Header to have table "-suite" text on the following Pages

Similar Questions

• "Include the header row in the following Pages" does not work for the table

  Hello

  I use the 8.1.2.3337.1.509884 version.

  Pagnation function "include header line in the following Pages" does not work for any table in my design. (the check box cannot be verified little matter how many times I click it)

  I put such table already in a bodypage flow.

  Any reported similar problem?

  Any suggestions?

  Thank you.

  -Vicky

  The only thing I can think is that your table is not in a subform flowed. Who will stop the check boxes.

• Footer text on the first Page only

  Hi all
  I need assistance with the addition of the text on the first page of my .rtf in the footer only. I searched the forum and I have not found exactly what I'm trying to implement. There is a wire that has

   <?start@first-page:body?>footer text <?end body?>

  but once this syntax is added, I get an error message. My end user want that the text on the first page of the footer, the model may be one of many pages once presented as a preview. Any information or help is appreciated.

  You can use different first page option in ms word, then you will get a single footer on the first page.

  go to your header or footer double click then you go in the upper msword option another first page check only option so that you can get the footer that you need.

  http://winrichman.blogspot.com/2008/08/different-page-header-and-footer.html

• Trying to hide a column but the header reappear on the following pages

  Hi all

  Here is my little problem, I have a table, a bit normal. What I try to do is the following:

  I wish I could hide a full column based on the data. I was actually able to hide a column, but my problem is that when the table breaks into a second page, "header cell" on the second page of the column I hid reappear.

  Here's how I did my stash:

  -In table Initialize script, I check a condition, and if this condition is met, I'm hiding the header cell.

  If (Verif.name4_we.rawValue == "" or Verif.name4_we.isNull) then

  HeaderRow.Cell3.presence = "hidden".

  endif

  -For normal lines, I always check the same exact condition and if the condition is met, I hide the cell.

  If (data. Page1.test.Table1.Verif.name4_we. RawValue == ' ' or data. Page1.test.Table1.Verif.name4_we. IsNull) then

  .its presence $ = "hidden".

  endif

  This facility works pretty well if I only have one page:

  
  5 is my header name (I know it might be confusing, I'm sorry), it's page 1, column 6, and 7 are in fact hidden.

  It's what happens on the following pages:

  
  As you can see, only the header reappear, you can clearly see that the elements are still hidden, but because the header appear, it looks
  as there was a full column.

  Does anyone have an idea of what could be my problem?

  Thank you very much!
  Max

  Are you able to change the width of your columns?

  This is the last trip, I did:

  You must first, double-click the rule to open the palettes of drawing AIDS (or go into the top-> palettes-> drawing AIDS menu) and set the units to Points.

  You need tables and a structure, a table which will show real information and a structure that will be imported into your program with the correct width (column DialogResult.Cancel will have a value of 0.001 in the structure). The structure is hidden in the page layout.

  In your table initialize script, write something like this:

  Set the width of columns by using our structure.//Empty imported have a width of 0.001

  var width = Concat (data. Page1.struct.Col1, "pt."

  data. Page1.struct.col2, "pt."

  data. Page1.struct.col3, "pt."

  data. Page1.struct.COL4, "pt."

  data. Page1.struct.col5, "pt."

  data. Page1.struct.col6, "pt."

  data. Page1.struct.col7, "pt."

  data. Page1.struct.COL8, "pt."

  data. Page1.struct.col9, "pt."

  data. Page1.struct.col10, "pt")

  Table.columnWidths = width

  Explanation: You concatenate each rawValue of your table that contains the width of your columns with "pt" (the unit), in this way, you can set the widths of all columns in a single command (Table.columnWidths = width).

  This should resize the entire column, including the header. (It works on my side)

  Don't bother to ask if you have any other questions

  Max

• PDF form with several auto pages copy text in fields on the following pages

  I created a PDF form with multiple pages. I started with an Illustrator file, then exported to Acrobat to make it complete. For some reason any, however, when users enter text on the first page and try to continue on the other, the text on the first page only auto copies on the following pages. And if you delete what was on the second page (or third) to enter the correct data, which provides information on the first page.

  I guess it must be something that twisted when I was creating the form, so I don't know if there is a way to fix without all over again.

  Thank you!

  Give a unique name to each field. The fields with the same name are copies of each other and will automatically have the same value.

• Is it possible to text on the next page?

  I do a form of sheets of A4 format with repeating field and shape of text to the next page flow/objects. is this possible?  pls help.

