Problem with the DNS server

Similar Questions

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Problem with the DNS in windows server 2008

  When I installed the dns server role and ADDS using dcpromo, I get the error message saying that the IP address is not valid even it's a static IP 192.168. *. *

  Hi Pradeep,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winservergen

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• I updated my computer to windows 7 and now I'm having problems with my dns, I can't always on; the line. tells me having a problem with my dns server

  updated my computer to windows 7 and now can not conect with the dns can not get online always

  Upgrade to Win7 has nothing to do with Windows Update.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet or post in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• does anyone know what causes this sudden failure to communicate with the DNS server?

  My laptop suddenly stopped being able to connect to the internet. It has full signal and the modem works on a laptop another family (where I send you this). The error message "windows cannot communicate with the device or resource (primary DNS server), I followed the advice without success to date. What could cause do this all of a sudden?

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of the problems of connections for all McAfee users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• Unable to connect with the DNS server

  Recently, I went away for the weekend and came back to find that I had no internet, on all devices... So I don't know exactly how long he was out. I'm a computer and a network engineering student and I've tried everything I can think of to make it work again. Here's what I did:

  First off troubleshooting generates an error message: "failed to connect to the DNS server.

  Of course, I did reboot of the habit of my router and my devices.

  I can't connect to WiFi or direct connection via Ethernet. I tried flushing DNS via the command-line ("ipconfig/flushdns") as well as the command "netsh int ip reset", "ipconfig/release" and "ipconfig / renew." I tried to go into the settings of the network adapter and the two affecting the IPv4 and IPv6 DNS google DNS settings. I even traded my router for a new with my ISP (of Roger (Canada)). I have connected to my router through my web browser and tried to change some of the DNS settings there (everything went well). Nothing worked so I have everything set to default. I tried ping around my own network, I ping my own card NETWORK, but also the entry door, so I know that's not my PC, I have also excluded because all my devices do not work. I spoke with Rogers (my ISP) twice now and they were no help at all, they were more concerned by the flashing lights on the router as the real problem. I'll have a technician to the course to watch tomorrow, but I doubt they'll be any help at all. I wouldn't say I'm a computer genius, but I have a pretty good understanding of how things work and I can not understand what the problem is here, I can have forgotten something or forgot to mention something I tried. But if anyone has any ideas, or similar cases they decided that I would be VERY grateful for the help.

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  There could be various reasons for which you will not be able to connect to the Internet. And I'm glad to know you have try more troubleshooting steps to solve problems.

  1. which antivirus program is installed on your computer?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link and see if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the update after trying the steps above.

• Im trying to download After effects, it fails each time and wrote a problem with the download server?

  Im trying to download the effects after trial, but each time it starts to download fails and told them something wrong with the download server?

  Hi d3signerg3y,

  What operating system are you using. You are on a managed network.

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html .

  Kind regards

  Romit Sinha

• Having problem to communicate with the Dns server.

  Hello everyone, I'm having problems with my connection when I click Connect to the network diagnose it shows me this error message.

  "cannot communicate with the server of DNS (218.186.1.58).

  I'm a fall of MMORPG and disconnect from the internet, when I was playing or surfing. Can someone help me solve this problem.

  Hello Spiffie,

  You can try to uninstall the Windows Update on March 11 to see if that solves the problem.

  Remember that uninstalling the updates may require restarting the computer to complete uninstallation of the update. You will be notified to restart if the update does.

  Please post to let me know if this helps J

• Problem with the DHCP server IP address

  Hello

  a new installation of LAN, two VSS pair core 6509, 15 closets, with piles of 3750. Floor 15 only, host devices can ping the DHCP server, but cannot acquire IP addresses. not this problem on other floors?

  PortFast a dother settings are intact.

  your thoughts with be appreciated.

  Massoud

  Are the trunks will switches closets for the vlan, the DHCP server is in?

  Sent by Cisco Support technique iPhone App

• Troubleshooting performance problems with the mail server on the virtual computer

  I have a virtual machine with a mail server installed on a windows OS. But all of a sudden, my clients on the server response times decreased significantly.

  This could be the cause of this problem?
  It could be to do with the network, storage, or resources, but I don't know what steps I could take to determine fault

  Would someone mind helping me with the steps I could take to solve this problem?

  Thank you

  The below document page 20 and 21 accurate meters, you should look at the virtual machine level.

  http://www.VMware.com/files/PDF/Exchange_2010_on_VMware_-_Best_Practices_Guide.PDF

  These counters can be used for any virtual computer not only Exchange.  If you are familiar with ESXTOPs I believe that the best way to deep dive in the diagnosis of performance problems.  Also here is a link for these parameters.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008205

  This link takes you to http://communities.vmware.com/docs/DOC-9279 which has the description on the stats.

