Having trouble getting the web addresses to break down page. Any suggestions?

Similar Questions

• Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Nevermind, I finally got it to work, thanks!

• Hi, having trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.

  Hi, I have trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.  Here I did successfully about 3 days ago, but since then has picked up a virus.  I used system restore to restore my computer about 5 days, which was to remove the creative cloud and Photoshop.  Now I am trying to re - download creative cloud with no luck.  Any idea would be highly desirable. -Demian Arend

  Hello

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Im having trouble getting the Blizzard world of Warcraft Downloader to send the last game, tasks in my WoW folder

  The Blizzard Downloader must be used to download patches MMORPG World of Warcraft as some more small are not on the download of files and sites sites third parties with patches WoW can not be guaranteed. Ive turned off Windows Firewall, Ive even tried to create a new rule to allow port 3724 which must be open, my WoW folder is not protected and when I click on the icon to start the download I chose FUNCTIONING as administrater.

  The problem is not with my router as the downloader worked fine when I used Windows XP. The patch is stopping at 10% and then to say that it has failed. Sometimes the sound indicating there may be a firewall. (Im using Windows 7 now). I even did a trouble Shooting in my network connection

  As it looks like the source of the file is corrupted try to get the file from another source that I had that issue a couple of times on different systems of Vista where the patch would not work on 1 system but on another system of Vista

• Is anyone else having trouble getting the CBSsports App load for the Super Bowl?

  I'm trying to get the application to load and it keeps loading and loading up to the point where he goes to the standby screen. I would like to watch the game and it becomes very frustrating

  Yes. We look, in the middle of the national anthem and he went down. Still load do not.

• Having trouble getting the Fax Service to save faxes in encrypted EFS of the user.

  I configured the widows fax service to save faxes received in encrypted in the user folder. So that the files are saved, probably, with the certificate of the user, I configured the Fax Service to log on as a specific user.

  However, after the change is made and try to start the Fax Service I receive,

  "Error 1279: a privilege that the service needs to operate properly does not exist in the service account configuration."

  Watch the event log: event ID 7000, qualifier 49152.

  One can tell me what privileges are required by the Fax Service, and how to add them to the user account. (I made the account to an administrator account and still get the above error.)

  Also, if anyone knows another way to achieve the same goal, would be much too.

  Any suggestions will be greatly appreciated.

  Hi Vista_mb,

  • Your computer is connected to any domain?

  Read the article "some services do not start and you receive an error message after join you a Windows Vista computer to a Windows 2000 domain:"1279, a privilege that the service needs to work properly there is no" http://support.microsoft.com/kb/940668 "

  If your computer is linked to the domain, you can also post your queries on technet community: http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro/

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Having trouble getting the correct strategy of the ESXi 5.1 Compellent Lun path selection

  Here's the FCoE connections to a Compellent table. I was looking for in fact as expected on some new 5.1 ESXi hosts. I changed the default home setting "esxcli storage set - default-psp VMW_PSP_RR - ATAS VMW_SATP_DEFAULT_AA ATAS nmp. The LUN showed 2 paths, Type of storage array showed VMW_SATP_DEFAULT_AA and path selection has been set for the Round Robin.

  I finished rebuilding my hosts with ESXi 5.1 update 1 and made the same change but now the LUN show as VMW_SATP_LOCAL and fixed and I can see only one way? I do not understand why it reacts differently now. Does anyone have any suggestions?

  ~ # esxcli storage nmp ATAS list

  Description of default name PSP

  -------------------  -------------  ------------------------------------------

  VMW_SATP_MSA VMW_PSP_MRU placeholder (not loaded plugin)

  VMW_SATP_ALUA VMW_PSP_MRU placeholder (not loaded plugin)

  VMW_SATP_DEFAULT_AP VMW_PSP_MRU placeholder (not loaded plugin)

  VMW_SATP_SVC VMW_PSP_FIXED placeholder (not loaded plugin)

  VMW_SATP_EQL VMW_PSP_FIXED placeholder (not loaded plugin)

  VMW_SATP_INV VMW_PSP_FIXED placeholder (not loaded plugin)

  VMW_SATP_EVA VMW_PSP_FIXED placeholder (not loaded plugin)

  VMW_SATP_ALUA_CX VMW_PSP_RR placeholder (not loaded plugin)

  VMW_SATP_SYMM VMW_PSP_RR placeholder (not loaded plugin)

  VMW_SATP_CX VMW_PSP_MRU placeholder (not loaded plugin)

  VMW_SATP_LSI VMW_PSP_MRU placeholder (not loaded plugin)

  Non-specific bays of VMW_SATP_DEFAULT_AA VMW_PSP_RR Supports active/active

  VMW_SATP_LOCAL VMW_PSP_FIXED direct support of connected devices

  Thanks for the reply. I found the problem. I had to add a rule esxcli storage nmp ATAS FCoE add - transport fcoe - ATAS VMW_SATP_DEFAULT_AA - description 'Fibre Channel over Ethernet devices' I forgot to note that I did it on the first generation and completely forgotten. Once I added this to the existing a new LUN all show type and path of the storage of table selection.

• Having trouble getting the power of virtual machine state

  HI I have a problem with the addition of the Powerstate VM to the following code:

  Get-data center $DC | Get - Vm | Get-View |

  Select @{N = "VM"; E={$_. Name}},

  @{N = "#NIC"; E={($_. Config.Hardware.Device | where {$_-is [VMware.Vim.VirtualEthernetCard]} | Measure - Object). County}},

  @{N = "#MAC"; E = {[string]: join (",", ($_.))} Boulevard | where {$_.} MacAddress as ""00:50* "} |" %{$_. MacAddress}))}},

  @{N = "IP addresses"; E = {[string]: join (",", ($_.))} Boulevard | %{$_. Ip_address}))}},

  @{N = "Power status"; E={$_. PowerState}} |

  Export-Csv $FilePath - NoTypeInformation - UseCulture

  What I am doing wrong?