  Hi Tangnamofool2,

  It is possible with the following things supported:

  (1) make sure that the subform/Page parent in which you have repeating field has the content value sank

  (2) make sure that the option "allow Page break in content" is checked

  If you have any question, you can send the form to me @ [email protected]

  Thank you

  Kumar

• Enter the text for the form field and do to repeat in the following pages

  Hi - I'm working on an interactive form of 14 pages. There are two text fields that must appear on the bottom of each page.

  Anyone know if it is possible for the user to these fields in competition once and while the text automatically repeat on the following pages?

  I create the form in InDesign CS6 (I CC, but it runs like a turtle).

  Any help much appreciated! Thank you.

  Form fields with the same name will have the same value, so just name them

  Similarly.

  Duplicate a field on several pages is easily achievable in Acrobat, by the way.

  There is a built-in function that allows you to do when you right click on a shape

  in form editing mode.

• The text on the home page that appears smaller than the pages of blog

  Currently I'm trying to hit a few html pages using CSS for my blog.  It is as I have a portfolio of my own work in front of the site corresponding to the appearance of my blog.

  The problem is that I can not the body of the text on the home page to match the body of the text in the blog. For some reason any, it seems smaller, still images line up well on all browsers.

  http://www.movingpictureTV.com -Press 'Moving Picture TV' to see the size of the text change

  Someone at - it a cure?

  you work with em that can be difficult sometimes if you don't pay close attention to the parent controls.

  simple solution in your case.

  In your mptv_styles.css just add make-size: 1.2em; for your #sidebar. This should solve.

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• cannot stop at several new tabs to open boxes at least three every time I have leave and return to the home page or restart Firefox

  cannot stop at several new tabs to open boxes at least three every time I have leave and return to the home page or restart Firefox

  Hi TGreybeard,

  Have you looked at the Knowledge Base article Firefox opens several times empty tabs or windows after clicking on a link ? There is some good information in there that should help you to solve the problem.

  Hope this helps!

• Difficulty to write emails, when I add text, the new text deletes the following.

  When I wrote an email and I want to add text to change a previous entry, the new text deletes the following.

  For example:

  New buildings replacing old buildings in the neighborhood that was built in 1935.

  Water's edge If I want to add the word, say, , in the text, here's what's happening:

  New buildings replacing old buildings in the Lake City ood which was built in 1935.

  You see what happens is the 9 letters in the new Bank word replaced the 9 first of nearbyhood.

  Press the Insert key once. It alternates between inserting and overwriting.
   
  
   
   

• I've updated to LR6.4 today and since then have been unable to import photos.  Always comes the following message is displayed:-certain import operations have not been executed.  The following files were not imported because they could not be read.  I don

  I've updated to LR6.4 today and since then have been unable to import photos.  Always comes the following message is displayed:-certain import operations have not been executed.  The following files were not imported because they could not be read.  I don't change anything, update only.  I rebooted since my Mac Lightroom of uninstalled and reinstalled LR6 but all without success.  Very frustrated!

  Hi lindaw,.

  Looks like that the destination location is not set correctly.

  Make sure the destination in the import window location is set correctly and has full read and write permissions.

  Kind regards

  Claes

• Images with text on the same page in epub seem to be changing color to the export profile

  I create a fixed provision epub heavy photo and I noticed that after exporting, pictures with text on the same page are exported with a totally different and much more saturated look to them.  As if they were exported under a different color profile.

  All pages that include no text but just includes a graphic/photo, the image appears normal in the preview.  I tried several things like manually set two different images to specific color profiles.  I changed the conversion to ensure that everything is export in jpg format.  Cannot quite understand how to solve this problem.

  Has anyone experience this problem?

  He solved.  The problem was caused by blocks of text that had their transparency set to 0%.  Removing those, the problem has been resolved.

• Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Please check layers panel and put in place the menu item in the list, you can use the layers panel and move up or attempt to move the content.

  If there is still the same, then download a few screenshots of the design view.

  Thank you

  Sanjit

• Please help, when I pdf my document to single pages, it's showing a slice about 5mm of width of the following page on the current page. Why?

  Please help, when I pdf my document to single pages, it's showing a slice about 5mm of width of the following page on the current page. Why?

  When you specify an inside bleed on PDF export of a document pages facing, which bleed area is at the edge of the other page in the spread. This is quite normal.

  Most of the time do not need you to bleed inside and it is harmless and can be ignored, or you can set the inside bleed to 0, but if you need a purge of iniside and bleeding object does not continue through the spine, then you must divide the spread and extend the object. "" See InDesignSecrets "Blog Archive" breaking Pages hand to bleed off the coast of a thorn