Headaches: Position of the text changes of body as a screen resolution changes

Similar Questions

• How to change the start position of the text on a custom path

  I don't seem to be able to change the start position of the text on a custom path. I can see the 'X' on the basic line that defines the beginning of the text, but it doesn't seem to be a way to change its position. Among the videos on the Internet suggested that now the CTRL key would allow X to drag along the way - however, if I try that, the path moves rather than the X.

  Steps to reproduce the problem:

  Select text on a custom path tool

  Draw a custom path

  Validate by clicking on the green arrow

  Click path for text insertion tool

  Type text

  Engage

  ... Now try to change the start position of the text.

  Photoshop Elements 10

  Windows XP SP3

  After validating the text you need to click on the path with the type tool (for example next to your first letter), and then by holding down the ctrl key should work.

  Your get the path selection tool.

  In other words without switching tools, just pass your cursor next to the text, then click on when the cursor turns into the i-beam cursor, but you can switch to the type tool as Ken suggest if you find that easier.

• Police base / positioning of the text of point vs box

  For some stupid reason too long to address here, I place some point text in the same place, as it would be placed if it was in text box.

  However, it appears in the text box is positioned compared to the 'first line' of the police, while the sharp text is positioned (anchored) from the baseline of the text, see the next with the same position sample model:

  

  What I've done here is just first create "mypoint" by clicking on (0,0) and paste the text ' "(which contains characters that show the level of reference and full height also), and create the text box"mybox"set by draw a text box to (0,0) to (1 000 100) and paste the same text and by changing the colors to make them recognizable.

  I then just added a rule to y = 100, added an adjustment layer and it value parent of these two layers, then shift the position of the adjustment layer - 100 so I can see what is happening.

  Now the question is, how to calculate what "mypoint" position would be to align on the same alignment of Y-position that the text "mybox" is?

  Just for the inspection of a few things:

  

  Looking at the returned rectangles sourceRectAtTime() I get something in the general direction of the following, but he is not quite right:

  

  model var = app.project.activeItem;

  var b = comp.layer ("mybox");

  var p = comp.layer ("mypoint");

  BR var = p.sourceRectAtTime (0, false);

  PR var = b.sourceRectAtTime (0, false);

  var text = p.sourceText.value; copy settings

  var t2 = comp.layers.addText (text);

  text = t2.sourceText.value;

  text.applyColor = true;

  text.fillColor = [0,1,1]; cyan to differentiate

  T2.sourceText.SetValue (Text);

  T2. Name = "myotherpoint";

  T2.parent = comp.layer("adjust-y");

  T2.position.SetValue ([0, 0]); gives the same position as "mypoint".

  T2.position.SetValue ([0, br.top - pr.top]) / / slightly off

  T2.position.SetValue ([0, text.fontSize]) / / No, too low

  Is it a reasonable way of calculation and this... ?

  I tried to add a point text and to match a text box, with a code similar to yours, and it works.

  However I have no parent the text point to layer "settle there" (because you said nothing on the subject), but directly in the text of the box.

  Start-ups can come from your transformation parameters to "settle there" layer. Maybe reset?

  I used this code:

  var comp = app.project.activeItem;
  var b = comp.layer("mybox");
  var br = b.sourceRectAtTime(0, false);
  
  var p = comp.layers.addText(b.text.sourceText.value.text);
  p.name = "mypoint";
  // make same doc specs (skipped)
  var pr = p.sourceRectAtTime(0, false);
  
  // parent, then set relative position
  p.parent = b;
  p.transform.position.setValue([br.left-pr.left, br.top-pr.top, 0]);
  

  Xavier

  Edit: just realized that 'set the y' is on your screen, and it is the parent of all the layers...

  I don't have a lot of time to understand why your code does not work, but if you parent the point of the box instead of the box parent, then it should work.

• Why the text changes color to enter several terms?

  Hello

  I'm using CS5/Win7.

