HDMI has stopped working after the upgrade to windows 8 Pro
Hi all
SOLVED (for me at least)
I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.
IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.
Good luck everybody!
Tags: Windows
Similar Questions
-
All Creative Cloud software has stopped working after the upgrade to Windows 10
So... earlier this week, I upgraded my computer from Windows 8.1 for Windows 10, in which I had installed CC of Photoshop, Illustrator CC and first Pro CC from the creative cloud application, all versions of 2015. They were all working well.
Then, after the upgrade, none of them work. I tried to delete it, follow these instructions: use of the Adobe Creative Cloud cleaning tool to resolve installation issues , but no progress.
I have error message seems to be exactly the same as in this post: Adobe Illustrator CC 2015 does not launch on Windows Pro 10
But their solution was a reinstallation of the system, which I just can't do it right now.
You may wonder that Windows 10 is the problem, but I did exactly the same thing on my phone 3 weeks ago. And it worked fine! (the only difference is that I had CS6 and after upgrading Windows 10 CC)
Screenshots:
This error happens (right) too, but I accidentally ticked the box "don't show me": ins.png https://forums.adobe.com/servlet/JiveServlet/showImage/2-7823824-798279/AI-CC19-Error-Plug
If it does not work. You can try to uninstall and reinstall Microsoft redistributable packages of 2013 and 2012 versions.
-
Hello
1. I updated my OS from 8.1 for Windows 10. Since then my camera and microphone work stopped.
2. in addition, my model (HP Envy dv7 - 7323 cl) is a support drivers HP for windows 10? Because when I search for drivers on the Hp website and selecting my laptop model gives only two options to download the drivers for Windows 8 and 8.1.I don't know if windows 7 is a good idea?
Thank you
Mazhar
Hello
I found the problem. It wasn't on any Windows 10 or any driver. I recently replaced my laptop screen and everything by replacing the technician missed a small plug to be inserted into the socket near the area of Webcam. And this is responsible for the functionality of microphone and webcam.
Thank you! -
Hi gurus of the Oracle,.
I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe
ggsci.exe has stopped working
If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)
1. stop all processes Ogg
2. has taken the old OGG home backup
3. call the YES program and gave the location of the OGG existing House 11 G
4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.
If someone has solved this problem. Please help me.
Best regards
Jamsher Khan
I strongly suggest to talk to support.
-
Time travel has stopped working after the upgrade to watch OS 3
Hi all
Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing. The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself. I did a cycle power, but to no avail. Does anyone have information?Thank you
RayCome on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.
-
Windows Media Center has stopped working (after the great October Windows Update).
In October, there was a Windows update that broke my Media Center (and THXaudio.exe) I was able to restore and put off the various updates until I recently needed to shut down the computer for a clean material out. Even though I had several valid restore points before the updates available, I was not able to use the system restore (says a file is missing) and also not able to restore all the features.
First of all, I tried different patches of problem I already found online: I used the "sfc/scannow" and it always shows the files that need fixing (but he can't fix them). I tried the system restore (and broke). Deleting the database file does not apply. I even "turned off" WMC and not turned back on - no chance.
Here is the text of the two errors:
Description:
Stopped workingSignature of the problem:
Problem event name: APPCRASH
Application name: ehshell.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bd053
Fault Module name: KERNELBASE.dll
Fault Module Version: 6.1.7600.16385
Timestamp of Module error: 4a5bdfe0
Exception code: e0434f4d
Exception offset: 000000000000aa7d
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 1033Description:
Stopped workingSignature of the problem:
Problem event name: CLR20r3
Signature of the problem 01: thxaudio.exe
Signature of the problem 02: 1.0.6.0
Signature of the problem 03: 4a9f80d2
Signature of the problem 04: Microsoft.VisualBasic
Signature of the problem 05: 8.0.0.0
Signature of the 06 problem: 4a277ad7
Signature of the problem 07: 5 c
Signature of the 08:0 problem
Signature of the problem 09: System.BadImageFormatException
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 1033If necessary, I can post the cbs.log file results.
UPDATE:
I did an upgrade "on the spot" my DVD of Windows 7 and everything is back to normal.
Now, I also have 63 'updated important"weed through, one at a time, to see who can be installed safely, and who eventually was my setup.
-
Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.
Nice day!
My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.
Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.
Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!
In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.
What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.
Thanks in advance!
Solved the problem by reinstalling the operating system.
Thank you!
-
Hello
Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:
I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.
Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.
Kind regards
Andreas Ball
Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...
