HP office jet j6450: must have a black and color cartridge into the printer to print?

Similar Questions

• I have an office jet 5610v hp all-in-one and need to set the number of rings on a less number HOW?

  How do you set the number of rings for an office jet 5610v hp?

  Go to your settings on the printer.

  1. go to Fax settings

  2 choose settings fax Basica

  3 choose the RINGS BEFORE ANSWER

• Black ink cartridge made. R there are 3 other color cartridges in the printer. I would use them instead.

  Black ink cartridge made. R there are 3 other color cartridges in the printer. want to use them.

  Hello

  • What is the brand and model of the printer?

  I suggest you to contact the manufacturer of the printer for assistance.

• HP Office Jet G85, new Dell, Windows 8 (and 8.1) - refusal to print

  My G85 will not print for the purchase of a new computer with Windows 8 (later upgraded to 8.1).

  It will display the pages with very little content, as controls.

  However, with something else, the printer will print an inch or two of a page and then goes to error mode, eject the page without printing.   It's almost as if it were a print problem only.

  I did the following:

  • Installed new drivers, including the former pilots of the purge
  • Run print HP and Scan Doctor with the following results:
  • -The first time that I run it, it invariably recognizes the printer but the program crashes during the screen "selected Communication with your product."
  • -After cancellation and re - run 'the doctor', it prints a page with
    GET /DevMgmt/DiscoveryTree.xml HTTO/1.1
    HOST:
    and then finish on the screen "Impression of difficulty".
  • -When you run the "difficulty printing" on the State of the device is gives an unknown error (06) error code.
    I did the printer reset several times without success.
    If I jump the device status screen, the rest of the tests get a green check mark.
  • -If I print a test page, I get variable results.  Sometimes it prints only a line or two from the text of the alphabet at the top, sometimes it prints in color or down bars, and once it appeared to print the entire test (about half a page long) page.
  • I called Dell and spent more than an hour with the tech, redo much of what I described above, with the same results.  The tech said that the printer is "broken".

  The printer was working (and worked) very well with my old computer with XP (fully updated). He has never worked with the new computer and win 8.

  Any help would be greatly appreciated.

  Thank you

  Hello WEBrewer & talw,

  I want to offer you both the information regarding this issue. You can try to perform a cycle power on your printer:

  1. Remove the power cord at the back of the printer while the printer is turned on.
  2. While the power cord is unplugged, press the power button for 20 seconds.
  3. Plug the power cord into the printer and the printer.
  4. Try printing again.

  There is not really much more troubleshooting beyond what you both have already done. All I can recommend is to download and run the HP printer install wizard for Windows. Beyond that, I recommend you to call our technical support to see if they have other options available. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  If you have any other questions, feel free to post back.

  Thank you.

• I have a new color cartridge, but the printer will only print b/w

  Original title: printer

  My color cartridge was low so I replaced my color cartridge.  Although even I have a new color cartridge in my printer does not print in color.

  Hi Paulawagner,

  ·         What operating system is installed on your computer?

  ·         What is the brand and model of the printer?

  ·         Did you do changes on the computer before the show?

  Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.

  First of all, make sure that the color cartridge/toner is not empty or blocked.

  You may have accidentally changed the print options that caused the problem.

  Check out the following articles for more information about changing the printing options, printing a photo, etc.:

  Print a photo

  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

   

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  I hope this helps.

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• I must have hit something and changed how my screen looks like when I open a tab page is real real long or it can be so short, I don't see anything

  original title: screen problems

  I must have hit something and changed the look of my screen
  When I open a tab page is real real long or it can be so short that I can't
  See anything someone can you please tell me how to get my screen to the
  how he was going crazy in New York!

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• Office jet pro 8600 connect with router but not recognized on the network

  I just installed new router e1200 lonksys. JO HP 8600 pro connects with the router, but the printer cannot see 8600. IP 169.254.223.37 on said install ip is the placeholder and printer not connected. have restarted once 1000 and tried to reconnect. New router has OMP and thrust of 3 seconds the button on the router. Also failed to connect on the router definition reviews

  8600 worked fine on the old router. Problem started when I connected the router after that cable modem connected then modem vonage. Previous setting was cable - vonanage and wireless router - all worked well then.

  Also downloaded 8600 new complete software after losing the Wi - Fi connection - please help!

  If the Ethernet cable is plugged into the printer, it will disable the wireless radio.

  If this is not the case in the network menu, network by default.  Then, in the same network menu, run the Wireless Setup Wizard.

  If this does not work, we will come on your new router a bit.