  I put several labels to create a new text layer for each photo.  I select the text tool, type the word, hold down the SHIFT key, move the cursor to the following location on the photo, release the SHIFT key and type the next word.  Do this 6 times on each photo.

  Sometimes, somehow, and all of a sudden after I move the slider and type a new Word, the color of the text changes leading to the background color.  I can't understand what's different about my movements or the position on the photo - or anything like that.

  What would cause this?  I'm doing that is causing this behavior?

  Thank you
  JL

  I just tried to do whatever you call a dozen times without no color change.

  Notice that the X (not in text edit mode) key fires the colors of foreground and background swatch...  But you didn't say that you see them swap, just that the text is the background color.

  Are all your drivers updated (for example, your display driver)?

  Can you reproduce the problem with reliability?  And if so, Edition - Preferences - Performance, disabling the OpenGL drawing, then by restarting Photoshop changes this?

  -Christmas

• style character or paragraph to the text of my body?

  Which should I use, style of character or paragraph to the text of my body? When I first import text in my document, which should I apply?

  Don't we just cover it with you, or was it someone else?

  Paragraph styles are the first level of formatting and are applied to all the text in a paragraph. They include fonts specifications. Character styles are in 'special' situations where you need to a single character or a word or group of words, to have a feature that has a different shape, the basic text attributes applied in the paragraph style. Character styles can be as simple as changing type of italics, or by adding a line of underscores, regardless of the police, or can include police information that will always force this particular text to be in a certain face, weight, size and even if you reset the paragraph style of the text that surrounds (you could do this for a brand name of the product).

  You don't want to apply a character style to an entire paragraph.

• How to clear the text changes in a PDF Document

  Hello

  I work in Adobe Reader DC and had previously entered several changes in a document via the complete Adobe & signature tool/feature. I need to delete some of the text entered earlier in the document, but when I return to the fill & sign tool or function, it allows only hit me on the text changes / existing.

  My question is this: how to erase or delete previously entered text changes / in a pdf document and enter the new text/changes?  Thanks in advance for your support in this matter.

  Bernd,

  Thanks for the quick response. There are several sections in the document as the required signature and I signed electronically these sections. So I'll assume that since I already signed the document, I can't apply alterations to his text entered correct?

  Thanks again.

• How to get the exact position of the text?

  Hi try the code below, I do not get the exact position of the text.

  TextModel InterfacePtr< ITextModel > (() Utils< IXMLUtils >->QueryTextModel(inXMLElement));

  FrameList InterfacePtr< IFrameList > (textModel->QueryFrameList());

  TextIndex start_pos, end_pos;

  Utils< IXMLUtils > ()->GetElementIndices(inXMLElement, & start_pos, & end_pos);

  Int32 fidx;

  TextFrameColumn InterfacePtr<ITextFrameColumn> (frameList->QueryFrameContaining(start_pos, & fidx));

  UIDRef = focusedText:GetUIDRef(textFrameColumn);

  not signed int current_page = GetPageNumberFromUIDRef(focusedText);

  UID pageUID;

  UIDRef spreadUIDRef = GetPageSpreadUIDRef(current_page, pageUID);

  PMRect PageCoords = GetPagePasteBoardPos(UIDRef(db, pageUID));

  InterfacePtr<IWaxStrand> (((IWaxStrand*) textModel-> waxStrandFrameQueryStrand() kFrameListBoss IID_IWAXSTRAND)));

  if (waxStrandFrame is nil) Break;

  K2: waxIteratorscoped_ptr<IWaxIterator> (waxStrandFrame->NewWaxIterator());

  PMReal PositionY = 0;

  if (waxIterator is nil) Break;

  IWaxLine* waxLine = waxIterator->GetFirstWaxLine(start_pos);

  PositionY = waxLine->GetYPosition();

  Can you suggest a solution for above problem.

