HP Envy 1520t: stuck on the gray screen

Similar Questions

• Envy 15: Stuck on the HP screen

  Good so recently I accidentally leave my laptop ran out of battery. I've loaded and started upward and it's gone through an update of windows then stuck on the loading screen HP during auto restart during this process. All I see is black HP logo and the white dots circling below until after a few seconds the HP logo becomes, but the indirect approach points continue.
  
  I did a hard reset but it changed nothing. I also ran each test system, it won't let me in the menu diagnosis and has passed everyone, including 2 extensive system testing.
  
  Whereas this problem is usually either a broken hard drive or fixed with a hard reset I am at a loss for what to try next. It's a HP Envy 15 with Windows 10 - 64 bit.

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to the type of media you created, then press on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the Windows system restore to return the laptop to a point in time before this problem occurred - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• iMac G3 tray charger stuck on the gray screen with question mark flashing folder

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.

  Valid operation system not found.

  Not only it primer not leave now pressed the C or

  Place the cd in the drive.  power off.  Hold c power key on & while in the startup is underway.
  

  Keys options,

  key option is not supported on tray loading imac g3 333

  In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  It took charger slot, but I think that optional for the bin.  I think that you can upgrade the firmware with 8.6 for trays.

  You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.

  Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:

  Reset-nvram

  Configure default

  Reset-all

  "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »

  http://support.Apple.com/kb/TS1812?viewlocale=en_US

  In the case of the...

  Try taking the battery for 10 minutes.  Put back in the battery.  Fingers crossed. Turn the machine back on.

  How do I eject the cd from the internal drive:

  eject the cd

  List of devices:

  devalias

  List of variables:

  printenv

• El Capitan does not start after a freeze and a forced, bonded stop on the gray screen

  Hi all

  I have a MacBook Pro 17 "late 2011, 2.4 Ghz, 16 GB RAM with OS X El Capitan installed, the latest version with all the updates." A year ago, I've had my Toshiba HDD replaced by Samsung SSD 250 GB SATA III 850 EVO and the Toshiba disk has been moved to CD using LMP disk Doubler Bay, at the same time, I had my RAM went from 8 GB to 16 GB of RAM, I have now. The OS X El Capitan is installed on the SSD. In this configuration, everything worked well, with absolutely no problem whatsoever. Sometimes, I ran disk utility to check both of my hard drives and no problem.

  Unfortunately yesterday, strange things started going. First of all, I noticed some unusual glitches when you browse the internet with Safari. I'll try to describe the best I can because they lasted about 2 seconds, so I don't recall. In any case, all of a sudden, as if half right of my screen has shifted in the middle of the screen and it was wrong and image around was all damaged or distorted but legible. He'll be back to normal when I switched between applications or revealed the office displays the windows of all running applications.

  It was similar to this (below) but much larger.

  

  Then, I continued my work as if nothing had happened, when all of a sudden my mouse pointer disappeared and the system froze completely. It was just totally frozen, the time was not moving and the computer did not react somehow to the keys I pressed. Unable to do anything, I had to press and hold the power button to turn off the computer. After starting it again once I hear the ringtone, I see the gray Apple logo and the loading bar. When the loading bar reaches about 40%, a coloured horizontal line appears (see photo below), then it subsides quickly followed by a black screen, which is quickly followed by a blank grey screen with no Apple logo or the bar loading, just a gray screen Uni, where I'm stuck. The computer turns off by itself after about 15-30 minutes if I leave it like that on the gray black screen.

  The coloured horizontal line:

  http://i.imgur.com/9rzEyc4.jpg

  I can't start in safe mode or recovery mode.

  I CAN only boot single user mode, Apple Hardware Test mode, the boot (by holding the ALT/OPTION key) Manager and verbose mode. Also, I can start on the Internet recovery mode but once the download is complete, it is stuck on the gray screen (gray screen with the Apple logo WITHOUT horizontal line-online quick clear-online stuck on the gray screen black screen)

  After a lot of googling and reading, that's what I've tried so far:

  -' fsck - fy " in single-user mode

  -running Apple Hardware Test and the Apple Hardware Test extended, both are zero problem

  -Reset PRAM and NVRAM, MSC, several times

  -with the help of this guide: https://www.afp548.com/2015/01/14/when-yosemite-has-fallen-and-it-cant-get-up/ in single-user mode: "rm - rf / Volumes/Macintosh\ HD/private/var/db/BootCache * '

  "rm - rf/Volumes/Macintosh\ HD/Library/Caches/com.apple*"

  "defaults write DSBindTimeout HD/Library/Preferences/com.apple.loginwindow.plist Volumes/Macintosh\ - int 10.

  
  

  -in single-user mode: empty the trash

  -in single-user mode: "sudo purge"

  
  

  -in a single user mode: 'exit' or 'reboot'

  
  

  
  

  However, during my fight, I could successfully arrives at the login screen, log in and use my MacBook for some time, about a half hour before the same thing happens, the mouse disappears and the system to freeze completely. I remember that both times where I was able to get to the login screen, it was after I had been in single user mode and typed 'Quit' or 'reboot'.

  The above colorful horizontal line also appears in the single-user mode when I type "exit" AND I am UNABLE to get to the login screen later (photo below). It just goes to the gray white screen. Those two times when I was able to connect to exit single-user mode, the horizontal line colored is NOT appear in single-user mode.

