He has not worked, when I downloaded the ldt asks competing twice...

Similar Questions

• my wireless does not work when I download the update for Windows Vista (KB2753842) security

  After an automatic download of Windows security update my wireless card did not work. He could not find a wireless networks that she normally

  the fact. When I used a LAN cable I internet connection.
  When I did a system restore to exclude the update of Windows my wireless card security worked perfectly.
  The same thing has just happened and once again had to do a system restore to get a wireless internet network connection. I can only assume that the Windows Security Update for Windows Vista (KB2753842) is the problem.
  Please indicate if this update is critical and if this is the case, what can I do to make sure my wireless card working?
  Thank you.
  Roy

  Thank you very much for your answer.

  I have now solved the problem by using the network connection software to diagnose and repair the problem. My wireless network now works with the update in question.

  Kind regards

  Roy.

  Hi royhorrobin,

  Please report the problem to the Microsoft Community Forum.

  We will help you solve the problem.

   

  1. What is the brand and model of the computer?

  2. do you get an error message?

   

   

  We would like to tell you that this is a critical update...

  Find information here:

  http://support.Microsoft.com/kb/2753842

  Here are some steps that you can follow:

   

  Method 1:

  Step 1: Restore the system to the United Nations-isntall the software update.

  Refer

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  Step 2: Put the computer to boot, with warning...

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

   

  Step 3: Download and install the update manually to the clean boot.

  Method 2:

  Try to update the Wireless driver and check to see if the same problem happens.

  a. click on start
  b. right click on computer
  c. click Properties
  d. click on Device Manager on the left hand side

  e. in the list of hardware categories, find the device you want to update, and then double-click the device name.
  f. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   

  
  Method 3:
  Also, try the steps from the link below:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows
   
  Hope above methods solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

• Flex app does not work when moved from the original location

  I'm doing a gallery of images in flex. It works when I run it in Flex Builder perfectly fine. Files html and swf works perfectly well open in any browser too, but ONLY when these files and all related files are open to the default location where the application has been generated in bin-debug folder. When I export a generation to another folder, the swf file loads but no other information from the display of the xml file. I tried to set all paths reference files (that is, the xml language) in the flex application to the absolute exact location on the server, and it did not work when I downloaded it on the server.

  I tried several approaches from scratch and they all arrive at the same question. I work with a teaching for Flex Builder License, I'm not sure if they jip you on those and ruin the compiled swf.

  Help, please! I'm losing my mind on that. I think it has to do with something else, in addition to the code because it works fine when I click 'Run', but if someone thinks it is helps for the zip code let me know.

  Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:

  Project - Properties - Flex Compiler - additional compiler arguments:

  Add - use-network = true, and then recompile and post back to the server, should work fine.

  Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.

  If this post answers your question or assistance, please mark it as such.

• I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  The serial number of the computer has nothing to do with the product key for Windows.

  What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

  You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

• How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?

  How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?

  Please try the following steps.

  1. Manager of tasks opened gently and then close process and relaunch LR
  • Creative Cloud.exe
  • Adobe CEF Helper.exe
  • Service.exe Office Adobe
  • AdobeIPCBroker.exe
  • Adobe Installer.exe
  • AdobeUpdateService.exe
  • AdobeServiceInstaller.exe
  • CreativeCloud (URIHandler) .exe
  • AAM updates Notifier.exe
  • CCLibrary.exe
  • node.exe
  • CoreSync.exe

  4: If this does not work please remove Cloud Creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  Hello

  Do you use the WebHelp for the CHM converter script? If so, this screenshot may seem reasonable. If this is not the case, this isn't out CHM.

• Adobe muse website not updated when I download the catalyst

  Adobe muse website not updated when I download the catalyst @.

  Try refreshing your browser after uploading to Business Catalyst. You can see the site of the memory of your browser.

• NotifyIcon() does not work when integrated into the application (.exe)

  Hey everybody,

  I use the NotifyIcon() of System.Windows.Forms.dll (.NET 2.0) to create a menu for the handling of an application. I started work with the example shown here http://zone.ni.com/devzone/cda/epd/p/id/3915and the code works when running in the IDE of LabVIEW.

  However, when I build the code in an executable file, the icon not during execution. Someone has an idea of what could be the problem?

  My code is still very messy (still in try-everything-and-see-what-works phase), so I will clean it before returning and detachment.

  For reference, I'm doing a system-tray only monitor for a NI DAQ 6009. Program begins in the system tray and begins to record data. The user can right click to display the main window where he can change the interval plots or update view.

  OK, I got it working!

  It turns out that I had a few errors:

  1. when I copied on the System.Windows.Forms.dll, I also need to copy System.Drawing.dll because I used during the creation of the icon.