  Thank you

  Why it doesn't work it's because this property does not exist on the object SDK your get when you do Get - VM | Get - view. If you use just Get - VM it would work, but it may break some other information you want to recover. To get what you want with the least changes would probably change "$_.» PowerState' to ' $_.» Runtime.PowerState ".

• Having trouble getting the voice VLAN on the switch X1052P to work at all

  Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...

  Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.

  Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.

  I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.

  Network administration > VLAN > VLAN static

  Network administration > VLAN > Voice VLAN

  I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.

  This is the short story from where I am now. Any help is greatly appreciated.

  FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.

  After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.

  I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!

  SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.

  So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.

• Having trouble getting the svg images in Muse

  Hi, I have a problem with importing an Illustrator file in reactive Muse as a vector art.  I created the original in Illustrator CC (latest edition), and then tried to Muse as a vectorized image.  I have tried different methods to date and have asked the experts of the Illustrator, but their suggestions have not solved the problem.  The biggest problem is when I place the logo that it happens with the limit so great that it forces the foot downwards. Once placed, it prevents any selection of other items under.  I could send it back, but it's not fair.  Please see the screenshot.

  Have you have exported the SVG of the file HAVE?

  

  The I would suggest placing it as a filling inside a shape, size based on the value.

  

  

• Having trouble getting the calculations of percentage on logical aggregation count column

  Hi Experts,
  
  I am trying to create values of percentage based on the count aggregation.
  
  For example in the 11g Sample Sales Data Model, I added 3 logical columns, Order_Count, Orders_Shipped, OrdersShipped %
  
  As follows:
  (1) Order_count
  Derives from physical mapping of count (Revenue.ORDER_NUMBER F1)
  
  Shipped_Count 2)
  It's an expression derived for add a filter on the order_count of order_status. So I did this:
  Filter ("Sample Sales".) "Revenue of F1" "." " Order_Count"using"Sample Sales ". "' Revenue from F1. ("' Order_status ' = 3-expedie ')
  
  (3) % OrdersShipped
  Again, it is an expression derived from calc the % of
  "Sample Sales". "' Revenue from F1. "" Shipped_Count "/" Sample Sales ". "' Revenue from F1. "" Order_Count "* 100
  
  In my analysis, the Order_Count and the Shipped_Count display correctly.
  
  However, the % OrdersShipped always displays as 0.0000%.
  
  I changed the format of data for the % OrderShipped to a type of percentage with 4 decimal places.
  
  I also tried to add the % column analysis directly instead of the DM by doing this
  "Basic facts". "count_shipped" / "core facts". "" Order_Count "* 100
  
  Yet once, it appears as 0.000%
  
  Any ideas would be greatly appreciated.
  
  DB
  
  Published by: user4990932 on March 12, 2013 07:04
  Repost

  DB,

  Try multiplying the numerator and the denominator by 1.0. This will throw your integers to floating-point numbers and your result will display correctly.

  I hope this helps.

  -Akshay

• Having trouble getting the raw files to open in Photoshop CS2

  Feel stupid.

  Have the new Canon 5 d Mark II and raw files first shot. Went to open them in CS2 (my old 20 d files open fine) and got the error message.

  Came to the adobe site, new camera_raw.8bi download, followed the instructions to move it in the right folder, old archived. Nothing. Same mistake. Checked the "help > about plug-ins >" and it only shows the gross.

  Returned to the adobe site and looked into the DNG Converter (don't know why I need that - can't I just open it in CS2 as ago?) and downloaded the zip (5.1). No instructions I can find anywhere on what to do with these files. Drag the .exe on my desk and pulled upward, said one of the raw files and. .  . got an error "there was an error of analysis of the file."

  Any help would be greatly appreciated. In particular, I would like to be able to open the files in CS2, if possible.

  Thank you

  Read this technical note: -.

  http://kb2.Adobe.com/CPS/407/kb407110.html

  DNG Converter may be your solution.

• I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

  I lost my msn icon after the upgrade to windows 7. How I connect msn plsu? What is the web address?

  Hello

  I suggest you to contact MSN customer support for assistance.

  Here is the link for "how to contact MSN Support.

  http://support.Microsoft.com/kb/940784

  I hope that helps!

• I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?

  Hold down the key (key in OSX) and press the following letters in this exact order: V T M
  The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.

  See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .

• How to get the IP address of the calling client to the web service built in Jdeveloper 11.1.1.7 application?

  I built an application of web service in Jdeveloper 11.1.1.7 to be used by other clients. Just the General steps as follows (Server web service Application is generated--> deployed on the server-> used by clients with the location of the WSDL file).

  Now, I met a requirement where I need to get the port number and IP address for the client.

  Questions :

  How to get the IP address of the calling client to the web service application generated in Jdeveloper?

  Commune technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology use to built web service application?

  The common technologies used to build web service applications is AXIS or CXF. What Jdeveloper technology allows built web service application?

  It depends on the option selected during the creation of web services (if I remember correctly, there are several options, style J2EE 1.4 RPC style JavaEE JAX - WS 1.5,...)

  For example, to get the ip address of the compatible with jax - ws web service, you need to inject the context in your service class with:

  @Resource
  WebServiceContext wsContext;
  

  and then inside your method:

  MessageContext mc = wsContext.getMessageContext();
  HttpServletRequest req = (HttpServletRequest)mc.get(MessageContext.SERVLET_REQUEST);
  String ip = req.getRemoteAddr();
  

  Dario