HDX 16, trying to connect wireless laptop to LG SMART TV?

Similar Questions

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• IAM trying to connect my laptop to my TV using a cable video. s, but I can't do now.i once before, but I think that I went somewhere and cloned it .anybody me help please jack

  trying to connect my laptop to my TV can't do it now, I did it once before, but I think that I went somrwhere and cloned it .can sume one help me pleas jack.      E-mail address is removed from the privacy * if we're cut off

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  It will be useful.

• Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

  I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

  All imput would be appreciated.

  Kite_99

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I am trying to connect my laptop to my tv..., inspiron 700 m to vizio vx32l lcd... any help?

  As I said I'm trying to connect my laptop to my tv... for some reason when I plug in the cable out of the blue monitor to TV, it says no signal... I don't know if I am missing a driver or what should I do with my settings... If someone has an idea, please help me! Thank you!

  
  

• Trying to connect my laptop to the internet and I get the message "validation of identity and then it is not connect."

  I'm trying to connect my internet to my laptop but its does not work (it is a new connection). I tried it on my other laptop and password have crossed (the computer on which he worked on had vista). In addition, he worked with other computers in the House. I get a message of identity validation and then it is not connect?

  original title: internet connection failure

  Hello

  Do you mean that you try to connect the wireless access point? Try to install Service pack 3. Also what you can check:
  Click Start-> settings-> network-> right click on your adapter connection-> properties-wireless => select Wireless (tab)-> select your (name) wireless access point->, then select properties-> click on authentication-> uncheck the "802.1 x authentication for this network" click ok on all screens.

  Restart your computer and try to reconnect.

  I hope this helps.

• Trying to connect wireless and I get an error saying: "Unable to validate the identity of the network."

  original title: network connection problem.

  I connected it to my new network wireless with my laptop, the connection of the laptop is unable to validate identity to the network. This connection is working but asking to validate identity. How to configure the connection to the laptop properly.

  Hey Jan Williams,
   
  Try the steps as suggested by "Shawn - Support Engineer" of the next and see if it helps to solve the problem:
   
  Window was not able to finad a certificate for you to connect to the network

• Re: Qosmio G30 - trying to connect laptop to normal TV (not HD tv)

  I have a model 161 G30 and tried to connect the laptop to the TV via s video output. But I have no image.
  Which options should I choose when I press FN + F5 and the other changes do I have to do.

  For TV, I use a SCART / adapter SCART to connect the s-video to the TV and also have the right audio cable coming out of the headphone on the laptop.

  I was told that by connecting the two and then turn them I, by pressing FN + f5, I would get a choice of display options, but I get the normal ones...

  I know that this subject has come up before but after reading everything I was not able to solve my problem
  Thanks to everyone for their help in advance

  Hello

  You use the FN + F5 key combination you must enable port on your TV. I do not know how old the TV is and whose parameters are there but do not forget that the port is enabled or the right channel is chosen (for external devices). I tested this with S-Video and Video cable adapter and it works well. Make sure that you also use proper adjustment of input/output.

  It should work somehow. Play with these settings.

• Help, I'm trying to connect my Dell laptop to a TV.

  Help, I'm trying to connect my laptop Dell to a TV, there is a vga output. I bought a compontent video (y/pb/pr) cord vga. My laptop isn't reconizing any other view. Anyone have an idea how I can solve this problem. My TV does not have a vga connection.

  Help, I'm trying to connect my laptop Dell to a TV, there is a vga output. I bought a compontent video (y/pb/pr) cord vga. My laptop isn't reconizing any other view. Anyone have an idea how I can solve this problem. My TV does not have a vga connection.

  Hello

  see if this information helps you:

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

• tried to connect my computer vaio laptop to my home theatre with a HDMI cable and get great picture on the tv

  Tried to connect my laptop vaio to my home theatre with a HDMI cable to run the windows media player music I get beautiful picture but no sound through home theater just the laptop itself... How do I get sound through home theater too?   It is model # SVE151190X

  Hi woodsman0692,

  To get sound from the HDMI, please activate in sound property.  To do this, press Windows + Q.  That will raise to SEARCH and type in the PANEL.  When Control Panel opens, select SOUND.  When sound property is displayed, right click on AVAMP and on the left, click on SET AS DEFAULT(pic below).  This noise turn sound via HDMI / av receiver system.

  (with plugged hdmi cable)

  

  (without the hdmi cable connected)

  

  Nick-

• All-in-one Deskjet 2540 fails to connect wireless

  This printer worked fine without thread until I installed a new (AT & T U-Verse) Internet connection.  Previously, I had a combination router/DSL that had wireless 2 sources (hi and lo Band).  The printer connected to a wireless network with the SSID of "Rooter" (stupid name, but what the heck).

