OfficeJet 4650: Adapt to the size of the whole of a remote application problems

Similar Questions

• OfficeJet 4650: Extension of the tray will not extend

  Hi all

  I recently bought an OfficeJet 4650. After printing the first time, I pushed the tray, and now it will not come back.

  Any advice or fixes?

  Thank you

  Ty

  Welcome @ty_warman,

• OfficeJet Pro 8610: Get the Permission of HPeprint or security problem error

  I used printing wireless for several months successfully to print from my work computer, but am now able to print to the e-mail address provided.

  The error reads 'your message was not delivered because of a permission or a security problem.  It may have been rejected by a moderatory, the address can only accept email from certain senders, or another restriction to prevent any delivery.

  The Organization rejected your message: hpeprint.com. »

  I've reconfigured my printer to my router.  Any suggestions?

  Hey @LoreeW,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you have a few problems with ePrint using your HP Officejet Pro 8610 e-all-in-one printer.  I want to help you with this.

  I recommend that you first check your printer to verify its intact ePrint connection:

  • Touch the icon (webservices)
  • If you see an address @hpeprint.com, I recommend that you try to send a test ePrint from a different email domain than what you use on your work computer.  If it prints correctly, we can rule out your printer as being a factor in this particular issue.  If your printer's Web services is enabled is more, re - enable.  Any problem would occur with this, click here to access another relevant post I created.  Scroll to my suggestion re: setting a manual DNS as this tends to help by allowing the webservices where fail the normal steps.

  If you were able to send your printer work ePrint of any e-mail domain other than the one you use at work, read on.  Click here to see an HP ePrint article that focuses on the various factors that can contribute jobs ePrint not printing not.  Note that some areas of corporate email may become incompatible with ePrint due to the presence of a digital signature in the outgoing message template.  EPrint jobs you send work meet these criteria?

  Please let me know the result of your troubleshooting by responding to this post.  Thanks again for reaching out in the Forums - we are always happy to help you.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Apex 4.0 to 4.1 on the new server migration translated application problem

  Hello
  
  I have a translated application works well on an apex 4.0 Server and want to upgrade to 4.1 using a new server.
  
  I did what I do normally, export schema and application, and then import the schema and the applications on the new server.
  
  This does not work for the main application, but it does not work for the translated application.
  
  If I run the application right after having established import, changes to the login pages between two languages that I use, but when you try to connect with the second language, it gives me the following error (112 is the main language and 113 is the translated application)

  Error     Error processing authentication.
            ORA-06550: line 2, column 37: PLS-00103: Encountered the symbol ".113" when expecting one of the following: ( ; is with authid as cluster order using external deterministic parallel_enable pipelined The symbol ".113" was ignored.

  If I have "seeds" and then "publish" the application in the menu of globalisation so the second language does not work at all (it continues to display the main language in the selection of the translated application).
  
  I went through a lot of threads and it seems to a problem with the translated applications.
  
  Is there a valid way to make the translated application work for this migration?
  
  Teo

  Hello Teo,

  export your 4.0 system XLIFF file development. Also, make sure you import your application with the same application id in the 4.1, otherwise all the internal IDS will move.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• OfficeJet 4650: Can not scan to e-mail on Officejet 4650

  Hello

  I don't seem to be able to download the scan for app by email to my Officejet 4650. Is the problem that the printer is not compatible with this application? Other apps seem to work OK, but I really want to be able to analyze and then send the file directly from the printer rather than using another device.

  Grateful for any advice.

  Hello

  Scanning to email app is not compatible with your printer indeed.

  Scanning to email app can be added in HPConnected for printers equipped with a color touchscreen, no printer with a monochrome screen like the Officejet 4650.

  Kind regards

  Shlomi

• OfficeJet 4650: Officejet 4650 autodial

  I am told that the OfficeJet 4650 to enter the names and numbers of fax for purposes of automatic numbering. Cannot find how to do this in the manual or by pressing the printer options.  Exactly how one enters this information?

  Hello

  On the touch Control Panel Fax , then press Send Now.

  In this screen, tap the phone book () to manage and use the speed dial list

• OfficeJet 4650: Printing photos

  Printer does not photo paper in the main tray.  Receive in message paper with more than 20 sheets in the main tray.  Printer recognizes the same amount of letter paper and prints well.

  Welcome to the HP community @Taji,

  I read your post on your OfficeJet 4650 photo paper in tray paper do not recognize, and I want to help you solve your problem today.

  Here is a link that includes steps and suggestions on how to print on paper using the HP OfficeJet 4650. Try the steps in this document and let me know if you are having problems or get the error codes.

  All-in-one HP OfficeJet 4650 series - printing on HP Photo paper

  I hope this helps and good luck with your printer.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP OfficeJet 4500 G510-m: set a wireless adapter in the port of my HP OfficeJet 4500 G510-M Ethernet

  Hello, a recent update of fiber in my house left me without an Ethernet cable to my HP OfficeJet 4500 G510-M.

  Can I connect a wireless adapter to the ethernet port on the printer?  I could use the USB connection, attach it to a computer and share the printer to the network.  I thought to fix a wireless to the printer adapter would give me the most flexibility.

  Thoughts?

  Thank you

  Dan

  Hello @tarfy58,

  Welcome to the forums of HP.

  I understand that you are looking for alternative methods to put your Officejet 4500 G510-M on your network.

  I would like to help.

  Unfortunately the printers firmware would not know what to do with the wireless adapter.

  You would need something like HP 1200w NFC/Wireless Mobile Print accessory.

