HDL Interface node from the IP Net efficiency

Similar Questions

• Cannot find the HDL Interface node

  I have MyRio and LabView 2014 with all modules installed and updated to date.

  Xilinx 2014 is also installed and I can compile for FPGA.

  However, in the block diagram I find interface HDL node for the import of VHDL code. As see you in the second screenshot.

  How can I solve this problem?

  

  

  There are no node integration IP in 2014 of LabView. Use instead the HDL Interface Node.

  Yes I used the HDL Interface Node and it has worked very well.

• Syntax of use YES to remove a node from the RAC

  Hello
  
  In reference to the Oracle documentation on the deletion of a node of RAC environment, it showed two syntaxes
  

  -- syntax one
  ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES={rac2}" –local
  
  -- syntax two
  runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME CLUSTER_NODES="" –local

  In one, he used CLUSTER_NODES = "' and the other 'CLUSTER_NODES = {rac2}'"
  
  They are both correct? Made the CLUSTER_NODES = "" means the current node is affected? "
  
  Thanks in advance.

  to remove a node, follow the steps

  1 remove ASM Instance
  srvctl stop asm - n
  srvctl remove asm - n
  RM - r $ORACLE__BASE/adfflin / + ASM
  RM - r $0RACLEJOME/dbs / * ASM *.

  Finally, delete all the entries in the/etc/oratab ASM. These entries have the prefix + ASM

  perform the backup of your rock when you have completed this
  operating mode.

  2 remove the listening process
  As the Oracle user, on any node in the cluster, run the netca

  On the Configuration page, select the Cluster configuration and click next to open the Active
  Nodes page.

  On the page of the active nodes, select the node that you want to remove and click next to display the home
  page.

  On the homepage, select listener configuration and click next to open the page of the listener.

  On the page of receiver, this time select Remove and click next to open the Select listening port page.

  On the Select listening port page, specify the listener to remove.

  The NETCA will stop the listener daemon and remove the content of $TNS_ADMIN/listener. ORA

  3 remove the software from Oracle database

  On the node that you remove, log in as user oracle and

  come on in ' cd $ORACLE_HOME/Yes/bin '.

  . / runlnstaller - updateNodeList ORACLE_HOME = $ORACLE_HOME CLUSTER_NODES = ""-local "

  Start the YES program and delete the Oracle Home
  CD $ORACLE_HQME/Yes/bin
  . / runlnstaller

  The YES homepage will be displayed again. Click on uninstall the products and inventory
  dialog box will be displayed.

  4. update inventories on the remaining hosts

  . / runlnstaller - updateNodeList ORACLE_H0ME = $0RACLE_H0ME "J0DES CLUSTER is ud1 UD2".

  5 remove the Configuration of the specific node Interface

  racgons remove_config :

  6 turn off the Applications Oracle Clusterware

  local sharedvar sharedhome rootdelete.sh

  7 remove the node from the OCR

  Delete the Oracle cluster node and update the OCR using the $CRS_HOME/install/rootdeletenode. sh script.

  8 remove the Oracle Clusterware software

  . / runlnstaller - updateNodeList 0RACLE_H0ME = $CRS_H0ME CLUSTERNODES = ""-local CRS = true "

  9. check the deletion of nodes using CLUVFY

  cluvfy model crs n all the

• Remove the node from the Cluster

  Hello, I followed Metalink Doc-ID 466975.1 vip remains online, but how do I remove vip entrance? I work with 10.2.0.4 version.
  
  Thanks in advance!

  Looks like the entrance is not excluded from OCR.

  Use crsctl unregister command to remove it from the OCR.

  Also take a backup of the OCR prior to this operation.

  Concerning
  Rajesh

• MAX: Devices & Interfaces missing from the tree?

  Hi all

  I'm a noob and try to learn LV

  I'm working through the book, Labview for everyone, and I work in the chapter on the instrument control.

  I opened MAX (Measurement and Automation Explorer) and want to see the ports on my computer.

  It is said in the book and local help, click on the link devices and Interfaces in the tree view on the left hand side... but I do not see this option. All I see is

  My system

  Software

  IVI drivers

  Remote systems

  Is there anything else I need to install? I looked on the installation disk and I don't see anything else?  I'm going to need to talk via USB / RS232 / serial port to communicate with a Board I'll receive it soon...

  Can someone give me some advice on what I should get get the devices and Interfaces > Ports on MAX?

  I looked on the forum here and I've seen people with the same problems that had not installed a NI-VISA. I have check and it seems that I do:

  NI-VISA 5.0.3

  Duration of NI-VISA 5.0.3

  I'm under LV 2011

  Thank you in advance!

  Cayenne

  It's the wrong version of the VISA for LabVIEW 2011.

  NI-VISA and compatibility of the versions of LabVIEW for Windows

  Be sure to only run records of device driver provided with LabVIEW 2011 after the installation of the 2011 LV.

• Cannot delete vm orphan and inaccessible from the inventory.

  An accident during a svmotion, vm orphans and tried to readd to the inventory, but not luck.  I have since restored the virtual machine from a snapshot of the san and removed all the original files and it is now part of a new folder, but I can't remove 2 items in inventory that I tried from it readd after the initial failure.

  I restarted the server, I rebooted mgmt-vmware and vmware-vmkauthd vpxa. -several times now.

