HD has failed
I have a HP S3560, produced no. KT489AA-ABG, serial number CNX8240wkj. The hard drive failed on this unit, so I lost everything. I have a spare one HD that I can climb to the top, but how do I source a new copy of the original Windows Vista Home Premium. The unit still has the original Windows Vista sticker on the side. Thank you very much.
If you no longer have the recovery disks and all twenty-five characters in the license activation code are visible, then you have the chance.
Download an ISO of Vista file and burn it to a DVD to an installer.
Tags: HP Desktops
Similar Questions
-
I'm trying to migrate all my email from Thunderbird to my Google Mail account. I have my old email into local folders, and I have my Google email account set up successfully as an IMAP account. I'm dragging E-mail folders under local folders to folders in the title of the IMAP account.
Sometimes it works fine, but most of the time, I get an error "the current command has failed. The e-mail server for account [email protected] replied: not able to analyze command. "I can often with success select and drag 30 messages, but sometimes it fails with even a single message.
Any suggestions?
Several suggestions.
1 turn off email scanning in your anti-virus product against struggle.
2. create an exception in your anti virus for Thunderbird profile folder.
These two just release the process and remove barriers to the process.
3. check the amount of data you have used for 24 hours. Google have a limit. about 200 MB I think. But I can't really remember. -
Sending the username and password has failed. Need help!
I was denied the opportunity to send messages. Received a notice: "the sending of username failed. Mail server mail.comcast.net answered the authentication has failed. What to do? I don't know what happened. I could send and receive yesterday. Please notify.
Post your troubleshooting information for your server settings can be examined.
Helps in the menu. Troubleshooting information. Clear the check box to include the account names. Then click on copy to the Clipboard. Come back here and paste in a window of response. -
This morning my password has failed, though even I nothing changed
I'm unable to access my email account. I get the following message: send password for user Purpnet has failed. Mail server pop.verizon.net responded: authentication failed
I have nothing to engage this failure. Can you help me?
Since I can't access my e-mail, please respond to [email protected]
Thank you.
We respond to the address that you specify in the forum.
Please send your account settings to correct information in the Help menu. I guess that Verizon finally extinguished some inherited settings that have not been updated, which is the usual cause anyway. Or your anti virus is having a spasm, but lets try easy things first.
-
My T-bird was working fine last night but this morning I get an error message starts "the RETR command has failed..." "whenever I try to retrieve new messages (he tells me there are 23 of them), I get this error message. I use the version above on a Windows XP machine running.
No one here has the ability to do anything to your email address. Your email provider was just having a bad day and it is corrected now.
-
Hi all
I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.
This is the code:
Tell application "Mail".
theMessages set of selection
Repeat with thisMessage in theMessages
the value of the theAttachments attached to a letter of thisMessage
Repeat with thisAttachment in theAttachments
the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment
Save thisAttachment in file theAttachmentFileName
end repeat
end repeat
tell the end
The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.
The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.
Any help would be greatly appreciated.
Kind regards
Beem
If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:
Try
game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias
on error - file does not exist
return Beep 3
end try
say application "Mail".
activate
the value theMessages to the selection
Repeat with thisMessage in theMessages
thisMessage Open
say application 'System events' to say process "Mail".
click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1
Repeat until sheet 1 window 1 is
end Repeat
key sequence "o" using { control down,shift down}
key sequence "Nutty".
click on button 'Save' of the sheet 1 of window 1
Repeat while sheet 1 window 1 is
end Repeat
key sequence 'w', using {control down} - close this message
end say
end Repeat
end say
-
the application has failed to start because its side by side configuration is incorrect
I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect
Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
You can try to use the sxstrace tool to see if you can find which files are missing or damaged. -
Qosmio X 500-10T - integrated controller has failed
: The embedded controller (EC) has failed in the specified time-out period. This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly.
Hi all
Now, I get an error very very annoying.
Qosmio X 500-10T is freezing with more frequency with the message above in Event Viewer.
I reinstalled Windows 7 to factory settings and added all fixes Windows 7 etc with no luck to solve the problem.
I also installed last BIOS update.
Any ideas what to do?
Thank you.
Hey Buddy,
I agree with the user above. If you have already reinstalled Windows 7 back to factory settings and installed the update to the newest BIOS, it seems to be a malfunction of the equipment. In this case, you need professional help from an authorized service provider:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerIf your laptop is under warranty, the repair process is free for you. :)
-
We found no boot disk or startup disk has failed?
OK, so yesterday my wireless mouse is broken, I restart my computer to get it to work again. When I did, it has not fixed my problem, so I went online to see some solutions. When I went on a secure site, I got an alert on my computer and something about 2 programs being completed. It seemed was going to turn off the computer, and in a panic, I turn it off. When I turned it back on, it went straight to the verification of the startup disk. And it gives me the message: no boot disk was detected or the startup disk has failed. I got it a couple of times before and all I ha do turn off two or three times, and he'd turn out normally. It won't work, and I tried several ways to remedy. I clicked on F2 and F8 a F11, but nothing works, and I do not have a cd with media recovery settings. Any help would be appreciated.
