having trouble getting my bearings of crop to touch the edge of the paper for prints full page?

Similar Questions

• Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless

  Bluetooth

  Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.

  Can not find the necessary drivers

  Hello

  1 have you tried matching the laptop and the wireless audio link?

  2. What is the number of the model of the laptop?

  Method 1:

  Follow the link below and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)

  I also suggest you to contact the manufacturer to get the required drivers for the device and install it.

  http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html

  http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/VI-VN/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps!

• Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA

  Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA

  Original title: motorola razomax hd

  Hi Bill,

  You can read these articles and check if that helps.

  How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D

  Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device

  Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player

  For more help.

  https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US

  Additional information.

  Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Having trouble downloading a picture on Adobe Stock, without the watermark and quality. Instead, I get only have access to a preview image.

  Hello
  Having trouble downloading a picture on Adobe Stock, without the watermark and quality.

  Instead, I get only have access to a preview image.

  Follow the steps in this post and see if that helps you back on track: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. Tried to download the CreativeCloud Installer, but still now working. How to make creative work Cloud

  Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.

  How can I get Creative Cloud works on 2nd new computer please?

  Hello

  Please use the link below to completely remove the creative Cloud Desktop Application.

  Using creative cloud | Uninstall the creative cloud desktop application

  Hope this will help you.

  Kind regards

  Hervé Khare

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• I would get a single image appears 4 times on a pice of paper to print? How could I go about this?

  I would get a single image appears 4 times on a pice of paper to print? How could I go about this?

  Hi raymondp,

  You can duplicate the layer several times (right/control click on the layer and choose Duplicate Layer) and then move the layers around using move tool you want to that they will organize.

  Kind regards

  Claes

• Having trouble getting a Dlink DWL-G820 wireless bridge to work with wrt610n

  I'm trying to get a few dlink wireless bridges to work with wrt610n, but not having a chance.  I left Wrt610n router with the IP default '192.168.1.1' and configured accordingly bridges with addresses "192.168.1.xxx".

  Wireless bridges is not happy.  Any ideas?  Bridges have been working well when I was with the IPS "192.168.0.xxx" with wrt610n

  Sorry guys, the problem was the security setting wireless that I used on the WRT610N, not the addressing system.

  Sorry for the inconvenience.

• Hi, having trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.

  Hi, I have trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.  Here I did successfully about 3 days ago, but since then has picked up a virus.  I used system restore to restore my computer about 5 days, which was to remove the creative cloud and Photoshop.  Now I am trying to re - download creative cloud with no luck.  Any idea would be highly desirable. -Demian Arend

  Hello

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Having trouble getting an updated driver at the level of OpenGL 3.0

  I have what is called "integrated graphics" IE graphics card Intel (r) HD on a G6950 processor. Level OpenGL display is 2.1 but I want to run some new SW that requires 3.0 (I'm not a 'gamer', it's BASIC SOFTWARE ENGINEERING). If I ask Microsoft to update my driver he says that everything is up-to-date, if I ask Intel driver update, it indicates a higher number release exists, but for reasons that I do not understand that she refuses to install it and when I called them, they said that they didn't think that they had a "duty" to support the higher level! I understand that I COULD buy and install a 'real' graphics card (the two slots are apparently empty right now) but I do not understand, the on-board system is not THAT bad and the graphical utility shows he did 12 cores - how much should I I need a basic system? I mean I don't think that's the problem of Microsoft really everything, but if it should not be possible to help all around it's much better than this? Only 5 years of the system, I've owned previous systems a lot longer! Besides if I have a third graphics card, on what basis should I expect to support their product that is BETTER THAN the Intel? (I guess it would be the problem of Microsoft if the deficit were to the DirectX level?) And where in the docs for a possible card do I know what level THEY are "ready to support"? It's really blow my mind...

  The graphics Intel(r) HD on a G6950 processor card is limited to the Open GL 2.1.

  It is compatible with DX10 but not DX11.

  It is a hardware limitation. There is nothing that can be done to correct this.

  You may well have owned systems that were older than 5 years earlier, but didn't have never been

  facing material limitations like this, but 5 years is, unfortunately, a lot of time in the years of dog/computer. Especially with graphics.

  Apparently your cpu was released in 2010, and I think she's a first version of the most recent

  Graphics card Intel HD, which is integrated into the cpu vs a chip on the motherboard, but is a little too

  early to Open GL 3.0.

  «.. . If I get a third party graphics card, on what basis should I expect to support their product is BETTER THAN the Intel? »

  Intel is not a graphics support period long. It is at least partly due to the fact that drivers is modified according to motherboards, which requires that download you the drivers from the

  card mother mfg if you want a guarantee of stability and the card mother mfg and laptop mfg

  often provide an update of the driver after one or maybe two years.

  -However, Intel updates often drivers for their graphics for a longer period than the card mother mfg, so that you can sometimes download latest drivers for graphics card intel directly from

  Intel or even through updates of Windows (the "optional" section) and have no problem.

  MFG of dedicated graphics cards tend to support their cards with the new drivers for more

  periods ie - Nvidia drivers latest still support graphics cards, released in June 2010.

  They always supported the gpu in their pilots in July 2014 which have been published in ' 05

  Note that while pilots can still support these 'old' cards, there is little or no benefit

  update the drivers for the graphics over three years and "optimizations".

  more addressing the most recent series, in particular cards the last series (in large part because)

  the 'old' series was optimized to the maximum).

  Which brings back us to the motherboard. You may need an update to the BIOS of your motherboard

  to be able to recognize a current or previous series dedicated graphics card (with Nvidia is

  the 700 and 900 series cards).