  VMware-cmd - l host does not list any reference to the virtual machine ghost.  Cannot remove vclient

  vitoolkit (powershell) will list the 2 vms,

  get-vm-name vmname -

  ---

  product name of the virtual computer object.

  but I can not:

  get-vm-name vmname | remove-vm -does not work because I get this error message... "Remove-VM: 2009-05-11 21:05:02 delete VM a general error has occurred: you must turn off the virtual machine and complete the migration before this operation is called. »

  nothing I've tried annoys me to remove the orphan.

  I worked with vmware on this issue support and ended up coming up with my own 'solution' if it's that a cluster just a fix is quite simple...  I had the same symptoms you had as well...

  1. place the knot in Maint Mode

  2 remove the node from the Cluster

  3 Add the node in the Cluster.

  Presto - fixed.

  Question of fact, here's my thread of origin on this issue. http://communities.VMware.com/thread/203764?TSTART=0

  According to me, the only drawback is that if you have Pools of resources in place it will be those screw up on this node/vm... but is it really wasn't a question/problem for me in my case...

  -

• server side script, update a node in the collection of the 3rd party db

  Hi all, someone had hopefully create/update a node from the collection of a side script server?  I managed with a script server-side, but I'm looking for a way to get a node from the collection with a cron job, or similar.  Can help? Thank you, Doug

  A little bird told me that there is a new SDK out there with support server side for things like createNode, publishItem, etc.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• no noise from the window and not able to hear movies net movie

  No sound from the computer, not able to hear flck net movies

  The following link might be worth a visit:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

• When I print from the net impression is too small to read.

  I have a printer hp 4500 envy when I print from the net, the print is too small to read that I can not find anywhee for change of size of printing or the size of the paper on this printer?  I just bought it.

  Auburn2932,

  Welcome to the HP Forum.

  In most cases, the print size - especially on the web - is controlled with preview before printing.  Print preview is a feature of most browsers and web editors.

  Please take a look at the next Dragon for further information Document:

  Change size print with preview before printing

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Script to send alerts when new IP Interface from the DHCP server

  Hi all

  I have a few branches with a cable ISP with dynamic IP company, I'm trying to create a script to automatically send an e-mail if the interface get a new IP address if the GET the previous interface IP do not send an email.

  So far, this is the script that I created:

  TEST2 event manager applet
  event syslog "Interface FastEthernet1 assigned DHCP" model
  command action 1.1 cli 'enable '.
  action 1.2 cli command "show int FastEthernet1 | I have Internet address. "
  Action 1.51 regexp "Internet address is 9.9.9.9/30" "$_cli_result".
  Action 1.6 If $_regexp_result eq '0 '.
  action mail 2.0 to [email protected] / * / to [email protected] / * / subject to "NEW IP ADDRESS' SMTP server. Making body "$_syslog_msg".
  2.1 action ended

  The only problem with the script is that if the interface get a new IP address, I need to update the script in action 1.51 regexp with the new IP address so next time the interface to change the IP address to compare with the Internet address variable is...

  Thank you

  There are a number of ways to do what you want.  A Flash file is probably the easiest because it persisted resets.

  Event Manager applet check-ip

  event syslog "Interface FastEthernet1 assigned DHCP" model

  command action 1.0 cli 'enable '.

  type of handle-error action 2.0 ignore

  Action 3.0 file open fd flash: myip.txt r

  Action 4.0 if $_error don't FH_EOK

  4.1 action set currip "0.0.0.0".

  Action 4.2 else

  Action 4.3 file gets fd currip

  Action 4.4 file close fd

  end of the action 4.5

  out of action 4.6 type handle-error

  action 4.7 cli command "show int Fa1 | address Internet Inc"

  Action 4.8 regexp 'address Internet's ([0 - 9.] (+)' ' $_cli_result ' match myip

  Action 4.9 If $myip not $currip

  Our action 5.0 mail from [email protected] / * / to [email protected] / * / subject to "NEW IP ADDRESS' SMTP server. Making body "$_syslog_msg".

  Action 5.1 file open fd flash: myip.txt w

  action file 5.2 puts nonewline fd $myip

  action file 5.3 close fd

  end of the action 5.4

• ERROR, called from the thread NON-INTERFACE QThread

  I am trying to load an image using QtConcurrent:map at the same time and I received this error.

  WARNING: ApplicationPrivate::context: ERROR called NON-INTERFACE QThread thread (0xf9ff68, name = "thread (pooled)" ")
  Fatal: ApplicationPrivate::context: method called from the UI thread

  I simplified the code as follows:

  imagescaler::queuescaling{
  ..    mimageScaling = new QFutureWatcher(this);
  mimageScaling->setFuture(QtConcurrent::mapped(mImageList, scaledImage));
  ..
  }
  
  Image scaledImage(QString file_name) {
     QImage qImage;
     bb::ImageData imageData(bb::PixelFormat::RGBA_Premultiplied, qImage.width(),
    qImage.height());  // causes error
    return imageData;
  }
  

  Anyone know what the problem is or how to work around?

  Thanks for point out the bb:ImageData.  Never noticed the incompatibility.  Image converts ImageData to initialization, so it does not create an error.  However, if I return an ImageData rather than the Image it does not crash.  I then simply convert ImageData of Image in the UI thread and it works very well.

  I'm curious to know why I can return a blank image and I can return an imageData, but I can't go back an Image that's been converted from ImageData.  Do not understand what can or cannot be done outside the UI thread.