HBA details with number of paths

Similar Questions

• number of paths LUN CF by cluster

  I read somewhere, or someone made the offhand comment that you cannot have more than 32 paths to a single LUN to a cluster of ESX servers.  So for example, say 8 servers in a cluster, all with 2 dual HBA headed.  Say each of these initiators has its own unique target.  Each ESX host has 4 paths to a LUN, x 8 = 32.

  Looking at the maximum rate of config, https://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_config_max.pdf, I don't get such a thing exactly.  Especially because they say a max of 16 HBAS and 15 targets per hba.  If it does not say "number of paths to a LUN = 32.  Does not say exactly if it's per server or cluster.

  Anyone know if this can be an element of planning for ESX 4, due to software such as powerpath for balancing the load/active?

  It is per server, not total.

  -Matt

• See the number of paths per LUN by host

  Hello

  I saw so many scripts these days on how to check my connections of storage, but I still don't get the info for that I'm looking. I'd like to see for each host for each LUN (RDM / Datastore) the number of paths. I found scripts that show me the active paths, paths of deaths and work, but none of them helps me to see the number of paths for each host.

  The following Luke good script seems to be a good starting point, but again once it shows total by hba, that I need for each host per lun.

  $esx = get-VMHost vcdvm580.virtualcenter.lan

  foreach ($hba to (VMHostHba Get - VMHost $esx - type "FibreChannel")) {}

  $target = ((get - see $hba. VMhost). Config.StorageDevice.ScsiTopology.Adapter | where {$_.} Adapter - eq $hba. Key}). Goal

  $luns = get-ScsiLun - Hba $hba - LunType 'disk '.

  $nrPaths = ($target | % {$_.}) Lun.Count} | Measure - Object - sum). Sum

  Write-Host $hba. Device ' target: ' $target. County "devices:" $luns. County ' path: ' $nrPaths

  }

  Any help would be appreciated.

  Gabrié

  You mean something like this?

  $esxName = "MyEsx".

  $esx = get-VMHost-name $esxName

  $esxcli = get-EsxCli - VMHost $esxName

  $hba = get-VMHostHba - VMHost $esx - type FibreChannel | Select the name of ExpandProperty-

  $esxcli.storage.core.path.list () |

  Where {$hba - contains $_.} Adapter} |

  Group-object - property feature |

  Select @{N = "MON"; E={$_. Name}},@{N='#path'; E={$_. Group.Count}}

• . can howb I find information about a moblile with number?

  . can howb I find information about a moblile with number?

  What number, information and mobile are you referring?

  Please see: http://support.microsoft.com/kb/555375 on how to ask a question effectively. It is in your own interest to do as this increases your chances of having an answer quickly to your question correctly.

• Urgent: how to create a shortcut with a relative path?

  I put a set of files and folders nested on a server on a network location.  (Use of office machines Vista; I don't know that the server is running.  The files are a text file and two Office 2007 files).  Users will copy this set-up files on their computer (there is a program of VBA macro in a Word document, they need).  They need tomorrow (Friday) and the shortcut path gives me fits!

  The hierarchy looks like:

  MainDir
  File.txt
  SubDir1
  Shortcut to the Word file
  SubDir2
  Word file
  Excel file

  I don't think even the paths associated with the shortcut until I looked a little deeper.  Because I put all the files and folders together on my computer, when I did a drag - move in the folder on the server, the target properties and start in the shortcut always pointed at my computer!  So now, I'm afraid that a user copy this on their machine will have a shortcut that points to ~ my ~ computer, instead of the file on their computer.

  I deleted the shortcut located on the server and creates a new one from the Word file in the directory on the server.  Better - I think - but it still points to the location of the server.  And it is even more likely that, when the user opens the shortcut, it will try to open the file on the server, vice the file on their computer.

  How can I create a shortcut to this Word file that will pick up the relative path from around where to reside?  I can just click > properties and change the target and start in paths?  Or do I need a VBScript or VBA?