  Instead of GetYPosition, try waxLine-> GetToPasteboardMatrix(). Transform(&positionPB); Then you can convert it into page coordinates

• Get the position of the text (inside or outside a nightclub?)

  Hi all

  I use simple Ruby to access the contents of a PDF file. This help PDF Reader of yob of GitHub.

  Now, I've come a long way, but still have a question that remains! How to get the position of a text object (this object area)?

  I read the PDF reference, he told me all sorts of things on the text area, space glyph and user... As English is not my mother tongue, there is a lot to take... I currently have a Community trade mark, a matrix of text and text rendering matrix. I have also all the boxes on the page (media, trim, culture etc..)

  For an Image object, I use the values of e and f CTM as x and y. It works perfectly, but when it comes to text, seems to be missing something...

  Example:

  CTM: Matrix]

  [1, 0, 0].

  [0, -1, 0],

  [-0.0, 640.346, 1]

  ]

  Text matrix = > array]

  [10.0, 0.0, 0].

  [0.0, 10.0, 0].

  [2062769.1732, 42.6732, 1]

  ] == You need to convert the text in user/device space space!

  TRM: Matrix]

  [1000.0, 0.0, 0.0],

  [- 10.0, 0.0, 0.0].

  [2062769.1732, 597.6728, 1.0]

  ]

  I can count the lines and calc a displacement of multipling that number by police in size (e.g. 12 pt), but how can I get the box of you text_object? If I have the box, I can make you whether he fits in a box...

  Please help with what I might hurt, or even better if you can help me to find the position of the text!

  They are NOT the starting point of the text box.   It is the basic position of the pen, taking the place of drawing the text.  The 'box' versus relies on measures of fonts - what you need to get the widths, leader, etc.  There's a picture of this in the ISO 32000-1 standard (section 9.2.4, I think).  In fact, the entire section text will make this clearer.

• Edit event managed by this case in LabVIEW 2013 does not show the specifiers of the event, Event Sources and events on screen resolution 800 x 600

  Edit event managed by this case in LabVIEW 2013 shows not specifiers of the event, Event Sources and events on screen resolution 800 x 600.

  As far as I know, the list of supported resolutions is determined solely by the graphics card. It is possible that one used by the PC supports only 800 x 600 as maximum resolution, even if you plug an external monitor.

  Like Dennis suggested, the recommended option would probably be to develop on another PC and only deploy an executable for the industrial PC. That's what we do with our systems (although not because of this problem, but because it makes sense. There absolutely no need to have the IDE installed in most of our systems).

  Other options:

  1. See if you can get an update of the driver from the manufacturer to solve this problem.
  2. Plug a USB Monitor with its own driver.
  3. Try to hide the taskbar and make the smaller title bar in the hope that the bug manifests.
  4. Try remote access in the PC. I think that some remote access programs allow you to specify custom resolutions that are not affected by the original drivers. Remote Desktop seems to be a likely this option even if it has been awhile since I've used it.
  5. Check the BIOS. I saw at least one industrial PC where there was some settings in the BIOS to control the resolution, but I don't remember the details, and it was quite limited. I think that in this case, you can change the resolution, but then the image does not fill the entire screen.

• Change of position of the text in the text field

  Hello! I've created a few text fields in a PDF form, but I have some problems with the text. The text automatically starts in the middle of the text field, and I want the text to start in the upper left corner of the text box. I can't find the option to solve this problem, anyone know a solution?

  Set as multiline under Properties-Options field.

• Position of the object changes with the new layer

  After Effects CS6 11.0.4.2

  I have installed recent updates, according to this page (FAQ: what information should I provide when you ask a question on this forum?)

  10 Pro 64-bit Windows

  I have an AMD FX (tm) - 8350 eight cores 4 GHz processor

  8 GB RAM

  AMD Radeon 200 series graphics card R9

  3rd party plugins installed: 3-d element.

