Having trouble getting internet access
Hi guys... I have a dell laptop inspiron 5520... It's just 5 days... everything was fine with the internet is suddenly started showing no internet access to my wifi network... but it has network access... itsays that the modem is connected but no internet access...
Gys help me... i have tried all my knowledge on the networks to clear it but every thing in vain... I sure u there is no problem with my modem...
I use McAfree antivirus protection
It is not your computer that's recently published Microsoft updates. Mine did the same thing. I had to restore to a previous point and everything works as before. I can't believe that Microsoft is actually telling people it's a problem with their computers when obviously this post proves how FALSE it is. Your computer is practically new!
They will have to OWN up to their mistake and release a patch.
Tags: Windows
Similar Questions
-
Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless
Bluetooth
Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.
Can not find the necessary drivers
Hello
1 have you tried matching the laptop and the wireless audio link?
2. What is the number of the model of the laptop?
Method 1:
Follow the link below and check if that helps.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Follow the link below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)
I also suggest you to contact the manufacturer to get the required drivers for the device and install it.
http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html
http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3
Automatically get recommended drivers and updates for your hardware
I hope this helps!
-
Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA
Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA
Original title: motorola razomax hd
Hi Bill,
You can read these articles and check if that helps.
How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D
Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device
Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player
For more help.
https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US
Additional information.
Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions
Response with the State of the question and we will be happy to offer you our help.
-
Have a new Mac computer. Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.
How can I get Creative Cloud works on 2nd new computer please?
Hello
Please use the link below to completely remove the creative Cloud Desktop Application.
Using creative cloud | Uninstall the creative cloud desktop application
Hope this will help you.
Kind regards
Hervé Khare
-
Using a Repeater wifi with the WRT54G2-cannot get internet access
With a WRT54G2 wireless router I added a WIFI Repeater. A range extender WIFI Netgear wn2000RPT is used as a Repeater. I installed the range extender and I get a good connection with the rehearsal and I can connect from my PC to this relay, but when I do I can't get internet connection. I see this result with my XP system and a Windows 7 system.
For the new connection on the network repeated, I entered the newly created security key.
Configurations of Repeater of most of the brands includes patented technologies that makes it incompatible with other brands. You can only use Linksys routers with repeaters or Linksys wireless access points.
-
why I don't get internet access? Help, please!
Why when I connect to my wifi, I'm permitted little or no internet access, but it still shows me trhat I'm connected?
Hi Chris Naylor,.
1 Windows operating system you are using?
2. have you been able to connect to before without any problem?
3. did you of recent changes on the system?
Method 1:
You can read the following article and try to run the troubleshooter and check.
In the Windows wireless network connection problems
Method 2:
You can try to update the wireless adapter and see if it helps.
Updated a hardware driver that is not working properly
Method 3:
Disable IPv6
Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
NOTE: You should do this for each network connection.Method 4:
You can also temporarily disable third-party security software and firewalls installed on the system and check if the problem persists.
Note: Be sure to enable the security software on the computer after checking.
For more information, you can consult the following article:
Solve problems, find wireless networks
Hope this information is useful.
-
Hi, I have trouble getting the installer of Creative Cloud 30 day trial to boot on my computer. Here I did successfully about 3 days ago, but since then has picked up a virus. I used system restore to restore my computer about 5 days, which was to remove the creative cloud and Photoshop. Now I am trying to re - download creative cloud with no luck. Any idea would be highly desirable. -Demian Arend
Hello
Sign out of your account... Uninstall... to run vacuuming...
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the vacuuming after uninstalling and prior to the relocation is necessary
-https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-
Having trouble getting on the internet
Why is - this all of a sudden my computer can't go on the internet? I have to connect manually to the "network access 4 Local and Internet" whereas before I didn't have to? It took me a while to understand why I could not just first in the internet. I have Mozilla FireFox.
Thank you
Hello
1 did you change on your computer?
2 did you receive an error message?
Method 1:
Step 1:
I suggest you check in SafeMode with network.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2:
I also suggest you perform the clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: Wi - Fi and in Windows network connection issues
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
How to troubleshoot network connectivity problems in Internet Explorer
http://support.Microsoft.com/kb/936211
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
-
Having trouble getting a hotmail account
I get an error message that Windows Vista wwill not not allow me to access my account hotail. What can I do to fix this?
Hello
· Do you use Windows mail or Internet Explorer to connect to your e-mail account?
· What is the exact error message?
If you are using Windows mail, check if you are able to connect to hotmail account since internet explore.
If you have problems to connect from Internet Explorer, I suggest you post your queries in Windows Live Solution center.
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Having trouble getting the voice VLAN on the switch X1052P to work at all
Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...
Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.
Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.
I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.
Network administration > VLAN > VLAN static
Network administration > VLAN > Voice VLAN
I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.
This is the short story from where I am now. Any help is greatly appreciated.
FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.
After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.
I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!
SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.
So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.
-
Cannot get internet access because I need a network card driver?
I'm having a devil of a time trying to find how do I down load a NIC on a flash drive can I install it on my laptop Acer 5253 which will not let me connect to the wifi. I can download the drivers from the web, but not on a usb key then I can plug it into the laptop. I can't get on internet with the Acer laptop so Microsoft can not analyze the problem, and Acer will not even talk to me because the laptop is out of warranty. I am because of my wits end I have no intelligence of the computer. Can anyone help?
Why do you think 'I can download drivers on the web, but not on a key usb then I can plug it into the laptop"?
