having trouble setting up my printer

Similar Questions

• Having trouble setting up on Ubuntu 14.04

  Under this thread:

  http://UbuntuForums.org/showthread.php?t=2229006

  Which refers to this HOWTO:

  http://goo.GL/xlY8xn

  I see:

  [code]

  Configure user@host:~$ sudo /etc/init.d/oracle-xe

  Oracle Database 11g Express Edition Setup

  -------------------------------------------------

  This will configure the startup properties of database Oracle 11 g Express

  Edition.  The following questions will determine whether the database should

  start the system startup and ports, it will use passwords that

  will be used for database accounts.  Press < enter > to accept the default values.

  CTRL-C will stop.

  Specify the HTTP port that will be used for Oracle Application Express [*]:

  Specify a port that will be used for the listener to the database [*]:

  Specify a password to use for database accounts.  Note that the same

  password will be used for SYS and SYSTEM.  Oracle recommends using

  Different passwords for each account database.  This can be done after

  initial Setup:

  Confirm the password:

  Want that Oracle Database 11g Express Edition to be started on boot (y/n) [y]: y

  From Oracle Net listener... Fact

  Configuring database...

  Configuration of the database failed.  Look at /u01/app/oracle/product/11.2.0/xe/config/log for more details

  [/ code]

  You are looking for here, I see:

  [code]

  grep user@host:/u01/app/oracle/product/11.2.0/XE/config/log$ ORA * | uniq-u

  cloneDBCreation.log:ORA - 01034: ORACLE is not available

  cloneDBCreation.log:ORA - 27101: there is no shared memory realm

  cloneDBCreation.log:ORA - 00845: MEMORY_TARGET not supported on this system

  CloneRmanRestore.log:ORA - 00845: MEMORY_TARGET not supported on this system

  postDBCreation.log:ORA - 01034: ORACLE is not available

  postDBCreation.log:ORA - 01034: ORACLE is not available

  postDBCreation.log:ORA - 27101: there is no shared memory realm

  postDBCreation.log:ORA - 00845: MEMORY_TARGET not supported on this system

  postScripts.log:DROP DIRECTORY ORACLE_OCM_CONFIG_DIR

  [/ code]

  Current assumptions:

  I forgot or wrong set a parameter memory somewhere.

  I see:

  [code]

  user@host:~$ sudo cat /etc/sysctl.d/60-oracle.conf

  [sudo] password for jim:

  # Oracle 11g XE kernel parameters

  FS.file - max = 6815744

  NET. IPv4.ip_local_port_range = 9000 65000

  kernel.SEM = 250 32000 100 128

  kernel.shmmax = 536870912 [code]

  kernel.shmmax is 512 MB, but I think that my machine has 16 GB.

  user@host:~$ cat/proc/meminfo | grep MemTotal

  MemTotal: 16326920 kB

  512 * 1024 * 1024 = 536870912 (verified with calculator just in case)

  16326920 k == (16326920 * 1024), i.e. the value in bytes.

  If that's the problem, I do not understand why this is important. With 16 GB, there should be plenty of space. Also maybe this isn't the only place where there is a specification for memory.

  I figured this out on my own.

  move /etc/sysctl.d/60-oracle.conf to ~ / and restarted to make the correct available then I did:

  user@host:~$ grep - n ".» ' * ' / proc/sys/kernel/shmm *.

  / proc/sys/kernel / shmmax:1:33554432

  / proc/sys/kernel / shmmni:1:4096

  OK, so appearing kernel.shmmax = 33554432 60 - oracle.conf and move back to /etc/sysctl.d/
  Then reload:

  starting the service sudo procps

  OK, take - another execution during the configuration:

  configure sudo /etc/init.d/oracle-xe

  Leading to:

  .. all the things we saw before followed...

  From Oracle Net listener... Fact

  Configuring database... Fact

  Starting the database instance Oracle 11 g Express Edition... Fact

  Installation completed successfully.

  Woohoo! :-)

• I'm having trouble on my IPad printer installation. . PHOTOSMART 5525

  I have problems to install the printer with the IPad.  Number CN288194BR of the printer. PHOTOSMART HP 5525.

  [Subject edited to remove personal information]

  Please follow the instructions here in order and answer all questions in detail.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/want-good-answers-ask-good-questions/TD-p/7933

• Having trouble setting up Windows Mail (Vista)

  I opened a new gmail account and tried to use Windows Mail to send/retrieve messages instead of you connect on a browser all the time.  Before the change, I used Windows mail to my Shaw account (a local Canadian internet provider).

  I have still two addresses on Windows Mail and they worked very well last night.  This morning, Windows Mail prompts for a name of user and password for shawmail.  I put them, he fails to send/receive messages and then claim again the entry.