The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.
Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.
Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.
complete list of supported products and the operating system:
http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382
Renesas Electronics USB 3.0 Host Controller®
http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE
What does this do?This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.
This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.
The products and operating systems (view all...)Model:VPCL213FX/BOperating system:Windows® 7 64-bitIMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.
Important notes - During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights.
- To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding.
- It is strongly recommended that you print these instructions for reference during the installation process.
Download and Installation Instructions - To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding.
- Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference).
- Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation.
- The "User Account Control" screen, click 'yes '.
- On the screen "Select Country", select the country for the installation and then click on "next".
- To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next".
- The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation.
- The "Complete" screen, click on "Finish".
Installation of the Renesas Electronics USB 3.0 host controller is complete.
-
browsers stopped working after the installation of windows 8 pro
I installed the windows 8 pro yesterday and everythign seems to work with the system and applications well, my internet connection is good. For some reason all my browsers like internet explore and google chrome do not work. the integrated internet explore on the start menu of windows 8 is at work, what CA I do to solve this problem?
I have an Hp Office p2-1123w
I found a solution myself, everything you have to do is to update your installation of windows 8, just go to settings and click on update your computer, without modifying your files and follow the instructions on the screen.
-
based on the redirection port has stopped working after the upgrade of Capitan 10.11.3
I have a web service running on a VM (virtualbox VM), which I can access on my mac via 192.168.99.100:8000. The mac itself is tuned to 192.168.1.2. To port 8000, I set up a redirect on the server (Server version 5.0.15 OSX) Web sites pointing to 192.168.99.100:8000. It works, as long as the conscripts of the Mac (even when called from another virtual machine on this mac).
However, redirection fails when you try to access from other computers within the 192.168.x.y space, or when it is called from the internet.
... I add a few comments on what has been checked so far:
-port 8000 is open to the router
-OSX El Capitan (10.11.3) firewall application is disabled in system preferences
-OSX Firewall adaptive server is disabled (using sudo /Applications/Server.app/Contents/ServerRoot/usr/libexec/afctl - X)
-by checking port 8000 canyouseeme.org it is recognized as open
... still, the request never machine made...
-
create use Cup Office to work, but now it has stopped working after I upgraded to Windows 7
It worked fine on my last PC (H/P Vista Home premium) but I bought a new PC with windows 7 and I can't make it work! I tried the "resolved" solution listed in the help section, but this won't work for me. I already know how to reduce the screen and make a "drag and drop" on my homepage, but I really prefer the Cup Office 'create' adds on.
thank you, lige perry
These extensions should always work.
-
Satellite P855 - function keys do not work after the upgrade to Windows 10
Function keys do not work after the upgrade to Windows 10
I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
Anyone know when and if it will be available?
Thank youI'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.
-
My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10. Is there a fix for this yet?
I thought about it. The upgrade to Windows apparently damaged 10 HP SimplePass software. Once I uninstalled and reloaded the program, everything started working.
-
computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8
computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8
You can expect problems from not being able to install to the loss of some functionality. the best you can do is to install using the mode of compatibility or upgrade to cs6.
-
FN keys do not work after the upgrade to Windows 10
Why the FN keyboard does not work after upgrade to Windows 10?
FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...
You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...
Maybe you are looking for
-
I have Firefox installed 37.0.1 on OpenSuse 13.2. I have a proxy server that uses a self-signed certificate, and I tried to add my certificate to the list of authorities and to check all the option displayed to be wz trust no chance. I tried to resta
-
Satellite A210-1AH - USB conflict pci bus controllers resource at startup
Hello I have a Toshiba Satellite A210-1AHmodel without PSAFGE-05X01GDU When I start the laptop after the toshiba logo. The laptop gives the following error: Bus ERROR USB controller resources conflict pci on the motherboardBus: 14, device: 06, functi
-
Restart slideshow from the beginning
I just bought a DPF-VR100. When it is disabled, then it seems to restart the slideshow, everywhere where he stopped the last time. I want to start from the beginning each time. How do I do that? I couldn't find this setting or all instructions in the
-
my pc is very slow on start up so I start usually let run for 10 minutes and then close and restart. It then starts ok but the internet connection is pretty poor, better wi fi adapter would make better
-
Windows Vista Edition Home Premium 64. Windows Update error 80070643.
Hi all!! I have the version above for Vista. When I try to search for updates with Windows Update, he says that there is an element to install, I try to install it, Windows Update stops down and after a few moments, reopes with the error message "Win