  When the modem/router has been replaced by the unit of AT & T, I lost a wireless sender (Rooter) so I tried to change the printer another point of wireless access on my local network named "FBI_Van" (another stupid name).  To do this, I used my cell phone which, at the time, was very well connected to FBI_Van.  I loaded the drivers from the printer to the laptop, connected the USB cable and began to install the printer for the new wireless connection.

  Efforts to do this have failed.  In the window "Select one of the available wireless networks" (after using the link "Convert a USB port connected wireless"), I could see my access point 'FBI_Van' very well.  By clicking on the button "use this connection", asked me to enter password WPA_PSK expression, I did.  It's the same EXACT sentence I used to connect wireless laptop.  The green progress bar went to halfway and then I got the error:

  "Cannot locate the SSID that you entered, try again".  I won't be an SSID, I entered a password that the requested software.

  First of all, I was not one who entered the SSID - this is the software that "judge" and I just clicked it.  Second, the password was perfect without error letter.

  Whne I run the wireless network Test results, using the printer itself (button wireless & B & W Print) he told me that the printer has been tirelessly "Rooter" looking for (and not finding).  The blue wireless LED blinking and the "signal strength" LCD is forced.

  So, after this long explanation of events, what can I do to make this printer to accept a new SSID access?

  Is there a way to reset the printer to "factory delivered" settings so I can start over?

  Bill

  To answer my own question.  Is there a way to reset the part of the printer wireless.  It is NOT mentioned in the manual, but here's how do:

  When the printer is on, stop the LED flashing wireless by turning off the wireless.

  Hold the button cancel (the big red 'X') and the wireless button at the same time.

  Wait about 10 seconds until the power light flashes once.

  Go to the computer that you have installed the printer software on and go down the menu to "Printer Setup and software" and click on that

  Press the radio for wireless configuration MANUAL (do not push the button 'connect to the router')

  Follow the screens to select the wireless network you want, click Next

  The password for the connection of input and let the software connect the printer to the network.

  It MUST work, if not, repeat the operation (I got two times)

  Bill

• Impossible to connect the laptop to the TV.

  I'm trying to connect my laptop under Windows 8.1 to my TV (Panasonic TC-P65VT60). Both have Miracast and I have updated all drivers and firmware.

  My laptop sees my TV and I select it. My laptop that you ask the WPS Pin code. My TV never gives me a WPS Pin to get into my laptop.

  I spoke with the support of Panasonic several times and whenever they claim that this is possible with a device Android NOT a PC even if television says it can connect to a PC or smartphone.

  Can someone help me please to make this connection work?

  Hi Ken,

  8.1 Windows comes with standard support Miracast wireless display technology, so you can screen wireless content from your PC Windows 8.1 to devices certified by Miracast as smart TV screen.

  A screen with Miracast wireless projection

  http://Windows.Microsoft.com/en-GB/Windows-8/project-wireless-screen-miracast

  Security is negotiated with Wi - Fi Protected Setup (WPS), secured using WPA2-AES direct communications between the Windows device and the Miracast receiver. For more information, see this Blog:

  8.1 Windows on your big screen with Miracast

  http://blogs.Windows.com/Windows/b/windowsexperience/archive/2013/11/12/Windows-8-1-on-your-big-screen-with-miracast.aspx

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Connect my laptop to TV

  I'm trying to connect my laptop to my TV via a HDMI cable. (Windows vista, intel PC and Sony Bravia HDTV)

  The link seems to work because my desktop wallpaper appears on the TV screen, but nothing else.

  What should I do to get the full content screen displayed on the TV screen.

  Thank you

  PeterJ

  It is shown as an additional screen.  If you take something and drag it to the right side of your laptop screen, it will start to appear on the left side of the TV (it get on TV).

  If you prefer it double, rather than extend, you can hold down the keys on your keyboard as you type P for the desired projection option.

• Im trying to connect an external display, but it will appear on the screen why is that

  After replacing my hard drive I tried to connect my laptop to my external screen I could before and now, just a blue screen on my other screen will not appear, but the laptop still detects

  Update your graphics card driver and try again.

• Problem connecting my laptop XPS15 to my u2412m via displayport monitor

  Hi peoples,

  I just received my new Dell UltraSharp monitor u2412m!

  Now, I'm trying to connect my laptop Dell XPS15 (via its connection mini displayport) to my new monitor via a mini displayport to displayport cable.

  Unfortunately, it does not seem to connect and instantly, the monitor goes in power saving Mode...

  What I'm doing wrong here? Is this compatible/possible in the first place?

  Thank you very much in advance!

  MORIS

  PS. the monitor works instantly with an old laptop with a vga connection... Plug-and-play...

  Try to use another connection - hdmi would be better if the laptop has that. You can use an hdmi cable to dvi - same technology and this work. Those that can be purchased for less $10.