  The horizontal line colored when you exit single-user mode:

  http://i.imgur.com/0tOVEO6.jpg

  
  

  
  

  Here's what I see in Verbose mode:

  http://imgur.com/LJIRyo

  http://imgur.com/4HF4hvJ

  http://imgur.com/uMdHY5Z

  http://imgur.com/WSswHKK

  MacBook Pro repair for graphics issues outreach program

• HP envy: stuck on the black screen

  Hello, so my Hp Envy is stuck on a black screen. It's a screen lit, but it does not load windows. I tried a hard reboot, nothing. I've updated the BIOS and it seemed that nothing was happening then loaded windows. My antivirus has been turned off and need to restart the computer now its stuck on the black screen turned on again. Help, please!

  Hi @Jaxibrey,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP ENVY laptop and having starting problems.  Try to make a hard reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. You may need to consider a few days before that the issue that has happened.

  Here is a link to computer does not start for Windows.

  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• First Elements 14 stuck on the loading screen

  He worked for a month until today. I add a title to my book trailer when it crashed. I tried to open it up and it gets stuck on the loading screen. It makes it never happened: loading ExporterQuickTimehost.pm

  I'm working on a Windows 10 HP Envy laptop.

  Any help would be greatly appreciated.

  Deidre

  Hi pascalou,.

  Can you please tell us what is the amount of memory that the application supports, by checking in the task-> process manager. Also, remember the name of the title which had caused the crash?

  Have you tried to reboot the machine and then try?

  -Odette

• How to block all the videos and ads on all the site as how it is when it shows the gray screen when the flash player needs to be updated

  Hi there please help me. I didn't have this problem until two days ago when the browser updated itself. I have the youtube video downloader add on and always use it. I'm on a data plan and it used to block videos and add ads which I like, but now is not because of the update, I came back to the old version, but it did not help and I downloaded the flash but block it does not work. It makes the slow loading of pages and uses a large amount of data that I tried many things like all the plugins of switching to add it on the menu to activate ever and it doesn't quite work. Before it used to show the gray screen, where it says "the flash player is out of date" on videos and commercials, but he does not do this because of the update so please help me to do it again.

  I solved. On the firefox support page they will give you information about the HTML5 player and they say there that firefox uses it only 38 version before so I'm 36 version and it worked in blocking it as before.

  So its all sort and if everyone wants to do the same thing go to https://ftp.mozilla.org/pub/firefox/releases/ and all previous versions will be there.

• My mouse is stuck on the main screen (add pictures)

  I'm used to 2 monitors, and I want to keep it this way. So I implemented a QUANIX monitor I have via HDMI to my Sprout.

  I have extension success of two monitors. but my mouse cursor is stuck in the main screen of Sprout.

  If I drag a window to the next screen, the window can move to the second monitor. but my mouse cursor is stuck on the first monitor.

  How can I solve it?

  Please help me... T_T

  (You can see in detail through below the images)

  monitor 1: HP all-in-one

  Monitor 2: horizontal HP

  Monitor 3: MON-SIS330 (QNIX QX2400)

  Current value of monitors

  

  captured when dragging a window to the next monitor

  

  I can find the solution to another post. Sprout Service stop and I can't success using extended display.

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• iPad 9.7 Pro stuck on the startup screen.

  My iPad 9.7 Pro is stuck on the start screen. I can force restart it but it still gets stuck on the start screen. Does anyone else have this problem or resolution?

  Use the recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Satellite M50D-A-10Z cannot start, stuck on the Toshiba screen

  Hello

  I tried to install windows 8.1 after computer instalation. After this restart I can not do anything computer stuck on the toshiba screen (8 h), when I tried to turn on and go to the bios by pressing TAB computer stucks on bios Version screen and wont move :(

  Can someone help me! PLS

  To access the BIOS, you must press the F2 key immediately after pressing the power button.
  Is this possible? You can access the BIOS?

  The laptop seems to be sold without a preinstalled OS. How have you installed the Windows 8.1? Have you changed some settings in the BIOS?

• My laptop is stuck on the applications screen

  my laptop is stuck on the applications screen, and none of them will open. Nothing can do with it as the power of the force off the coast.

  Please be so kind and offer some info on your machine and your problem.
  Laptop model?
  Preinstalled operating system?
  What exactly happens when you turn on?
  Since when do you have this problem?

  Have you tried to do something to avoid the problem described?

• Skype is stuck on the loading screen!

  My Skype is stuck on the loading screen! I used to have this problem but I fixed it by reinstalling. I'm on version 7.25 (.0.106) and it does not stop. I have java to work on IE and updated manually.

  What firewall and Antivirus applications are installed on your computer?

• Yoga 2 Pro stuck on the BIOS screen

  Yesterday using my pro, I let the battery run completely. When I went to use the computer today, the computer is stuck on the white screen of lenovo.

  Computer will not configuration options or boot bios enter unless the hard drive is removed. I can run the computer without the pcei HDD when you use a disk external hard usb. Not really sure where to go fron here. I tried to remove the hard disk, booting from a flash drive, then reinstall the pcei reader, but it does appear quite Similarly when searching for it through the command prompt. Thinking I have a bad drive hard, but I am at a loss at the moment

  Yes, I'm guessing that the drive might be bad.

  Try the Secure Boot turn off/on or affecting in the UEFI/Legacy BIOS as well. It might allow you to start an external drive.

  Make sure that the boot order is set to an external start too.

• Sometimes, the Lenovo Y40 gets stuck on the Lenovo screen?

  The Y40 I bought in July sometimes gets stuck on the Lenovo screen where the laoding circle does not appear. It happens only intermittently, but occurs more often after long use (more than 45 minutes). Technical support already tells me to reset the BIOS and restore windows. Do you know the guys from any thing that can cause this problem? Would it be a HARD drive broken or damaged OS? Thank you!

  I've already sent my laptop in for repair. The technical support representative said that it was either a HARD drive or motherboard problem