• Problem with the connectivity Server MSSQL of ODI 10.1.3

  Hello
  
  In one of the interface we are filling for the target table in MSSQL Server 2005 version.
  The results of successful physical topology connection.
  
  For so long there is no problem and it runs successfully. But all of a sudden I am facing problems with this.
  
  I can't see data warehouses under the template created for this table. During the enlargement process of the model, during an attempt to overthrow the model or when I try to save the changes to the package, I get the error below.
  
  java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (unsupported major.minor version 49.0)
  
  at java.lang.ClassLoader.defineClass0 (Native Method)
  
  at java.lang.ClassLoader.defineClass (unknown Source)
  
  at java.security.SecureClassLoader.defineClass (unknown Source)
  
  at java.net.URLClassLoader.defineClass (unknown Source)
  
  in java.net.URLClassLoader.access$ 100 (unknown Source)
  
  java.net.URLClassLoader to $1.run (unknown Source)
  
  at java.security.AccessController.doPrivileged (Native Method)
  
  at java.net.URLClassLoader.findClass (unknown Source)
  
  at java.lang.ClassLoader.loadClass (unknown Source)
  
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)
  
  at java.lang.ClassLoader.loadClass (unknown Source)
  
  at java.lang.ClassLoader.loadClassInternal (unknown Source)
  
  at java.lang.Class.forName0 (Native Method)
  
  at java.lang.Class.forName (unknown Source)
  
  at com.sunopsis.sql.SnpsConnection.a (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.u (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.connect (SnpsConnection.java)
  
  at com.sunopsis.dwg.reverse.Reverse.a (Reverse.java)
  
  at com.sunopsis.graphical.component.b.a.g.a (g.java)
  
  at com.sunopsis.graphical.component.b.a.g.a (g.java)
  
  at com.sunopsis.graphical.component.b.a.d.a (d.java)
  
  at com.sunopsis.graphical.component.b.h.e (h.java)
  
  at com.sunopsis.graphical.component.b.h.b (h.java)
  
  at com.sunopsis.graphical.component.b.h.b (h.java)
  
  at com.sunopsis.graphical.component.b.h.b (h.java)
  
  at com.sunopsis.graphical.component.b.h.a (h.java)
  
  at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame (SnpsSplitFrame.java)
  
  at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode (SnpsSplitFrame.java)
  
  at com.sunopsis.graphical.frame.bp.bN (bp.java)
  
  at com.sunopsis.graphical.frame.bp.bL (bp.java)
  
  at com.sunopsis.graphical.frame.a.is.bH (is.java)
  
  at com.sunopsis.graphical.frame.bo.r (bo.java)
  
  at com.sunopsis.graphical.frame.bo.bv (bo.java)
  
  at com.sunopsis.graphical.frame.bo.z (bo.java)
  
  at com.sunopsis.graphical.frame.bo.b (bo.java)
  
  at com.sunopsis.graphical.frame.w.actionPerformed (w.java)
  
  at javax.swing.AbstractButton.fireActionPerformed (unknown Source)
  
  in javax.swing.AbstractButton$ ForwardActionEvents.actionPerformed (unknown Source)
  
  at javax.swing.DefaultButtonModel.fireActionPerformed (unknown Source)
  
  at javax.swing.DefaultButtonModel.setPressed (unknown Source)
  
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (unknown Source)
  
  at java.awt.Component.processMouseEvent (unknown Source)
  
  at java.awt.Component.processEvent (unknown Source)
  
  at java.awt.Container.processEvent (unknown Source)
  
  at java.awt.Component.dispatchEventImpl (unknown Source)
  
  at java.awt.Container.dispatchEventImpl (unknown Source)
  
  at java.awt.Component.dispatchEvent (unknown Source)
  
  at java.awt.LightweightDispatcher.retargetMouseEvent (unknown Source)
  
  at java.awt.LightweightDispatcher.processMouseEvent (unknown Source)
  
  at java.awt.LightweightDispatcher.dispatchEvent (unknown Source)
  
  at java.awt.Container.dispatchEventImpl (unknown Source)
  
  at java.awt.Window.dispatchEventImpl (unknown Source)
  
  at java.awt.Component.dispatchEvent (unknown Source)
  
  at java.awt.EventQueue.dispatchEvent (unknown Source)
  
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy (unknown Source)
  
  at java.awt.EventDispatchThread.pumpEventsForHierarchy (unknown Source)
  
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  
  at java.awt.EventDispatchThread.run (unknown Source)
  
  
  I checked below:
  
  Is the SQL server version: MSSQL 2005 Server
  the "sqljdbc.jar" file is there in place "< ORACLE_HOME >/oracledi/drivers".
  Java version: jdk1.5.0
  
  
  There is no change in the source or target db. Please help me solve this problem

  In my view, there more to see the java version compatibility.

