He cannot add to keyword list.

Similar Questions

• After the firmware update, cannot add new reading lists

  I updated from 1.01.29 to 1.01.32 and noticed some changes.

  1. the layout of the directory of the Clip is a little different.  It allows to view the Clip in this framework, "Internal memory" and in this framework, records.  Now it's just the Clip, in this setting, files.

  2. all the songs in the video for the upgrade are not visible in the music folder or any other folder.  They are on the device, because I can play them, and they take place on the Clip.

  3. with the help of WMP11, I added a new reading list for the clip.  The finer transferred playlist songs I can see in the music folder, and the reading list does not appear in the playlists of the music (even if all the playlists of the firware update see the place very well).

  When you upgrade your firmware, the Clip reset USB mode (under settings).  Back to what you had before (PSG?) and you will probably be fine again.

  Note that now, from your description, have a few transferred to your Clip in each of the MTP and MSC modes (before and after the upgrade).  There is nothing wrong with that, except that your computer can only see what's on your Clip the content transferred under USB mode you are currently connected to your computer under.  And so he can that you want to remove your hardware update, redefine your USB mode on what she was before and then transfer to the back matter to your Clip.

• Integration of the NAC Profiler - cannot add list of filters on cam

  Hi all

  I have a problem with the Profiler - integration of the NAC for endpoint profiling.

  Here's the situation:

  I have already created the integration based on the steps in the Guide: Setup Cisco NAC Appliance integration. I think that the configuration is correct, because I can do database synchronization between the Profiler and CAM. Here's the log of server profile:

  NAC_SYNC: Task_Queue_Runner commissioning
  NAC_SYNC: Profiler / END of synchronization of the NAC [add 0, upd 0, desc 0, rm 0]
  NAC_SYNC: Profiler / START the synchronization of the NAC
  INFO: [2010-12-15 11:01:09 (fcapGetHWAddr:49)] is for eth0 MAC

  I have already created a profile of endpoint named "Admin" which is based on the IP address. I also created the NAC events based on endpoint profile 'Admin '.

  The event of the NAC will present 'Admin' profile to a role of the NAC. This event aims to circumvent 'Admin' of the legalisation of the ANC visa so that the "Admin" can connect to the network automatically to a role of the NAC.

  However, when 'Admin' to connect to the network, it still is challanged by NAC. I don't see "Admin" on the filter of the CAM or the list.

  This means that the endpoint profiling is still broken.

  Is there anyone who have experience with this?

  Thanks for the support and comments

  Imad

  Hello

  You cannot add devices manually on the profiler.

  The Profiler has to detect automatically (it is the concept of profiling).

  How this Profiler detects endpoints use the modules of collector.

  Each module has endpoints detection means.

  You will find the description of each collector module here:

  http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_intro231.html#wp1062345.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• In MS SQL Server Management Studio, cannot add a port to the Windows Firewall exceptions list.

  I am trying to debug a sql script in the debugger to MS SQL Server 2008 and I received a message saying 'could not configure the Windows Firewall. Cannot add a port to the Windows Firewall exceptions list. "Use the Panle controls to manually configure Windows Firewall.

  Hi GusGomez,

  The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
   
  Hope this information helps.

• WNDAP360 / WMS5316 - cannot add AP since the firmware

  Hi we have just updated the firmware on our access points (WNDAP360) 2 and cannot add them in the WMS5316 (ProSafe 16ap)

  I tried to perform a reset, it locates the device, but the progress indicator just to 0% with the rotation of graphics. The Web page times out. Ive left it 40 minutes

  I also manually configured on the same subnet, unused IP and tried to add through discovery of intellectual property

  This seems to have happened since the updates of the firmware:

  WMS5316 is on 2.1.5

  WNDAP360 are on 3.0.4.0

  Beforehand, they were always capricious to add like its never been clear what password to use. For reference, Ive tried our internal password that the group is configured for blank password and password password for example.

  I tried adding with new IPs and also the IP existing / default

  Everything I try, I can't do these Aps to add to the group / management system. Here are the recent errors in the system log:

  7 Oct 09:50:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 09:50:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:52:04 LEYWMS01 syslog.info - MARK-

  7 Oct 09:54:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:54:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed the status of success<0> offline: unable to connect to the server<-3>

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:57:07 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:59:10 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed status connection: unable to connect to the server<-3> to success<0>

  7 Oct 10:02:12 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:02:12 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:03:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 17 seconds

  7 Oct 10:05:17 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 19 seconds

  7 Oct 10:06:16 LEYWMS01 user.warn: WARNING: 192.168.0.100/images/product_logo.gif URL has had 184 seconds

  7 Oct 10:06:16 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:07:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:08 LEYWMS01 user.info: access point [ip:192.168.0.100] [model: WNDAP360] added to list managed

  7 Oct 10:09:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:10:19 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 183 seconds

  7 Oct 10:10:19 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:11:22 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:12:04 LEYWMS01 syslog.info - MARK-

  7 Oct 10:13:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:14:21 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:14:21 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:15:20 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:15:50 LEYWMS01 user.err ap_mgr_WNDAP360: can not deal with CPI since Timeout:Timeout has been reached<-4>

  7 Oct 10:17:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 22 seconds

  Now solved

  Had to manually assign an IP address in the same subnet (which had already been done), and then restart the WMS service, then try and add it again. Connection is established and the progress indicator has increased. Several times he has failed when even at 40%-60% and said the authentication has failed. However he did at least change the IP address to the new so something was working.

  I have left alone and returned to him and he said connected. It seems that the synch plant just constantly but ends by develops. Then I changed the password / group, it says failed again and finally himself developed.