  I have to get this done fast!  A kick - in the right direction is greatly appreciated.

  Ed

  Hi Ed,

  It is not possible to create a shortcut with a relative path.

  You can try the following allows to bypass and check if it helps:

  Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the

  The shortcut properties.

  a. make a new shortcut to: cmd.exe /c start.

  b. now right-click on it and get the properties of the shortcut (shortcut tab).

  c. the shortened full path must have been set to this:

  %windir%\system32\CMD.exe /c start.

  d. set the directory of "start in" (i.e. DLG) to be a relative path:

  (Example for a shortcut on the desktop)

  ...\SendTo

  e. click on "change icon...". "and set" look for icons in this file: "to: %SystemRoot%\system32\SHELL32.dll and press ENTER.

  Standard folder icon will probably be in the lower right.

  f. now you can copy this file and simply change the "start in:" to make new related shortcuts directory.

  NOTE: The above steps are just an example, so try this at your own risk. And check if it works.

  You can also read the following article and check:

  Folder redirection fails when you specify the mapped network drive or the Environment Variable

  http://support.Microsoft.com/kb/321805

  You can check out the following link and also post your request in the Technet forum for further assistance:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Hope this information is useful.

• Impress us with number of views/sales on ACE

  Hello everyone!

  Are there people who can impress us with number of views/sales on ACE?

  I have just 54 accepted, more photos in review mode, but no./zero views not to talk about sales. )

  Hello sanderl90906377,

  Thanks for writing. I can't share specific numbers with you thought that I can tell you that there are many contributors, earning a significant income by Adobe Stock. I'll tell you this, you will get out of it what you put into. My recommendation while you are getting started is to focus on the creation of content and presentation. Be diligent with Keywords to ensure that your images are seen. It takes time to build your porftolio but once it happens, if your content is good that your sales will come.

  Good luck!

  Mat Hayward

• I just opened my Acrobat 9 Pro and received an error message indicating that my license had expired with number (148: 3). What is c?

  I just opened my Acrobat 9 Pro and received an error message indicating that my license had expired with number (148: 3). What is c?

  Restart your flexnet licensing service, http://techie-buzz.com/how-to/fix-adobe-error-code-148-3-licensing-issue.html

• Is there a performance issue associated with SPARQL property path?

  Is there a performance issue associated with SPARQL property path?

  When we use paths property is our SPARQL queries, the queries never ends. I have a general problem, or do you have a problem with Jena and jena adapter version?

  We run Oracle 12 c. The Jena adapter has version 12.1.0.1.

  Thank you

  By Oyvind

  None of these requests ends. We have 300000 tuples in the model.

  SELECT subclass, superClass

  TABLE (SEM_MATCH)

  "SELECT? subclass? superclass WHERE {? rdfs:subClassOf + subclass? superclass} LIMIT 10'.

  SEM_Models ('isall1_x'),

  NULL, null, null, null,

  (= T, timeout = 100, qid = 123, STRICT_DEFAULT = F'));

  SELECT subclass, superClass

  TABLE (SEM_MATCH)

  "SELECT? subclass? superclass WHERE {graph? g {? subclass rdfs:subClassOf +? superclass}} LIMIT 10'.

  SEM_Models ('isall1_x'),

  NULL, null, null, null,

  (= T, timeout = 100, qid = 123, STRICT_DEFAULT = F'));

• Folio in detail with a free subscription

  Hi, I would like to know the correct way to change my application kiosk with a free subscription to a paid Inapp. What happened if I submit a folio of detail with this type of subscription?

  Please help me so that my new application or the inapp is not rejected.

  If there is something I need to know or do it please let me know.

  Thanks in advance.

  You can update your application to change from a free subscription to the retail. When you submit your in-app purchase, Apple invites you to submit a new version of the app at the same time.

  Note that anyone who signed up for your free subscription will continue to get all of the free content, including the content of retail sales. Free membership lasts for always (or something like 35 years, which is never actually in the years of the app). The right to the subscription does not change when you update your app. You might want to consider creating a new application and pointing to it from the existing application.

