  Open Internet Explorer 9 on a Windows 7 PC, you get the message:

  Internet Explorer cannot display this webpage

  Click on diagnose connection problems, you get the following:

  The DNS server is not responding

  Look at a detailed information your told to contact your network administrator (this is me - no other XP or Windows 7 PC on the network has a connection problem).

  Below that is the message:

  Your computer is trying to use a DNS server that is incorrect or does not exist.

  Note that this is a laptop that has started on another network with the same problem.  I took it to my office to solve problems.  My DNS server is a WIndows SBS 2003 server.

  Below that is a log file of etl you cannot open (Notepad considers undesirable, much of the use that is).

  The steps I did to try to resolve the problem.

  Virus system scan

  There is no hosts file, I've recreated which.

  The static value IP and DNS.

  I can ping the DNS server by its IP address, but not by name.

  I put the DNS address to 208.67.222.222

  Restored network drivers

  Reininstalled all network drivers

  Disable Microsoft Virtual WiFi adapter

  Any suggestions would be helpful.

  the

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to reset the DNS cache by using the following steps and check it, if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER: ipconfig/flushdns

  c. you will see the following confirmation:

  Windows IP configuration

  With success, emptied the Cache of DNS resolution.

  Method 2:

  Try the following steps to release and renew the IP address and check if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER:
  - enough ipconfig at the command prompt and of the press ENTER
  - ipconfig / renew in the command prompt and press ENTER

  c. check if the problem is resolved.

  Hope the information is useful.

• The DNS server does not - wired - wireless is OK

  Hi all

  This problem has left speechless several other computer scientists, I thought I'd try this forum before making a complete reinstallation.  Here's a challenge to test your intelligence.

  Here's the situation:

  Dell laptop (11 months - still under warranty) with Wi - Fi and ability.  Originally supplied with Vista, but I installed Win7 in November.  I tried to do the clean installation method, but do not know if I managed to 'clean' approach because I thought that my data may be wiped.  He was not, he is still on the machine.  But W7 seems to work very well, I added Slowey some software.  I think I was able to communicate with a wired connection before on the machine, but now I can't be sure.  The machine communicates wireless without problem.  IE8 opens fine.  If I connect the wire and cut the antenna or boot to the wire with antenna, the machine starts and works well, but does not connect using IE8.  I get a message "the DNS server is not responding.

  The machine can ping and ping just fine on the wire.  A chat session with Dell yesterday (Citrix I think) succeeded in transferring to wire wireless when I turned off the antenna.  In addition, the MS patch notification came through this morning, but I can't download the patches on the wire.

  Here is what has been tried so far:

  1. Changed cables and ports in the router to check the status of these question: these are OK.
  2. PC directly connected to the router: same problem.
  3. Verified services running (Control Panel-Admin tools-Online Services online):
     System event COM + (for WZC issues)
     Computer browser
     DHCP client
     DNS client
     Network connections
     Network location awareness
     Remote procedure call (RPC)
     Server
     TCP/IP Netbios support
     Automatic configuration wireless (only XP wireless configurations)
     Autoconfiguration WLAN (wireless Vista only configurations) service
     Workstation
  4. Verified IPv4 is defined in order to obtain the IP address automatically.
  5. Reset IE8.  No change.
  6. Turned off the Windows Firewall.
  7. Tried to access internet using Chrome.  No go.
  8. Wired NETWORK card uninstalled and reinstalled driver.  Downloaded last at Dell, they pushed also later.  No luck.
  9. Tried the Google Open DNS.  No difference.
  10. ipconfig/flushdns
  11. TCP/IP stack repair (run as Administrator: start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.)
      -Entries reset WINSOCK to default installation: netsh winsock reset catalog
      -Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
      -Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
      
  12. While in Safe Mode, disconnected wire: uninstalled the driver for the CARD.  Started full W7: installed the latest driver.
  13. In Safe Mode, the stack TCP/IP repair as described above.

  All to nothing does not.  IE does not connect to the internet.  Chrome is not connecting to the internet.

  You people have any ideas what the devil is wrong with this machine?  Can you offer any suggestions to try to get access wired for the functioning of the internet?

  Thanks in advance!

  Hello Stringout,

  I said to reset the router because the router is the DNS server and assigns the IP address to all devices on the network. Now, since you get the error "DNS server is not responding. It may possible that this router is not able to assign the correct ip address to all computers.

  You can also try to update the router with the latest firmware. Still, Microsoft!

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• I have a yellow exclamation mark on my wireless and signal when I diagnose the problem that Windows says 'the DNS server does not. Can anyone help?