  Gmail or shawmail works now.

  Any ideas?

  Thank you

  Remove the account from Shaw and reboot. The Gmail account is working now? If so, try adding the account of Shaw and see if it works.
   

• I am having trouble printing my document in landscape format, even though I specified so

  I am having trouble printing my document in landscape format, even though I specified so

  * original title - print printer *.

  Hello IBTeh,

  We need a little more information.

  Please answer the following questions:

  What operating system do we use?

  Which printer we use?

  Is happening in one application or in more than one?

  We receive error messages when you try to print landscape?

  We will try to uninstall then reinstall the printer in a specific way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver with the latest version of the Web site of the manufacturer.

  4 reinstall the printer.

  Also, here are some references of printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Best regards

  Matthew_Ha

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• Cannot set the default printer.

  I'm having a problem with one of the users on my setup of server companies. She is unable to set a default printer and cannot print from Excel 2010 to all. However, while on the terminal even when I login as administrator, everything works perfectly. I tried to set a default value manually through the registry, I tried all of the scripts that I can find, I tried to uninstall and reinstall the printers. I don't know where to go from here. Any advice?

  It's a 2003 server.
  The terminal is running XP.
  Printers are all non-local network.
  However, the result is the same for a local printer.

  Hi Cameron LUM,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• HP LaserJet Pro MFP M125-M126: cannot set the default printer

  Hello

  We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,

  quick response is appreciated,

  Hi @darshan9 ,

  I see that you have problems affecting the default printer for users and you cannot print over the network.
  I'd love to help you.

  Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?

  You have administrative rights on the computer to make changes?

  What is the name and the product number of your printer? How can I find my model number or product number?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  I suggest you to check if you have another account user or an administrative account.

  I also suggest to create a new user account and check if you are able to set the default printer.

  Create a user account. Create a user account.

  If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• Having troubling my Master Collection CS5 update

  I'm having troubling update of my Master Collection CS5 it is said that "there is a download error" "altogether and try again. I have an Internet connect and download it, then it keeps giving me the SAME message, over and over again I try to update it.  Help-> updates...

  Any ideas?

  Thank you

  Eric

  For CS5:

  You must update the MAO Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager

  Help > updates should work after the update is installed.

  If you cannot run the installation program, it's probably because he is unsigned and Gatekeeper it blocks. Go to System Preferences > Security and privacy > General and value "allow applications downloaded on the" "Anywhere". Set it back during installation and updates are completed.

  Gene

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• How can Hello I set a default printer with JAVASCRIPT? or send directly to a printer, I am programmer

  I'm a programmer and I need to print the 2 files in 2 different printers (with labels Zebra and letter to a strong), I have the sharp or default Zebra printer when I send the file to print, this take the size default to the default printer and it is printed with this size, a letter as a label and a label as a letter How do I set a default printer in JAVASCRIPT or send a file directly to a printer by JAVASCRIPT?

  How your web application user initiates not print function?

  There are two distinct "Print" buttons on the page? One of the labels for Zebra and other print of the 'letter' to the strong?
  
  Or is it a function of sequential type, where the label is supposed to be printed Zebra and the 'letter' to the sharp in one operation of button "print"?

• Is there a way you can set up a printer hp 7520 to analyze the auto size?

  When I scan from the printer or the computer, I either make real and then later crop size or size to scan. When I had my photosmart hp over the printer. I had to do this it would automatically detect that and scan at that size. Is there a way I can set up my printer to automatically detect the size of everything in the printer? I thought a new printer would be better, but it is causing more and more problems I.

  Hello

  Unfortunately not for this printer, you must select the scanning area we want to analyze

  Kind regards.

• In the Pages, you can set crop marks printer?

  In the Pages, you can set crop marks printer?

  Printer crop marks are not implemented in any version of Pages using v5.6.1. Export to PDF and open it in the designer of the affinity. Once again export to PDF and apply the printing marks in the menu export. The following has been open in the designer of the affinity and exported in the form of a PDF/A-1 a with all the points you see here:

  

• Im having trouble locating bluetooth... product number J812UA #ABA

  Im having trouble locating bluetooth... product number J812UA #ABA

  @bernardchury

  Thanks for joining the HP Forums.
  I'll be happy to help you

  If I understand correctly you want to locate the Bluetooth on the computer.

  I managed to get the specifications of product product number: J8X12UA
  Model name: HP 15-f039wm Notebook PC (click here for specifications)

  For more information about how to check the network options, click here(similar post on the HP Forums)

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Im having trouble to download adobe flash player

  Im having trouble downloading adobe flash player, I can't play a game on facebook and go to google, please help

  http://forums.Adobe.com/message/3952360#3952360