  This is assuming that your motherboard has a recent enough BIOS update available.

  Then we come to the part concerning power. You should also check the power supply

  Watts/amps to run a card dedicated graphics and loose power supplies

  ability to produce current and complete stability current with age.

  It is less of a problem if you were to add a graphics card down range, as they can often operate

  off the PCIe slot, without electrical connection additional required.

  -Short answer...

  If you need this software for professional (or use the 'new' version at all).

  You can get a more recent machine, if you want to avoid complications.

  And with a new machine, you will not need to use a dedicated graphics card. The new Intel HD graphics

  are much more powerful than what you currently have, especially on the i5 cpu.

  -My 'old' i5 3570 cpu with HD 400 in 2012 can be exhausting to Open GL 4.0.
  In my view, are also capable of up to Open GL 4.0 i3 with HD3000, but have not verified this.

  You should always beware of what new cpu you use as not all of them have an integrated graphics card.

  EDIT: Did a double check and found this on the site of Open GL (this would be for the continued support and would not affect the Intel HD graphics which is able to use OpenGL 4.0) -.

  "Intel does not provide an implementation of OpenGL correct and up to date for their Integrated GPU. There is nothing that can be done about it. ATI and NVIDIA provide good support for their Integrated GPU. »

  .

• having trouble getting hp jet pro 8500 a desktop to scan

  I use OS x 10.6.8 and reinstalled the drivers for the printer/scanner twice, so I know that they are up to date.  If I try to scan from the computer, I get a window that says "HP Scan unexpected closure" followed by many, a lot of technical data.  If I try to scan using the control on the printer/scanner Panel it scanner and sends the file to the computer, but only the upper left quarter of the page.  If I try this several times, the computer freezes and must be turned off.

  Anyone got any ideas?  Thank you!

  OK, if it is HP Scan 3 there is a known bug that will crash.  It is being developed.

  Try to Capture of Image in your Applications folder for this analysis time.

• Having trouble getting a REST to work with our ticketing system

  After building servers my team must complete the tickets for the kickoff of a 'validation' workflow to verify the server is in place and configured as expected. Our ticketing system can accept many REST calls to automate this process and prevent us from manually fill in a form again. However, it seems to use a type of authentication that is not necessarily supported by the plugin to REST.

  API authentication methods. Documentation of Gemini

  The link above is the article explaining the auth method. It's a name of user/key combination that is encoded in Base64. I have my login and my password encoded, but now I don't know how to make the plugin Orchestrator properly to meet the requirements of this API. I tried many things like shared Basic authentication setting and the 'basic' as the username and my encoded string usage in the ' password ' field, but no dice. " I still get a 401 Unauthorized the Gemini project back. Can anyone shed some light on how I might accomplish this? I met a brick wall here.

  Nevermind that. After working with our web developers, it turns out that someone has changed the method of authentication of this goofy apikey led to NTLM. I tried that and you can now query information without problem.

  Ugh! Good news is that I can now move!

• Having trouble getting CF11 install under Linux

  Hello

  First of all, apologies if this (or a similar version) eventually posted here twice.

  I am trying to install CF11 (ColdFusion_11_WWEJ_linux64.bin) on a Scientific Linux machine and make me what follows, as he out craps:

  Preparing to install...

  Extract the JRE of archive installation...

  Unpacking the JRE...

  Extracting the installation resources from archive installation...

  Configure the installer for this system environment...

  Launch of installation...

  JRE libraries are missing or is not compatible...

  Output of...

  My version of java is:

  Java-version

  Java version "1.7.0_71".

  OpenJDK (rhel - 2.5.3.1.el6 - x86_64 u71 - b14) runtime environment

  OpenJDK 64-bit Server VM (build 24, 65 - b04, mixed mode)

  Any of you have any suggestions for what I should do to get this to install?

  Thank you

  Steve

  Well, it was apparently a weird failure mode when / tmp was full.  By defining IATEMPDIR on something with more space, I was able to have it end.  Must say, this is not intuitive.  :-\

  Steve

• Having trouble getting a text automatic reflow to work

  I hae correctly configured my InDesign document and published the first chapter (what I wrote originally in another application, so I had to copy on and redo all the pictures and things).

  Now, I created an extraction of text from this other document for the rest of the text and put it in a .txt file. When I drop this file at the end of my last page, I expect InDesign to automatically add all pages, then all the stuff (100 pages or more) becomes visible. But this does not happen. He finds himself in the unique two-column text block and I get the indicator "there are more adjustments on the page". For the first chapter, doing so by hand wasn't a big deal, but the fact that for a 100 pages is not pleasant and should also not be necessary.

  But what I am doing wrong? I've seen examples and somehow I still doing something wrong. Is there a recipe?

  Hold down the SHIFT key when you click to place the text file and it will flow.

• Having trouble getting an Excel file table

  This will probably be a very stupid question, but I could hurt trying to get a table 2D from an Excel file? The file contains two columns of data that I want as a 2D array (or two tables 1 d) and after having tried a number of things I don't get anything up on top of my chart. The attached VI is a work in progress and has been hashed together some other work (it will be used to control scanning mirrors).

  Thanks in advance,

  Ben

  Hi Ben,

  I found an article in the Knowledge Base that relates to your specific problem. I linked it below.

  Reading Microsof Excel in LabVIEW digital data

  After you follow the steps in the KB, I changed the file to a text (.txt) file and was then able to read the data successfully and it draw on the XY graph using a modified version of your code that contains only the item file IO. If you make changes to your data file and then reference in the amended VI that I have attached, this will help to illustrate how you can view your data in LV

  I hope this helps.

  Best regards

  Christian Hartshorne

  NIUK