• Irish critical update needed to solve the problem of black and white tv on the G20!

  I recently had trouble with the implementation of the tv on my Qosmio G20, I was directed in the direction of an issue of black and white affecting earlier models. The solution to the problem was to use the drivers of the g20 and run 2 reg files.

  Having done that I tried all combinations Irish possible, with still in black and white without success, I then tried UK and got the color.

  I mucked with the recording files and found that there is no Irish layout in the file, then when a user updates to Ireland as their situation they will always get black and white.

  The Ireland uses the exact same settings for television as in the United Kingdom, however if a person chooses UK they fall outside the Irish guides or Irish to choose channels amongst (Ireland is not part of the United Kingdom)

  I found the settings for the United Kingdom-

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\44]
  @= "United Kingdom".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  Thinking the 44, was the dialing code for the United Kingdom (which took a while to understand), I added an entry to register with exactly the same parameters but with the Ireland and 353 above.

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\353]
  @= "Ireland".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  I now have color tv under the Irish settings in the library, I also make it sound now, where before I didn't. I hope that the code above will add registry files named ttv2_regdata_20050111.reg that comes as part of the correction of pilot http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm to the problem...

  Thanks to jimi in what follows after http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.

  Hope this helps someone...
  laters taters...

  Hi Joseph

  It is very nice to hear that you solved your problem and thanks for the comments!

  Good luck!

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• I installed the software recommended by Microsoft and my printer is not working as it says lxdncoms.exe and lxdrwbgw.exe of the printer driver have been blocked. What should I do?

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:

  The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  What exactly is the software that you have installed?

  Ken Blake, Microsoft MVP

  The software is called RegWork.  I had to pay for it.  It is not yet enabled.  It seems to be just a type of utility to clean my system scan.  Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
  Should I continue to carry out this activation or should I unstall it.

  What makes you think that Microsoft Security Essentials recommended
  It? That cannot be good.

  You must uninstall it. Registry cleaning programs are all snake
  oil. The registry cleaning is not necessary and dangerous. Leave the
  Only registry and do not use any registry cleaner. Despite what a lot
  people think, and try to which suppliers of software record cleaning
  convince you to have used really doesn't hurt registry entries
  you.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.
  Ken Blake, Microsoft MVP

• My 3-in-1 uses the color cartridge for copy/printing black a black paper on the glass top...

  My 3-in-1 uses the color cartridge to black for a black document on copy/printing tray, but use black cartridge to print in black from the computer itself.

  In other words:

  (1) if I have a document with a black print in Microsoft word on my hard drive and I want to print this document in black print, while the 3-in-1 works fine. In other words, is the black cartridge can print a document in black to a black document.

  (2) if I take this same document which has just been printed in black and put one on the glass and try to produce a black document thereof using the copier function, the 3-in-1 uses the color cartridge to produce the black document... .more is very slow (the same speed it would be if I were to produce one side of color of color documents.

  Of course, it cannot be the black cartridge.

  Through a long trial and error process, I got lucky and I resolved and the resolution is not what I was expecting and makes no sense to me.

  Use the settings of the printer itself, I just changed the setting from "automatic" to the "plain" paper and the setting in 'text' value 'None '.

• printing in black and white only on the all-in-one HP Officejet J5780

  I am trying to print page 2 of an article of web in plain black and white.  However, the upper part of the page is red on the web, the main part is black and white only.  No matter how clearly, I insist that I want simple black and white, what I get is the page, printed in red.    The printer does not do what I ask.  How can I fix this?

  Hi daniel199,

  You get the same problem when you try to print from another internet browser?

• Use black ink cartridges into the two slots? HP Photosmart C4795 - no color cc = us

  Can I use black ink cartridges into the two slots? HP Photosmart C4795 - no color, to save money?

  Hey JJ - B,.

  You cannot use a black cartridge in both slots. The print head channels are different for print 3 colors in a slot vs only black print out on each other. Using black in the two slots certaining most will cause errors and possibly damage the printer.

  Is there a reason you want to run the two blacks to be with? You can still print with only the back cartridge installed.

  Good luck!

  Sean

• Basis of dye or pigment black and colors k5400 HP 88

  I would like to know if black and colors is dye or pigmented.

  Thanks in advance for your help.

  Found the answer at: http://www.inkowl.com/index.php?C=10&S=17&B=8&product=1363&p=product

  black pigmented HP 18/88
  ink cyan tinted to HP 18/88
  tinted magenta ink for HP 18/88
  tinted yellow ink for HP 18/88