Remove the node from the Cluster
Hello, I followed Metalink Doc-ID 466975.1 vip remains online, but how do I remove vip entrance? I work with 10.2.0.4 version.Thanks in advance!
Looks like the entrance is not excluded from OCR.
Use crsctl unregister command to remove it from the OCR.
Also take a backup of the OCR prior to this operation.
Concerning
Rajesh
Tags: Database
Similar Questions
-
Remove the cluster of clusters table
Hi I have this program where you have an array of clusters and when you press a Boolean 'Add' button, you can add clusters to the table up to a certain limit, and it is written in a spreadsheet file. I would like also to such a function when you click on 'Remove' Boolean you can remove the cluster from the table so that the new table takes place 1 old and cluster information are removed from the worksheet so file. How can I do?
It does not need to have the cluster, use instead to build table (for best performance initialize the array and use replaces primitive subset of table). You cannot delete items in a file, but you can read the file and remove the item and he write to the file. If it is a sub VI, you add/remove items and writing to a file each time that the sub vi is called? Do not write to the spreadsheet VI file in this case, use instead write to text file primitive. See examples of LabVIEW for some useful examples on file i/o.
-
Syntax of use YES to remove a node from the RAC
Hello
In reference to the Oracle documentation on the deletion of a node of RAC environment, it showed two syntaxes
In one, he used CLUSTER_NODES = "' and the other 'CLUSTER_NODES = {rac2}'"-- syntax one ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES={rac2}" –local -- syntax two runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME CLUSTER_NODES="" –local
They are both correct? Made the CLUSTER_NODES = "" means the current node is affected? "
Thanks in advance.to remove a node, follow the steps
1 remove ASM Instance
srvctl stop asm - n
srvctl remove asm - n
RM - r $ORACLE__BASE/adfflin / + ASM
RM - r $0RACLEJOME/dbs / * ASM *.Finally, delete all the entries in the/etc/oratab ASM. These entries have the prefix + ASM
perform the backup of your rock when you have completed this
operating mode.2 remove the listening process
As the Oracle user, on any node in the cluster, run the netcaOn the Configuration page, select the Cluster configuration and click next to open the Active
Nodes page.On the page of the active nodes, select the node that you want to remove and click next to display the home
page.On the homepage, select listener configuration and click next to open the page of the listener.
On the page of receiver, this time select Remove and click next to open the Select listening port page.
On the Select listening port page, specify the listener to remove.
The NETCA will stop the listener daemon and remove the content of $TNS_ADMIN/listener. ORA
3 remove the software from Oracle database
On the node that you remove, log in as user oracle and
come on in ' cd $ORACLE_HOME/Yes/bin '.
. / runlnstaller - updateNodeList ORACLE_HOME = $ORACLE_HOME CLUSTER_NODES = ""-local "
Start the YES program and delete the Oracle Home
CD $ORACLE_HQME/Yes/bin
. / runlnstallerThe YES homepage will be displayed again. Click on uninstall the products and inventory
dialog box will be displayed.4. update inventories on the remaining hosts
. / runlnstaller - updateNodeList ORACLE_H0ME = $0RACLE_H0ME "J0DES CLUSTER is ud1 UD2".
5 remove the Configuration of the specific node Interface
racgons remove_config
: 6 turn off the Applications Oracle Clusterware
local sharedvar sharedhome rootdelete.sh
7 remove the node from the OCR
Delete the Oracle cluster node and update the OCR using the $CRS_HOME/install/rootdeletenode. sh script.