  Please visit this link - http://techtracer.com/2007/10/10/resolving-the-unsupported-majorminor-version-490-error/

• PIX 501 problems with the web server internal.

  I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate.

  Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security.

  Then I would like my setup now get help and also how to do when using other ports and SSL later.

  Thanks Thomas!

  6.3 (1) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  alfta hostname

  domain ciscopix.com

  names of

  name 192.168.1.16 TerminalPC

  name 192.168.3.0 Lager

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager

  permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager

  outside_cryptomap_60 ip access list allow

  192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  outside_access_in tcp allowed access list all eq www

  host 62.108.197.90 eq www

  IP outdoor 62.108.197.90 255.255.255.192

  IP address inside 192.168.1.254 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 62.108.197.10 255.255.255.255 outside

  location of PDM 62.108.197.11 255.255.255.255 outside

  location of PDM 192.168.1.0 255.255.255.255 inside

  location of PDM TerminalPC 255.255.255.255 inside

  location of PDM 192.168.2.0 255.255.255.0 outside

  location of PDM Lager 255.255.255.0 outside

  location of PDM 192.168.2.0 255.255.255.0 inside

  location of PDM 62.108.197.137 255.255.255.255 outside

  location of PDM 62.108.197.137 255.255.255.255 inside

  location of PDM 195.67.210.72 255.255.255.255 outside

  location of PDM 62.108.197.90 255.255.255.255 inside

  PDM logging 100 information

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1

  Enable http server

  http 62.108.197.10 255.255.255.255 outside

  http 62.108.197.11 255.255.255.255 outside

  http 195.67.210.72 255.255.255.255 outside

  http 192.168.1.0 255.255.255.0 inside

  http 62.108.197.137 255.255.255.255 inside

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp strong - esp-sha-hmac

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  peer set card crypto outside_map 20 195.198.46.88

  outside_map card crypto 20 the transform-set ESP-DES-MD5 value

  outside_map 40 ipsec-isakmp crypto map

  card crypto outside_map 40 correspondence address outside_cryptomap_40

  peer set card crypto outside_map 40 62.108.197.137

  outside_map card crypto 40 the transform-set ESP-DES-MD5 value

  outside_map 60 ipsec-isakmp crypto map

  card crypto outside_map 60 match address outside_cryptomap_60

  peer set card crypto outside_map 60 195.198.46.88

  card crypto outside_map 60 the transform-set ESP-DES-MD5 value

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 62.108.197.137 netmask 255.255.255.255

  ISAKMP key * address 195.198.46.88 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 sha hash

  10 1 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet 192.168.1.0 255.255.255.255 inside

  Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www

  And a new application:

  outside_access_in list access permit tcp any host 62.108.197.90 eq www

  Access-group outside_access_in in interface outside

  * You have the group-access above on your original configuration message, BUT not on the above post.

  Don't forget to issue clear xlate after the change and also record with write mem.

  Try to do this in the pix CLI instead of using PDM.

  Hope this helps and let me know how you go.

  Jay

• Problem with the path_translated server variable &amp; amp; CFMX7

  I think that something may be wrong with ColdFusion. I have a test site (specially created to test this issue) running on IIS 6, which has just a plain old index.cfm index.html. When I navigate to index.cfm/someotherdirectory/non-existantdirectory/whatever/index.cfm, it evokes the index.cfm basis.
  
  When I try to do the same thing with the html file, it gives me a 404 error. How can I force ColdFusion to give a 404 in this circumstance?

  Fireye-wrote:
  > I think that something may be wrong with ColdFusion. I have a test site
  > (specially created to test this issue) running on IIS 6, which has just a
  > plain old index.cfm and index.html. When I navigate to
  > index.cfm/someotherdirectory/non-existantdirectory/whatever/index.cfm, it
  > shows the base index.cfm.
  >
  > When I try to do the same thing with the html file, it gives me a 404 error.
  > How can I force ColdFusion to give a 404 in this circumstance?

  Make sure you that you enabled "check that file exists" in the IIS mapping.
  If that doesn't cut, find the web.xml file and comment out the research
  Security engine section (ITS).

  Jochem

  --
  Jochem van Dieten
  Adobe Community Expert for ColdFusion