Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.

Similar Questions

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• Evy HP dv7 - 7323cl: camera and a Microphone has stopped working after the upgrade to Windows 10

  Hello

  1. I updated my OS from 8.1 for Windows 10. Since then my camera and microphone work stopped.
  
  2. in addition, my model (HP Envy dv7 - 7323 cl) is a support drivers HP for windows 10? Because when I search for drivers on the Hp website and selecting my laptop model gives only two options to download the drivers for Windows 8 and 8.1.

  I don't know if windows 7 is a good idea?

  Thank you

  Mazhar

  Hello
  
  I found the problem. It wasn't on any Windows 10 or any driver.  I recently replaced my laptop screen and everything by replacing the technician missed a small plug to be inserted into the socket near the area of Webcam. And this is responsible for the functionality of microphone and webcam.
  
  Thank you!

• Windows Media Center has stopped working (after the great October Windows Update).

  In October, there was a Windows update that broke my Media Center (and THXaudio.exe) I was able to restore and put off the various updates until I recently needed to shut down the computer for a clean material out.  Even though I had several valid restore points before the updates available, I was not able to use the system restore (says a file is missing) and also not able to restore all the features.

  First of all, I tried different patches of problem I already found online: I used the "sfc/scannow" and it always shows the files that need fixing (but he can't fix them). I tried the system restore (and broke). Deleting the database file does not apply. I even "turned off" WMC and not turned back on - no chance.

  Here is the text of the two errors:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ehshell.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bd053
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bdfe0
  Exception code: e0434f4d
  Exception offset: 000000000000aa7d
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: thxaudio.exe
  Signature of the problem 02: 1.0.6.0
  Signature of the problem 03: 4a9f80d2
  Signature of the problem 04: Microsoft.VisualBasic
  Signature of the problem 05: 8.0.0.0
  Signature of the 06 problem: 4a277ad7
  Signature of the problem 07: 5 c
  Signature of the 08:0 problem
  Signature of the problem 09: System.BadImageFormatException
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  If necessary, I can post the cbs.log file results.

  UPDATE:

  I did an upgrade "on the spot" my DVD of Windows 7 and everything is back to normal.

  Now, I also have 63 'updated important"weed through, one at a time, to see who can be installed safely, and who eventually was my setup.

• All Creative Cloud software has stopped working after the upgrade to Windows 10

  So... earlier this week, I upgraded my computer from Windows 8.1 for Windows 10, in which I had installed CC of Photoshop, Illustrator CC and first Pro CC from the creative cloud application, all versions of 2015. They were all working well.

  Then, after the upgrade, none of them work. I tried to delete it, follow these instructions: use of the Adobe Creative Cloud cleaning tool to resolve installation issues , but no progress.

  I have error message seems to be exactly the same as in this post: Adobe Illustrator CC 2015 does not launch on Windows Pro 10

  But their solution was a reinstallation of the system, which I just can't do it right now.

  You may wonder that Windows 10 is the problem, but I did exactly the same thing on my phone 3 weeks ago. And it worked fine! (the only difference is that I had CS6 and after upgrading Windows 10 CC)

  Screenshots:

  

  

  

  This error happens (right) too, but I accidentally ticked the box "don't show me": ins.png https://forums.adobe.com/servlet/JiveServlet/showImage/2-7823824-798279/AI-CC19-Error-Plug

  If it does not work. You can try to uninstall and reinstall Microsoft redistributable packages of 2013 and 2012 versions.

• The release of portable headphones stopped working after the update of Windows.

  How can I fix this problem without having to restore the system to the previous version, so I did, but the system is boring and insistent.

  Re install the audio drivers. Find them in the support page for the website of the manufacturer of your machine.

  See you soon,.
  Jerry

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

• Pavillion g6: my laptop audio stop working after the installation of window 10

  After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

  Try to update the drivers via windows update or hp support assistant. Headphones work?

• HDTV display has stopped working after the installation of El Capitan

  After the upgrade to El Capitan, the already functional and unproblematic mirroring the display of my iMac OSX for Panasonic HD TV has stopped communicating and the TV screen is blank! There is no options available when you select Preferences / display. No settings have been changed for Mac or TV before too, or after the upgrade!

  Hello Macthewife,

  Thank you for using communities of Apple Support.

  I see after update to El Capitan, you have problems mirroring to a HD TV. I suggest the following article to ensure that it is configured correctly and in the "Get help" section, there are a few suggestions if this does not work properly after installation.

  Use AirPlay to view a video of your Mac on a HDTV

  Best regards.

• Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

  Hi gurus of the Oracle,.

  I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

  ggsci.exe has stopped working

  If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

  1. stop all processes Ogg

  2. has taken the old OGG home backup

  3. call the YES program and gave the location of the OGG existing House 11 G

  4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

  

  If someone has solved this problem. Please help me.

  Best regards

  Jamsher Khan

  I strongly suggest to talk to support.

• Illustrator CC has stopped working (after the last update)...

  Hello

  I get the following message "Illustrator CC has stopped working... "when I now try to run the program. It was only after the new update of the Illustrator. I uninstalled Wacom Cintiq HD 13 from the PC. Has no change.

  Any help please? Thank you.

  --

  Windows 8, Version 6.3 (Build 9600)

  Name of the failing application: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Name of the failed module: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

  Exception code: 0xc0000005

  Offset: 0x000000000013920a

  Process ID vulnerabilities: 0x3d8

  Start time of application vulnerabilities: 0x01cfe32da5a29313

  The failing application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

  Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b

  Faulting full name of the package:

  Hi Sumit,

  Thanks for your quick response.

  No I have not any suitcase software installed. Does jogging but my memory and I got some trial graphic clever plug-ins installed, which had expired recently.

  Uninstalling all these now let Illustrator launch. Therefore, it seems to work.

  I'll install the Wacom tablet program later. I suspect that it will be fine.

  Thank you.

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!