  I have an object made to 3D element bound to a null object to control its movement. The position that there is everything I like. However, when I add a new layer (layer setting, sound, text or other) changes the position of the null object. It comes to a lot of trouble because I use 3d objects and as they occupy a different position, their movement seems wrong.

  I wanted to add an adjustment layer, so I précomposé just what I have and add the adjustment to the model layer, so it does not change. It worked perfectly. But, now, I want to add a new text object, bring it to feature 3D extrude it and bind it to a null object, the problem is that if I add the null object, or the text layer to the original model, the previous objects will change their position.

  I use phrases such as wiggle and time * with the first null object. This has something to do with that evil?

  How can I solve this problem?

  Thank you

  Yes. The seed of wiggle() and other Pseudo-aleatoires functions is obtained according to the index. You must manually set a seed with seedRandom (< your="" value="" here="">, true) to avoid tampering. This is nothing unusual.

  Mylenium

• The text changes take place after that I click on a tab.

  I have XP and after I updated Firefox to the more recent whenever I click on a different tab of the text above and the small icon to change the location, not much just a little but it's really annoying. I had no such problem with the previous, and it seems rather unusual.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Color of the text changes after loading of hosting provider

  RE: Department of childhood to FUMC-Boerne

  This page has four columns of text. Each column has a title of text set to that color: #4277 A 6

  If you look, titles text for the two right-hand columns appear lighter as if they had either assigned transparency (which they don't), or a value of a different color. I thought it might be behind a layer causing this effect, but it wasn't the cause. To be sure, am I the two columns to the right of the text on the top layer, but the titles are even lighter when displayed in the browser. I use the same A-master for each page of the site. I have not done, but my next recourse is limited to rebuild the page from scratch.

  Everyone knows, or know what could be the cause?

  Thank you very much!

  Did you use a paragraph style for formatting the titles? Using styles ensures the formatting of the headings is identical. It could be that right now, there are subtle differences in the monitoring settings for example. Or the subtle color differences.

  Otherwise:

  1. With the type tool set the text insertion point in the section 'chance music '.
  2. Window > paragraph Styles.
  3. ALT (Win) or Option (Mac), click the new Style button at the bottom of the Panel
     
  4. In the Options of paragraph Style dialog box, type the name of the style. I suggest the title-2, like children at FUMC will be "heading 1".» If you choose "heading 2", then also change the paragraph tag to.

     Subtitle.
     

  5. Click OK and now with the cursor blinking in the section, click the name of the style in the paragraph Styles Panel.
  6. Click in the first section and click on the new name for the style in the paragraph Styles Panel. Repeat this step for all the items that should have the same formatting applied.
  7. Also, make sure that you do not have a character Style applied to the top of the paragraph Style (window > character Styles), if it exists, highlight the text of the heading, then click on [none] in the character Styles Panel to remove it.
  8. With implementing shaped now 100% similar to the four topics, update the site and see if the differences that see you disappear.

  CARI

• Different position of the text when previewing in the browser?

  Hello

  For some reason, some of my objects are in a different position when you preview.  Anyone know why this might be?

  I use CC2014 to Muse on a Mac and the preview by using the latest version of Chrome.  Let me know if you need more information.

  Thank you!

  

  FYI... Design mode in the latest version of Adobe Muse CC (2014.3) uses the same metric fonts such as popular browsers give the text more consistent to the basic positions.

  Abhishek

• Swf load time of the text change

  "" Hello everyone, I work with presenter 9 and I would like to know if we can change the duration of the swf file loading "loading text. I want the text to stay longer on the screen. Is there anyone who knows? Thank you very much. Sylvie

  That text appears for the duration it takes to load the first three blades. If you do the first three largest slides in the file size (add great graphics or video content) then it won't be loading poster screen. You can also create your own screen "loading" as the first slide in the presentation and you would be able to dictate the durration of this slide based on the amount of silence or audio that you place on this slide.