  The only downside is that I saw the Officejet 4500 on the list of supported printers.

  Please check the specs of the device, in case I missed it.

  Your method the most effective would be to use the USB connection, attach it to a computer,

  and share the printer to the network.

• HP OfficeJet 4650: How should I treat the error Code 0 x 80240017?

  Tried to install an update and received this error code.

  The steps of troubleshooting in the post here by @Rainbow7000 can help solve the error 0 x 80240015 after an update on your Officejet 4650 printer.

• OfficeJet 4650: Biased Image of the scanned document

  During the analysis of the image produced by the scan my documents is biased on the new page... a little as the document I wanted to analyze somehow go slightly twisted during the scanning process.   Y at - it a setting or fix I can do to help my scanned images is more aligned on the page?

  Hi @TalusHiker,

  Welcome to the HP Support forum.

  I understand that you use a printer all-in-one HP OfficeJet 4650 with a Windows Vista computer and analysis the scanned document is slightly asymmetrical. I would like to help with that.

  In order for me to propose a proper resolution, it can help to collect a little more information from you.

  You scan the automatic feeder (ADF) of Document, or the glass dish?

  The scan seem asymmetrical when you look at it on your computer, or when it is printed?

  Is the pages in a separate document or part of a book?

  I'll watch for your reply, so I can go into it for you. Just reply to your convenience.

  Thank you.

• THE IMAGE (OR ANY DOCUMENT) CANNOT ADAPT TO THE PAPER SIZE

  I use Windows 7 and the printer HP Deskjet 2130 Series. I want to print and the image of the computer and may not hold the paper (I use A4 paper). Whatever the application, I used to print (Photoshop, windows itself, & corel draw) it cannot always adapt to the paper size.

  Please help me. I encounter this problem twice, one is also pending. And I put the image the easier to read my problem. Thank you very much.

  

  For you to change the paper size, see the image below.

  

  If 21 x 30 is not listed, you can select A4 in the list.

  Make sure the paper in your printer is correctly set as it would have an impact on the way that print you the photos.

  Let us know if you have any other questions.

• Is there any way to "adapt to the size of the image" a bin of clips?

  I run a 1920 x 1080 doc project in first Pro CC with a range of sizes and types of media.  I purposely do NOT preset preference "default scale to the size of the image" to maintain the quality of my still image data base to allow pans and zooms.  I imported since, connected and sub cut a very large number of 720 x 486 QT stock of archive films.  After doing without presetting of the first scaling by default, I am experiencing now to apply "scale to the size of the image" to each edition in my sequence that I work.  Is there any way to "adapt to the size of the image" my bin of clips? or am I now stuck having to convert the original movies to 720 x 486 QT 1920 x 1080 and then reissue of links in first to keep all my data void cutting?

  What is in the bin, select the clip, remonter back towards the top of the screen and next to file and editing, select Clip

  Then go down to video Options

  Choose scale to the size of the image

  who do you want?

• OfficeJet 4650: New HP Officejet 4650 cannot be detected in the wireless

  Have tried to install this printer with the 8.1 Windows wireless configuration wizard and Windows 10, and none of them can detect this printer on the same network. Manually enter that IP address of the wizard is not working too.

  I also changed the printer IP of the DHCP server to static, same thing.

  The only way it can detect the printer is through windows 'Add a device' where it appears a list of the devices in which 2 printers named with "Direct-*-4650". "» Not sure one to choose. Choose anyone of them will allow you to connect to this printer once. Next time, this printer can print either.

  An observation is for Officejet 4650, he cannot be crazy; Unlike my other Deskjet 3050 a, its IP address is to ping requests.

  Run the printer doctor tool too, and just, it freezes and sucks CPU forever without getting anything in return. What tool joke.

  Please help me if possible.

  Thank you

  Just return to the issue with the solution. After working with HP support, we discovered the root cause. At home, I used extensions of TP-Link powerline to basic wireless network and ending up with 4 more wireless relay networks that are all on the same subnet and masks. Home, the devices are connected to different networks wireless in places and they have no problem to connect to each other.

  However, this printer 4650, if the Setup program on one basis other than directly connected to the router network, it will be inaccessible. It can be reached from the core network; and all devices on other networks can reach it after that. Another printer, HP 3040 A, has no question also and can be installed on any network.

  Seems a limitation of 4650 printer!

• Mobile watch G3 using and using firefox. The fonts are not reinvest/wraping to adapt to the screen while increasing fonts.

  I use hand G3 mobile with android in browser firefox web. Fonts are reinvesting / wraping to adapt to the screen while increasing the size of the font. The same functionality was available when I am using mobile watch E3. But I think that's not mobile dependent feature. I'm missing a few settings.

  reflow on zooming option can be disabled. Try to toggle this option.

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Search browser.zoom.reflowonzoom

• OfficeJet 6500 only prints the top of the page

  Have a problem with getting my Officejet 6500 to print the entire page.  Top of the body impression seems to be running on the top of the page, as if the paper was not inserted enough away early in the cycle of printing.  Became "paper mismatch" error message briefly, but that does not appear now.  To check the installation of the printer for proper paper size (8.5 "x 11").  Was printing normally until recently.  Uninstalled and reinstalled HP web page software.  Any suggestions?

  Problem seems to be resolved!

  The printing Assembly that fits into the back of the unit was not completely seated.  There is no warning generated unit that the Assembly was not in place, just erratic behavior and various messages like "out of paper" and jamming of paper.  I recommend that if you are having similar problems, that you check carefully that the back print Assembly is properly inserted into the machine.

  Kind regards

  sciencediver