8 remove the Oracle Clusterware software
. / runlnstaller - updateNodeList 0RACLE_H0ME = $CRS_H0ME CLUSTERNODES = ""-local CRS = true "
9. check the deletion of nodes using CLUVFY
cluvfy model crs n all the
-
remove the Cluster data store data store
I have an infrastructure with vCenter and ESXi 4 5.5 I have a data cluster store in SAN with 8 Mon, I need to remove 3 Lun (to be used for other purposes) what is the appropriate procedure
to remove the Lun (end then to destroy)? Thank you
Do you want the LUN to use for purpose of non-vSphere? If so, you can just storage vMotion virtual machines since associated LUN data warehouses that you want to decommission (or simply putting the data store in maintenance mode, in this way, that the virtual machines will automatically be migrated). Cleaning after the data store, move the data store from the cluster data store, and then delete the VMware environment data store as described here: best practices: how to properly remove a unit number logic of a host ESX - VMware vSphere Blog - VMware Blogs
-
Remove the cluster 2 to another cluster
I am trying to inspect a thread and if it contains a cluster, then pull the cluster and treat it separately from the original cluster. Help on this would be greatly appreciated.
_Vince wrote:
After taking a step back and looking at the bigger picture,... First of all, I want to make a data table in a cluster, send the cluster added to a vi that takes the names and values to, and then treat the data table differently. It is the basic action that I want to do, and then if there is another cluster in the first group that I wanted to extract and deal with it, as I first asked.
Attached, is an example of what I'm trying to do.
Fine thanks
Vince
You were so close.
Ben
-
Hi all
I need to know if I remove a host in the cluster without put in maintenance mode will be the virtual machine to run.
Thank you
You are welcome.. You can mark the thread as answered?
-
Remove the data of the data cluster store store
I'm trying to disassemble a data store that is part of a cluster of data store. Needless to say that the system does not just let go without me to jump through a bunch of hoops first. Anyone can point me to documentation that describes the steps that I need to go by?
No virtual machine is in the data store - it's good, that there are no virtual machines on the data store
The data store is not part of a group of data store - I want to remove from the cluster. How do I do that?
The datatstore is not managed by the DRS storage - I figured this out. I temporarily disabled DRS on the cluster storage.
Storage i/o control is disabled for this data store - how can I do this?
The data store is not used to the pulsations of vSphere HA - how can I turn off / suspend the heartbeat?
Thanks in advance.You can remove the cluster data store by dragging in your data center through the vSphere client.
You can disable IGCS through a host in the configuration-> storage tab.
You can disable HA heartbeat by disabling HA on your cluster hosts. Usually when you receive this warning, it means that the data store is always used by something. Try first the first 2 options and then try to remove before disabling HA on your cluster.
This should fix the problem on removing.
-
Cannot run rootdeletenode to remove a node is no longer in force
Hello. We have a node RAC 4 nodes (11.1.0.7.0) 11g on RHEL 4. We do NOT use ASM. Shortly before, after that system administrators have finished running OS maintenace requiring the DB to be down, one of the four DB server nodes would not come (i. e. would not initialize back). In the short term, the entire DB server has been lost and is not recoverable. During the discussions on the opportunity to bring a new server online to replace, management decided it was ok with just having 3 knots.
So, I was instructed to remove the node 4th of our cluster registry. I did this action before but never when a DB server has been completely 'cleared '. Therefore, I can not:
-remove the instance on the node to be deleted as the server is gone
-remove the listener on the node to be deleted for the same reason
-Impossible to delete the node shape the DB on the node is broken
What I did is:
-update of the inventory on the 3 survivors nodes via the command "updateNodeList".
-executed racgons remove_config existing command on the node (ss)
My next step was to run the rootdeletenode.sh (rootdeletenode xyz, 4script outside the CRS/installation HOME directory on the nodes exist as user root. When I try to do, I get the following error:
The database is always configured on node xyz.
Delete the instance of database using srvctl or DBCA before removing the node
This error does not surprise me, but I don't have access to that server to DB as it is completely unusable. Anyone have any suggestions on how to work around this problem?
Thank you.
MattHello
See more notice to MOSSteps to remove the Cluster node when the node goes down Due to failure of OS/Hardware and can not start [466975.1 ID] *.
Salman
-
Host cannot communicate with all other nodes in the cluster virtual SAN allowed
I get this error after you apply the latest patch:- http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2135115
So all the hosts are now review: VMware ESXi, 6.0.0 3380124
After the reboot, I get the error message on the host cannot communicate with all other nodes in the cluster active virtual san...