When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.
Turn on your computer and immediately start typing the appropriate key 'F' to run the hardware diagnostics or system on your computer. Then, run the hard drive test and report the results. If the hard drive has failed or is about to fail, you may need to replace the hard drive. If the hard drive is reported as 'OK', the boot sector, or the hard drive was damaged and the operating system must be repaired or reinstalled.
You may need to use your HP recovery disks to solve each problem above. If you create your personal series of HP, as suggested by HP recovery disks when you configure your computer... you will need to order a series.
Please send BRAVO
-
I have a terabyte external drive that I use for backup with Time Machine. When I restarted my iMac this morning there was a mistake that OSX could not write the disk. It is said that he can still read, but not write (plenty of space on the disk). I tried to run disk first aid on the disk but it completely after about a minute and said: 'first aid process has failed. If it is possible to backup the data on this volume. Click OK to continue. Details on the error message include:
Check the file catalog.
Invalid key length
G volume could not be verified completely
File system check exit code is 8
...
File system check or repair a failure.
Operation failed.
Is there anything else I can do, or the drive is now a paper weight?
It seems that the file system on the external drive is messed up.
(1) you can try a more powerful file system recovery tool.
Perhaps Disk Warrior has the best reputation for this:
http://www.Alsoft.com/DiskWarrior/
(2) you can reformat the drive with disk utility
How old is the drive? You can think to replace the hd in the case of the external drive. It is usually a fairly simple process. Remove the drive encloser to understand what type of connection of the disk is used.
-
A HARD drive has failed in a RAID1
I have an IX2 - dl and 2 X 3 to disks configured as RAID1. I received notice that one of the drives has failed. Instead of replace the failed drive, I want to 2 X 4 to also be configured as RAID1. I know how to install the disks and all that. I was wondering if I could still read that the content of the working group still 3 TB drive in a PC?
Hello tangwong,
Here are a few links to knowledge base articles that should help you:
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/32099/kW/upgrade
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/30797
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/30456It is not really possible for the average user to mount these disks on a PC and read because there is a firmware on the disk partition and file system is based on Linux.
-
RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko
Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."
I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink
http://eng.ralinktech.com.tw/support.php?s=1
My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.
I tried to install all kinds of different ways but were not able to make it work.
Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus
Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Windows 7 discussion groupsThey may be able to help in obtaining the wifi USB adapter to work.
8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services
-
Original title:
Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.
Hello
1. what version of Windows is installed on the computer?
2. are you aware of any changes made to the computer, before the show?
Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.Method 1:
Step 1: Perform a boot minimum troubleshooting and check which application reports this error
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.Step 2: reinstall the application.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programMethod 2:
Run an analysis of auditor of system files on your computer and check for the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833I hope this helps.
-
Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe
the application has failed to start because its side-by-side configuration is incorrect
Hello Pecky,
Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:
http://windowslivehelp.com/product.aspx?ProductID=2
Thank you
-
original title: "Online connection" disappeared... WHY???????????????
My computer keeps a box indicating "Dial up connection" has failed or something, then the "connection online" has disappeared... WHY???????????????
Hello
· What is the operating system installed on the computer?
· Did you change?
Check if the following items to help you.
How to troubleshoot possible causes of Internet connection problems in Windows XP
The problems of Internet access in Vista
Respond with more information so we can help you best.
-
Windows Vista SP2 has failed twice to install (KB948465)
Original title: my windows automatic update is on sp2 for vista has failed 3 times to download, patch and the reg. updates are still to come, please notify
Windows SP2 failed twice to download (KB948465)
Hello1. what message/error code that you get when you try to install the update?You can check the logs in the event viewer .I suggest that you put your computer in a clean boot State, and then try to install standalone update .Note: Restart your computer as usual by following step 7See also:You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Maybe you are looking for
-
I incorrectly wrote the screen name. I wrote squidqueen instead of Squidqueen. Firefox remembers squidqueen and when I try to connect as Squidqueen it autocorrects to squidqueen (lower case s, rather than S capital). I erased the history and cookies
-
How to format USB 3.0 player to play more than 4 GB on TV media
Hello I'm looking for a way to format a USB drive to play media on my television. This problem seems to occur when the upgrade to El Capitan. I could always format the USB to play large files of 5 to 15 GB and easily play through my smart TVs. I am a
-
console Xbox banned and cannot play online. How can I get ban lifted?
Recently, my Xbox 360 console has been banned. I know that my son plays did do things that were against the terms as such. I read them to him and he understands now see how I already paid for online use, I was wondering if the console suspension coul
-
Hi, how can I add more data in the buffer that already has values? example: byte[] _byte = new byte[3]; _byte[0] = 'A'; _byte[1] = 'B'; _byte[2] = 'C'; DataBuffer_buffer = new DataBuffer(_byte, 0, 3, false); OK, here I have values 'A', 'B', 'C' in my
-
BlackBerry Smartphones Block unsolicited calls
How to block unwanted with my BB 9810 calls?