  -Bob

• Make a group of clipping with a compound path

  So, as of today, I am new to scripting for Illustrator, I use the ExtendScript Toolkit. However, I am not new to my own script solutions and I do not have any experience with JavaScript.

  What I'm trying to do is the following: for all selected items-> duplicate selected item and make a group of simple clipping with it

  What I'm left with visually does not change the picture, but gives me a lot of clipped colored areas that I then can I change in isolated mode, which allows me good shading faster and better. That the doing by hand takes hours on some pictures, it would take a second with a script.

  The script itself is already works for normal PathItems. As evident in the title, as soon as I have to apply the same thing to CompundPathItems things stop working. My question is a bit like this old thread [problem with clipping path transparent], but I couldn't find a solution because I get different behavior.

  When I run the same script that works perfectly with the normal PathItems with CompoundPathItems I get this: 9046 error: the top element in the group must be a path element to create a mask

  Well, it's a problem. There is absolutely no difference between making a clipping with a simple path mask and a compound path in the GUI. Frankly reference guide not helped with this problem at all, the only thing that I learned from it is that the CompoundPathItem object is an attribute of cutting, but those included PathItems.

  Here's what I have so far:

  
  

  	If ([i] selected. TypeName == 'PathItem') {}
  	newGroup var = doc.groupItems.add ();
  	copy is selected [i] .duplicate (newGroup, ElementPlacement.PLACEATEND);.
  	Selected [i] .moveToBeginning (newgroup);
  	newGroup.clipped = true;
  	}

  As I said, this part is exactly what it is supposed to do for normal paths.

  For CompoundPaths, I use this work around.

  	If ([i] selected. TypeName == 'CompoundPathItem') {}
  	newGroup var = doc.groupItems.add ();
  	copy is selected [i] .duplicate (newGroup, ElementPlacement.PLACEATEND);.
  	Selected [i] .moveToBeginning (newgroup);
  	compoundItems = selected [i] .pathItems;
  	compoundIndex = compoundItems.length;
  	for (f = 0; f < compoundIndex; f ++) {compoundItems [f] .clipping = true ;}
  	var lineList = new array (10);
  	for (l = 0; l < lineList.length; l ++) {lineList [l] = new Array (I * 10 + 50, ((i-5) ^ 2) * 5 + 50) ;}}
  	newPath = app.activeDocument.pathItems.add ();
  	newPath.setEntirePath (lineList);
  	newPath.moveToBeginning (newGroup);
  	newGroup.clipped = true;
  	newPath.remove ();

  Mind you, this workaround works in so far that it ignores that annoying error and evil and composite clipping path also works with the only problem being that created composite clipping path as it is always displayed in its original colours in the layers section and is always selectable. When I lock the composite clipping path I can work with it, but still...

  So the question is, what am I missing here? Surely, there must be a good way to do this.

  app.executeMenuCommand ()? That is me away so far, might be just the right thing. I will definitely take a look, now just to find a ref about it, because unfortunately official documents Ref I do not mention this command. Any place with a list of possible commands?

  Ah, also of course I only do for the isolation mode. If you care to hear the background, it is here:

  As I said it's for photos of shading, I'm working on. I repeated and tried through a bunch of techniques. For example, gradient mesh on my first few true works. Now these cracks don't do well with complex shapes, which previously I mitigated by using a simple square or rectangle gradient mesh and using the original form as a color clipping mask. It worked, but it was a huge field of work.

  After a lot of attempts that I went to the use of simple gradients as a background for the form, and then I do the shading freehand with the blob Brush tool, using a graphic style and filters to make it look like to the right. Is better, but do it right all the clipping masks takes me much more time than anything else.