However, the VSAN health check is green, 'get esxcli vsan cluster' shows all 6 members of the cluster ok... and if I reboot a crowd happens ok without the error... so if I reboot another host, it will come without the error... but then the host on which I rebooted before it displayed the error...? So I can't ever get more than 1 host without the error after a reboot.
I checked multicast that removes ok, in fact all of the checks in contradiction with the fact that why I get this error...
Someone at - it ideas? Could this be the latest patch...
Paul...
Hello, this has been repeated here: 6.0 U1b - hosts cannot communicate thanks, Zach.
-
Removing servers still have the cluster database and agent status 'pending '.
Enterprise Manager 12.1.0.2
We have recently decommissioned 3 servers that were part of a cluster. Servers and their agents are gone.
Em, I deleted the nodes in the cluster, removed the hosts and all of its objects.
A node is gone, two left.
I have 'cluster of databases' which show the status pending.
I have 2 principles that show too inaccessible.
I tried to delete these courses, which all but no luck. Any suggestions?
This code still works?
Start
mgmt_admin.cleanup_agent('agentname:port'); commit;
-mgmt_admin.delete_target_internal ('agentname', 'official'); commit;
end;
-
Hello
We are in the process to migrate our 10.2.0.4 db to 11.2.0.3 and discovered a problem with one of our requests - basically, extract us from the text of a node as a number and if this node consists of a space only, he is now back a 0 in 11.2.0.3 rather than the NULL value, it allows to return to 10.2.0.4 (and earlier versions).
Here are examples I've worked with:
select extract(xmltype('<root><test> </test></root>'), '/root/test/text()').getnumberval() from dual;
I raised a SR with Oracle, due to the difference in the behavior of our 10 g database, but in the meantime, I need to work around this problem. If there's an orderly way to remove the whitespace node text? I would rather have to convert the xmltype to a clob to do a replacement, or the extraction of the node as text and then cut and replace and converted to a number, if possible.select extract(xmltype('<root><test> </test></root>'), '/root/test/text()').getnumberval() from dual;
Hello
I can reproduce the 'new' behavior on 10.2.0.5 too:
SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for 64-bit Windows: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select extract(xmltype('
'), '/root/test/text()').getnumberval() as result 3 from dual; RESULT ---------- 02 On 11.2.0.3, if you can invest time in refactoring, I would say that rather use you no deprecated features:
SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select xmlcast( 2 xmlquery('normalize-space(/root/test)' 3 passing xmltype('
') 5 returning content 6 ) 7 as number 8 ) as result 9 from dual ; RESULT ---------- SQL> select xmlcast( 2 xmlquery('normalize-space(/root/test)' 3 passing xmltype('4 ') 4 returning content 5 ) 6 as number 7 ) as result 8 from dual ; RESULT ---------- 123123 -
Hello world
I wonder if there is another similar Powershell script that can determine the currently active node of an MSCS?
What follows is done on VBScript
strClusterWMINameString = "winmgmts:\\ExchangeServerCluster01\root\cimv2" Set objWMISvc = GetObject( strClusterWMINameString ) Set colItems = objWMISvc.ExecQuery( "Select * from Win32_ComputerSystem", , 48 ) For Each objItem in colItems strComputerName = objItem.Name WScript.Echo "The Cluster " & strClusterWMINameString & " active node is " & strComputerName Next
Any kind of help is appreciated.
Thank you.
In PowerShell, you can do this with:
(Get-WmiObject Win32_ComputerSystem - SIEXCLU01 of the computer). Name
Best regards, Robert
-
Dear adobe experts,
I have a requirement to remove a node in the XML interface of a form of adobe (not only by removing a subform in the form). It must be a deletion, an empty node does not work (I read this in another post).
The XML structure looks like this:
< ITEM >
< DATA >
< ROW_IID > 0 < / ROW_IID >
< PARENT > 0 < / PARENT >
< CHILD > 0 < / CHILD >
< / DATA >
< DATA >
< ROW_IID > 1 < / ROW_IID >
< PARENT > 0 < / PARENT >
< CHILD > 0 < / CHILD >
< / DATA >
< / ITEM >
I want to, for example, to remove the second node of data including the underlying elements: row_iid, parent & child. Already tried: xfa.record.nodes.remove (oRemoveNode); I got it from http://partners.adobe.com/public/developer/en/xml/Adobe_XML_Form_Object_Model_Reference.pd f and several messages in this forum, but I get the following message appears in the error console: remove failed. I know that the somexpression is correct.