  I have our computer server set to a static ip address, because our printers work on the network. Every time I try to connect to the internet Windows tells me "the DNS server is not responding. Can someone help me?

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• get the dns server does not, or not recognized

  I get the DNS message is not not responding or not recognized

  This started recently?  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• "The DNS server is not responding", but I had problems when I tried the fixed IP address. Help!

  Hello

  With some networks, all is well, connected and has internet access.  In other places, like where I am now, I can connect to a network, but I can't access the internet.  I tried the long fix recommended on the community of Miscrosoft, start by entering cmd at the beginning and then dealing with IP addresses, but I kept getting "Media disconnected" and where he would have had this connection to the Local network #, 0.0.0.0 or something else, I saw that anywhere.  He just said Local Area Connection * 12 because I remember and then was something like 00000000000000E at the bottom of the entry.  I also tried the method 2, use the control panel and the connection of LAN, but then 'properties' properties of it has not been highlighted, so I couldn't continue.  Windows 7 laptop.  Help!

  Thank you.

  Hello

  I think I have solved it!  I use your method 1 and took the link to Microsoft Support.  Then, I used their method 2 (TCP/IP configuration settings), without success.  But I just had an intuitive idea, so I tried again, but do not click on the Local network connection, I clicked on the network, I try to use, Fairpoint-etc, went in and saw that Internet Protocol Version 4 was not set to automatically obtain DNS server address.  So I chose that, hoping that I didn't just kill my computer and voila!  Internet access is here!  We'll see if it stays.

  Where it rises again if, because you asked, Yes, I am using a wireless connection and my anti-virus is Avira.  Out of curiosity, is this good antivirus, or is there something better that is also free?  Thank you very much
  Ursa

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot access the Wi - Fi connection with the error: "DNS server is not responding" on Windows 7

  So, recently, I installed a new router. After restarting my modem as indicated in after connecting the router to the modem, I was surprised to see that the wireless network has been renamed to (name) 2. I continued with the installation and soon found that it happened too much to the network from the router, and none of them does not seem to work. They tell me that the DNS server is not responding. for the last ive tried day every last problem I can be downloaded on the internet and nothing seems to work. pls help

  Original title: renamed networks and will not work

  Check if your modem has a built-in router.  If so, it should be disabled until your router works.  If this is a new router, contact the manufacturer of the router.  They will help you.

  It is not likely a problem on your computer.

• New domain today name ' hui - DNS server does not

  I'll put up a blog using WordPress software.  I recorded a doman name today and hired DreamHost to host the blog.  DreamHost successfully installed WordPress and sent me an email with a link to create an administrator. user.  When I click on the link, I get a message that the DNS server is not responding.  Verio, the company that has registered my domain name, also sent me an email with a link, I use to access my control panel.  I get the same message - DNS server does not respond.

  Because I only had access to the internet via a private with Rogers and used the e-mail account, I don't know I'm missing something simple... just do not know what.

  Please help beginners to blog!

  THX

  Ann

  Hello

  Like you are on a domain, your question would be better suited in the audience of IT professionals

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Thank you

• DNS server does not not on one website

  We have a web site that we cannot enter. The outside of our House, we from computers. It is said that the dns server is not responding. Any ideas?

  Sorry for the stupid question. I usually fix things myself so I'm not used to ask questions.

  Yes, I ran the store. The problems resulted in telling me that there is a problem with the dns server. Laughing out loud. I tried to open it in IE, Firefox, Google Chrome and Safari.

  I went to open dns... no prob now. Thanks for your time.

• DNS server does not not with new wireless router!

  I've just set up a new internet connection via a cisco wireless router turned my my ISP. Since then, I was not able to access the web pages. I am connected to the network, but continue to receive the message that the DNS server is not responding. Other laptops that use older versions of windows have no problems.

  I tried in many of the solutions provided on other posts, but nothing is done and have just restored my system to hopefully undo changes so that I can start again.

  Any advice would be greatly appreciated. Thank you

  Jenny

  Hi Jack

  I am well connected via UPC which was formerly NTL, and I watched Hostmaster Chello Broadband and it seems to be part of the UPC also. I don't know if I have a network manager.

  However, my problems seem to have been resolved, I deleted the files and programs that were downloaded from the internet, including protection against viruses and a program called utorrent and have replace my virus protection with microsoft security databases. Ran malware bytes, I know not if I have to run this next to most of the security.

  I hope that my problems have been fixed, but I'll be back if they occur again. Thanks for your time and your help.

  Jenny