  2. I had the .dll files in the build directory, but I forgot to include the icons used by the program.

  It turns out that the NotifyIcon() has been called, but a picture of the icon was never created! So why I couldn't see it...

• the volume button on my computer does not work, when I turn the sound upward just bar falls to zero, no idea?

  can someone me, help the sound icon on the bottom of my scree of the computer doesn't work, when I puch the bar until you get sound on my computer, it just goes back to zero all the time...

  Hi JacquelineStueck,
   
   
  Parameter by default on your computer would be to reduce the volume when inbound communications are detected.
   
  a. change the setting in your control-> Sound-> Communications tab panel ' doing nothing '.
   
  b. click on apply. Click OK.
   
  If this does not help, perform the clean boot in order to identify the request at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Additional reference on:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Windows Mail has stopped working when I close the program

  After using Windows Mail successfully, I close the program by clicking on the cross at the top right and immediately a box appears saying that Windows Mail has stopped working. Then, Windows Mail opens again and can be stopped as usual without the warning that it has stopped working.  How can I prevent the box "Windows has stopped working' appearing and restart the program?

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Solve problems with Windows Mail:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Hope the information is useful.

• The Flash (AS 2) banner link does not work if I download the SWF on my web and you try to add to my Web site.

  It works when I published the swf and html and view it in the browser. Initially the link wasn't working when I published in to HTML and swf, but then I changed the safety of local playback to access network only. If I upload it to my web server via Filezilla then animation of the banners works, but if clicked, goes nowhere more. Any suggestions?

  Code ActionScript 2 that I use:

  {We (Release)}

  getURL ("http://www.example.com', '_blank'");

  }

  There's no problem with your code.

  disable any blocker popup you or try another browser.

• My site does not work when I download on my own Web host, but it's good in the preview or BC. Why?

  I downloaded my site via FTP on my own web hosting and my site is broken. My menus and slideshows don't work, my styles are all absent... everything is shifted to the left. What happened and how can I solve this problem?

  Problems with layout, missing images, interactivity, styles, etc. in the browser are usually caused by one of the 3 things:

  1. You download all files exported by Muse to your webhost. You need to download all the files, including the css, images, and files scripts that Muse exports when you choose file > export as HTML...

     If your site is not properly displayed in the past, you made some changes to the Muse, exported and transferred your files that have changed, and your site doesn't display correctly, download all your files of site again. Even if you have made minor changes to your site, Muse was changes to the files that you are not aware of. Don't forget to download all the files and folders in Muse exports for your site.

  2. You have downloaded the files, but the permissions on files are not set to allow access by the public. See your FTP client's help files for how to set permissions.
  3. You do not have download directory on your host. In many cases, you will have a users directory and a directory for your public facing web pages downloading. This directory is sometimes called public_html, www, html, etc. Consult the documentation for instructions on the appropriate location transfer your files from web hosting site you.

  We have created some documentation on using one-third the FTP client to transfer assets to a site hosted Muse

• Satellite L500-1DT - Webcam does not work when connected to the internet

  The webcam works if I use the camera app or any other program in mode offline, but whenever I go online - for example, testwebcam.com it says cannot find the camera and it's not just this site since when I try to listen on justin.tv he says the same thing.

  I used to listen to a lot, but I can't any more because it has suddenly stopped working.
  I tried to reinstall the drivers and still no luck, any advice?

  Sorry for all the problems with my English D:

  Hello

  > The webcam works if I use the camera or any other program application in offline mode
  This means that the webcam works properly and it s not the problem of webcam software. So reinstalling driver will not help.

  To my knowledge, you must allow access manually to the internet pages or another application in order to use the webcam.
  Have you checked your firewall settings that could prevent access to the webcam?
  Do it!

• Computer error is not supported when you download the Fix It for Windows XP Professional tool

  Hello

  I write a question on behalf of a client. The client tries to download the Fix It tool: http://support.microsoft.com/mats/hardware_device_problems/

  for its hardware problem Windows XP when it has encountered an error that the store does not apply to its system. According to the error current configuration of the computer system is not compatible. Windows XP was purchased from Dell.

  The reason that the client downloaded the tool is because it can not use the TV as a monitor because exclamation point in device for VGA Manager.

  Please help solve us this problem. Thank you.

  Hello

  1. What is the full error message received when installing the tool on the computer fixit?
  2. The problem persists during the installation of any other tool fixit?
  3. Did you the latest changes on the computer?

  For the exclamation mark next to VGA device is the Device Manager I would suggest that you manually download and install the latest driver for graphics card on the computer by visiting the card manufacturer's Web site and see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658