  Garbage

• Cannot add the program to enable the WIndows firewall

  I try to install Peachtree Accounting 2011 and firewall Windows gives me a message «firewall WIndows cannot add Peachree accounting 2011»

  to the exceptions list", so I can't install the program.  I tried almost everything.  Not very technologically trained but can follow instructions well.  Thank you

  Here is a fix for this problem:

  Tweaking.com - repair Windows Firewall 2.8.8

  http://www.MajorGeeks.com/files/details/tweaking_com_repair_windows_firewall.html

  I had a customer with the same problem - cannot add programs, and the link above has solved the problem.

• Cannot add Contacts Windows Live Mail rule

  I'm trying to implement the rules of e-mail in Windows Live Mail on Windows 7 computer. I would first of all a folder to retrieve messages from all my Contacts (i.e. real people) and another to retrieve messages from organizations, I am interested in / attached to but whose email I have to see every day.

  Have implemented a rule, I cannot add Contacts, even if it seems that I should be able to. Specifically, I'm trying to set up a rule to sort mail "when the line contains people". In the box "Select individuals", the statement is to "enter one name at a time and click Add, or select the names of your Windows Live Contacts" HOWEVER, we don't know don't not how to select the names of the Contacts. When I click on the Contacts button, I just get a list of Contacts but can't copy and add names to the mailbox rules.

  I'm not typing one by one. I need help.

  Thank you.

  While in the message rule, click the Contacts button and then double-click a Contact , and click Add. That should add to the rule.
   

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• Cannot add contacts for the 'To' and 'cc' Box when sending emails

  Original title: emails

  cannot add contacts to the area "to" or "cc" box when sending mail that I only get the option to add addresses to a small drop-down list when I click in these boxes. I tried to uninstall the application and reinstall but made no difference!

  If you click on the "To", "Cc" or "Bcc" once he frequently gives you used, click New and , it gives you the complete list.  You can switch backwards between them by clicking on

  
  

  A more permanent solution   For Outlook

  Gear
  Several e-mail settings
  Customize Outlook
  Advanced Privacy settings
  AutoComplete suggestions
  Give suggestions for anyone I contacted (contacts and non-contacts)
  Save

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• Cannot add content "model of development" in the edition of model

  Hello
  
  I created a new template and I am trying to add a custom navigation (created by me only) in this model.
  When I'm clicking on "add content", I get only the options below:
  
  Alerts and updates
  Analytics
  Content management
  Mash-Ups
  Surveys
  Portlets
  Social and Communication
  Tagging and research
  Web development
  
  I get no option to add the created Navigation.
  I get also on console error below:
  
  < 18 July 2012 15:52:30 IST > < WARNING > < oracle.webcenter.webcenterapp.internal.
  model > < BEA-000000 > < Exception while getting the value of the parameter for pg_pageTemplate
  ID in PageDef: / pageDefs/oracle/webcenter/siteresources/scopedMD/s39012866_e610_
  47a5_8313_bd7e2309f6bb, siteTemplate, gsr5e003700_2b09_4c2a_95e1_e296414c7bfe, Cont
  ainerPageDef.xml, Exception: oracle.mds.core.MetadataNotFoundException: MDS-00013
  : no metadata found for the metadata object ' / pageDefs/oracle/webcenter/siteresource.
  s/scopedMD/s39012866_e610_47a5_8313_bd7e2309f6bb/siteTemplate/gsr5e003700_2b09_4
  c2a_95e1_e296414c7bfe/ContainerPageDef.Xml">
  < 18 July 2012 15:52:30 IST > < Info > < oracle.webcenter.framework.resource.extern
  Al. GenericRequest > < BEA-000000 > < RESOURCEURI: HttpServletRequest.getScheme = http >
  
  < 18 July 2012 15:52:31 IST > < WARNING > < oracle.webcenter.webcenterapp.internal.
  model > < BEA-000000 > < Exception while getting the value of the parameter for pg_pageTemplate
  ID in PageDef: / pageDefs/oracle/webcenter/siteresources/scopedMD/s39012866_e610_
  47a5_8313_bd7e2309f6bb, siteTemplate, gsr5e003700_2b09_4c2a_95e1_e296414c7bfe, Cont
  ainerPageDef.xml, Exception: oracle.mds.core.MetadataNotFoundException: MDS-00013
  : no metadata found for the metadata object ' / pageDefs/oracle/webcenter/siteresource.
  s/scopedMD/s39012866_e610_47a5_8313_bd7e2309f6bb/siteTemplate/gsr5e003700_2b09_4
  c2a_95e1_e296414c7bfe/ContainerPageDef.Xml">
  < 18 July 2012 15:52:31 IST > < Info > < oracle.webcenter.framework.resource.extern
  Al. GenericRequest > < BEA-000000 > < RESOURCEURI: HttpServletRequest.getScheme = http >
  
  Can anyone provide any input on that?
  
  TIA
  Amrita

  Hi Amrita,

  You cannot add the navigation model directly modeled on the author's page, but you can add style of navigation (tree, menu, tab etc.) for the default navigation in the catalog of resources. Once you add navigation style on your page template, you can then change the default navigation for another model of navigation model by using the following steps:-

  1. in the properties of the component: tree Navigation dialog, click the settings tab.
  2. in the Navigation drop-down list, select your Navigation model.

  I hope this has answered your question.

  Kind regards
  Imran

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• How to recover bookmarks - cannot add, restore files or import even after restarting the pc and remove reinstall Firefox?

  Bookmarks have disappeared. Cannot add new bookmarks, import from another browser, open the previous bookmarks file. I tried the solutions in Help and troubleshooting without success. CCleaner doesn't work anymore when it comes to Firefox. I've used this for years with the problem. Everything else seems to work.

  Problem solved by synchronizing with my cell phone. None of the solutions in "Help" has solved the problem. CCleaner now work again.