Here's the code I used to try to remove the node.
var node_loc;
var del_node;
[node_loc = ' xfa.record.ELEMENT.DATA [1 '];
del_node = xfa.resolveNode (node_loc);
xfa.record.Nodes.Remove (del_node);
Anyone know what I am doing wrong?
Kind regards
Niels
Hi Steve,.
I fixed it myself. I adjusted my code a little, so the node, including the elements is successfully deleted.
Here is the way that I fixed it:
var node_loc;
var del_node;
[node_loc = ' xfa.record.ELEMENT.DATA [1 '];
del_node = xfa.resolveNode (node_loc);
xfa.record.ELEMENT.nodes.remove (del_node);
Thanks for the help!
Kind regards
Niels
-
Recently, I received an avalanche of emails with malicious attachments. I have not opened any of the accessories, and my antivirus software has picked up malicious content and removed from the email. Thus, I find myself with an email on my system, no content. Unfortunately, the system does not allow me to then remove the (s) e-mail that is left. How can I remove these 'empty' emails in my Inbox mailbox?
... my antivirus software has picked up malicious content and removed from the email.
Allowing something to edit the database of e-mail will result by it becomes corrupted.
If you use Time Machine, restore the email by "entering Time Machine" of in Mail and choose a time to restore. Then, just delete suspicious e-mails in the usual way. Exit full screen before entering Time Machine.
You may not use software "anti-virus" not Apple on a Mac, for this reason and many others. Identify the product you use to get the uninstall instructions.
-
If I install icloud drive in my laptop where all my important data is saved and uninstall the app from my iphone icloud drive, my data is secure?
A couple of things...
-If you have an Apple laptop or desktop, with a software update system, so there is no way to 'install iCloud Drive' to this topic as it is already there as a function of iCloud.
-remove the iCloud (app) drive icon on your iPhone will do nothing.
-If your data is already in iCloud, so rest assured, it is already safe.
-
Erase the historic failure and Data Web site / remove all data from the Web site
This morning after trying to remove the data this morning, except for a 64 KB of the Equipe.fr file have been removed. After browsing more and try erasing again, Equipe.fr 64 KB data would not clear.
I deleted my phone and restored from a backup of the 17/09/2016, cookies/data of a before the browsing session have been restored. When I tried to remove them, the process has failed. All sites listed on the Advanced tab are always listed, all showing 0 bytes, but the list will not erase completely.
Since I already deleted and restored, I don't know what to do next.
iPhone 6 s 128 gb, iOS 10.0.1
I thought about it. On the Advanced tab, I slipped left and deleted individually. Why they would not clear using remove it all works now, I will never understand.
Maybe you are looking for
-
Should I accept updates Java when the default box shows 'NO '?
I have Windows 7 and get a box indicating the Java updates are available. The request to give me control of my computer in Java, but the default choice is no. Devrais I be accepting updates of Java?
-
I need XP Tablet edition... where can I get iso, or whatever it is?
Anywhere I can xp tablet edition iso? Not trying to promote piracy, I need just an iso and I alreeady have key.
-
After IE get 9? my Japanese IME had problem.
com is dell. Soft is vista Basic. NOW! keyboad is Japanese. I can not type. Please help me somebady! I can't use Windows Mail & Notebook etc...
-
Anyone with a real Playbook ready to test my app? ;-)
Hey guys,. I'm of the Germany, so I'm currently sitting here so that others can download my application when I never test it myself on the real device. Anyone with a Playbook ready to try? You have a great Tilebreaker App for your Playbook for free ;
-
How to sign the code programmatically using c#
My company brought Thawte certificates and wants to code signing application programmatically using c#. However, I couldn't find a solution in the internet. Help...