This is the right way to do it.
The Acer Aspire 5253 download page has two NIC drivers wireless, one for a card equipped with a chip Atheros and the other for a card equipped with a Broadcom chip.
I'm not familiar with how Acer does things; It is possible that if you go here and enter the serial number or SNID Acer, you can get a description of the hardware installed in your particular unit--> http://www.acer.com/ac/en/US/content/system-information
Otherwise,.
- Open Device Manager (click the start ORB, type device manager in the start search box and press enter).
- Expand the "Network adapters" section and look at the entry for your wireless adapter. You should be able to determine if you have an Atheros or Broadcom device by looking at the name.
- If the name does not help, even on the 'Détails' tab, go to the Details tab, select "Hardware ID" in the drop-down list and post back with the first line up where 'SUBSYS' starts. If you have Windows 7, you can right click > copy these data
Example: PCI\VEN_14E4 & DEV_16B1& SUBSYS_96B11849 & REV_10
Ensure the bold part
If you have Windows 7 and have an Atheros device, download this driver --> http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_9.2.0.439_W7x86W7x64_A.zip?acerid=634601180335904424&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205253&OS=712&LC=en&BC=ACER&SC=PA_6
If you have Windows 7 and have a Broadcom device, download this driver --> http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Broadcom_5.100.82.87_W7x86W7x64_A.zip?acerid=634605483323458996&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205253&OS=712&LC=en&BC=ACER&SC=PA_6
-
Having trouble getting an Excel file table
This will probably be a very stupid question, but I could hurt trying to get a table 2D from an Excel file? The file contains two columns of data that I want as a 2D array (or two tables 1 d) and after having tried a number of things I don't get anything up on top of my chart. The attached VI is a work in progress and has been hashed together some other work (it will be used to control scanning mirrors).
Thanks in advance,
Ben
Hi Ben,
I found an article in the Knowledge Base that relates to your specific problem. I linked it below.
Reading Microsof Excel in LabVIEW digital data
After you follow the steps in the KB, I changed the file to a text (.txt) file and was then able to read the data successfully and it draw on the XY graph using a modified version of your code that contains only the item file IO. If you make changes to your data file and then reference in the amended VI that I have attached, this will help to illustrate how you can view your data in LV
I hope this helps.
Best regards
Christian Hartshorne
NIUK
-
The Blizzard Downloader must be used to download patches MMORPG World of Warcraft as some more small are not on the download of files and sites sites third parties with patches WoW can not be guaranteed. Ive turned off Windows Firewall, Ive even tried to create a new rule to allow port 3724 which must be open, my WoW folder is not protected and when I click on the icon to start the download I chose FUNCTIONING as administrater.
The problem is not with my router as the downloader worked fine when I used Windows XP. The patch is stopping at 10% and then to say that it has failed. Sometimes the sound indicating there may be a firewall. (Im using Windows 7 now). I even did a trouble Shooting in my network connection
As it looks like the source of the file is corrupted try to get the file from another source that I had that issue a couple of times on different systems of Vista where the patch would not work on 1 system but on another system of Vista
-
Having trouble getting beyond log in page for WRT54G2 - 192.168.1.1
I'm more frantic in relation to the foregoing. I followed all the instructions on the support without result.
I try to connect to junction box, leaving username empty box and type "admin" in the password section, but on several trys, I get a message "404 none". I actually went to Argos today and bought a new Wireless N home by Linksys router, but not yet open in case I managed to break it. However, it is less and less likely.
All this started when I need my Linksys password to synchronize my Amazon Kindle for the wireless network, but regret that I can not find the information anywhere. I tried even reconfigure the router by resetting it, but cannot go further because I can not access the Linksys set up the page.
I'd be happy if someone could help me, if he succeeds, then I don't open the new one I bought today.
Thank you very much
Jay
Hi again.
I finally set up my Linksys so hope Argos bring the router that I bought. I did not open. The only problem is that the laptop is now showing ' non-connected, choose a connection "."
I'll try to explore it.
Thank you very much.
-
Having trouble getting a Dlink DWL-G820 wireless bridge to work with wrt610n
I'm trying to get a few dlink wireless bridges to work with wrt610n, but not having a chance. I left Wrt610n router with the IP default '192.168.1.1' and configured accordingly bridges with addresses "192.168.1.xxx".
Wireless bridges is not happy. Any ideas? Bridges have been working well when I was with the IPS "192.168.0.xxx" with wrt610n
Sorry guys, the problem was the security setting wireless that I used on the WRT610N, not the addressing system.
Sorry for the inconvenience.
Maybe you are looking for
-
How to copy Firefox download music
Hello lost lg on alarm found online downloaded but how do you get into the music of the alarm
-
Several entries of IP addresses listed for the OD Master
My Open Directory Server works well, but I have a question about the first table that appears in the section Open Directory of the server application. The name of the server and Type are correct, but the address field has 5 IP addresses listed, two o
-
Add a photo jpg to the body of an email
How to add a photo jpg to the body of an email?
-
My event actionlistener on the keyboard does not work properly
Hello world In my app iam generating the output so the user types data into the text input field, so iam adding actionlistener to the keyboard, the problem is that I did nt get data while typing, I need to wait for a while or need to press on enter o
-
I just got my curve 8310 because I needed better ability to voice mail. But now I begin to see the opportunities. I created several files on my laptop to store the lyrics of the songs and diagrams of agreements. It would be really cool if I could sto