  Now the problem is that shading is not supposed to cross the lines, it's impossible to do correctly without messing up the order, either using clipping masks, where the script. Because you know, if you use a form of the task with a strong Gaussian blur near the lines, you'll find yourself with stuff on both sides. If you do not start close to the line that the shading will be not look right if the darker the shade needs to be close to the line. And that's where magic of clipping masks.

  And finally, here's an example of how I work with the script and the result:

  After that I drew a sketch, adjust the line widths and at the neatness I turn the paths to sketch the lines and then turn them into a live paint Group (which would ruin the line widths, unless you put the paths in first contour lines).

  With this live paint group need me a few minutes to color my piece dish. Then I develop the live paint group, in case of doubt, spend a few more minutes to make transparent traces of all regions, I need the shadow in one piece, and then I select all areas and use my script to activate the neat clipping masks. Then I can click on any field, enter the isolation mode, and go up one level, so I'm in the appropriate group, where I can shadow freely without the problem beyond the lines.

  At the end which allows me to apply shading complex and comprehensive, without wasting time to get there.

  PS: well, I just found out that draw inside is really close to what I want to do, and oddly enough, it produces the same Visual discrepancy with transparent traces that produces my script. I'll take a closer look that, while my script is a little more than just the stuff of clipping mask, so maybe I'll go for a hybrid solution. Everything that makes for a better workflow.

• Combine and join the two railways closed with a straight path

  Hello

  I have two way closed and I need to combine or join them with a straight path. When I selected all and do a right click for you join, he did not join. Please see my screenshot. Thank you.

  

  You cannot create Y-junctions.

  You can perform one of the two possbilities:

  Simply place the path open everywhere where you need and leave it there.

  convert all forms with object > path > describe stroke and then use the pathfinder functions.

• View the number of paths and the political path for each data store

  Hi all

  Seem to be stuck on this one. and all that seems to be able to find through topis and scripts for the air path setting. All I have to do is list each data store to its policy of access road and the number of path for the data store on the host computer.

  I'm gussiing it uses the get-vmhoststorage cmdlet?

  Any help much appriciated.

  Phil

  Try something like this

  Get-VMHost | %{
       $esxImpl = $_
       $_ | Get-ScsiLun | where {$_.LunType -eq "Disk"} | %{
            $_ | Select @{N="HostName";E={$esxImpl.Name}},
            @{N="Path";E={$_.CanonicalName}},
            @{N="Policy";E={$_.MultiPathPolicy}},
            @{N="Number";E={($_ | Get-ScsiLunPath).Count}}
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Open Save dialog file with the default path

  Hi all

  I want to open a "file save dialog box' with some default path.

  As when the user run this script I want to open a dialog box "save under" with the default path "/Volumes/ < noun > / < folder name > /...» »

  I use

  File.SaveDialog(prompt, filter);
  

  but it does not open in the default location, I want to open.

  Thank you

  Hard

  Look at this thread to see if it can help

  http://forums.Adobe.com/thread/1077267?TSTART=0

• Export image with a clipping path

  I tried to export all images from a PDF file, but then all the images got their own history. They were placed in Indesign with clipping path, then I won't be able to see the origins in Indesign / PDF.  How to export single images with clipping again path?

  Thank you!

  Acrobat exports only the image, not the clipping path.

• Urgent! Master - detailed with the option/Hide search

  Hello
  
  I developed a page OFA master / detail with the option/Hide.
  
  in my search option, I have main and detail columns.
  
  
  How can I control query vo level of detail.
  
  
  For example. If I pass point not in the search option as well as customer, I could get only this line item for this CUST.
  
  
  I created the main query parameters and I'm passing param values in a methos to AM.
  
  When I click on show details his exception throw.
  
  
  Can someone help me please how to do this. Its urgent...
  
  
  
  Thank you

  Hello

  Error is due to the original Version of details may not get the value of the bind variable when judicially.

  Check your steps with this link http://apps2fusion.com/at/51-ps/333-oa-framework-master-detail-region-mandatory-steps.

  If still you face the same thing then let us know.

  Kind regards
  GYAN