headphone cable

Similar Questions

• Control of smartphone for MDR headphone cable

  I wonder if it is possible to buy an extra cable / smartphone replacement order headphones MDR - 10R (inline microphone/distance). I looked into parts and accessory store and couldn't find any matches.

  Hello

  Try contacting our parts to 800-488-7669 Department, I have listed the references below for your reference.

  Cable with remote (BLACK) 1-846-820-11

  Cable with remote control (WHITE) 1-846-820-21

• How to use the headphones cable and load on iphone 7?

  I am very interested in th new IPhone but I'm not clear on how couldn't I maintain the main use that I have now with it.

  In many cases, I use my headset while I load the Iphone:

  -audio conversation at the end of the day when the battery is low and he needs to reload

  -When chat or listen to music while using my phone as a modem, with usb cable (otherwise as this function drains the battery quickly impossible)

  Also, I tried to use a Bluetooth headset but frankly I prefer questions from the cable to the battery ones (always unloaded when you have an important conference call) and the sound quality not so good

  So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ? It's the only solution I see, even if painful compared to the current iPhone (risk of losing the adapter, may not be comfortable in a Pocket / may damage the Iphone port...)

  Ulysse311 wrote:

  .. So the question is simple: Apple will offer, for a reasonable price, a lightweight port Doubler ?...

  Hello

  It is a community of support based on the user.

  If you wish to submit comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/iPhone.html

• Satellite L650 - Unrecognized headphones Microphone

  Hello

  On my L650 I try to use a headset, the headset jack is ok, the problem is the microphone jack, when I plug the external microphone, it can not be found in the recording devices only the micro edge arises.

  See you soon
  Gavin

  Hey,.

  Have you tried the headphones on another computer? Just to make sure that the microphone and the headphones cable works properly and doesn't cause this problem.

  I often use the headset on my laptop but it s always recognized as usual. It s listed in the recording devices (right click on the speaker in the taskbar > recording devices).

  But if not a driver update might help in this case. ;)

• At the same time audio playback through speakers and headphones

  When I plug in the headphones the sound plays on both speakers and headphones using Pandora and the music app, as well as during phone calls.

  What brand and type of headphones do you use? There a switch on the headphone cable? It's a Beats Audio headset? If yes try to switch orders online for this problem, because it is a known issue.

• The manual says I can connect speakers or headphones to my headphones Jack (SVF15A1).

  My VAIO SVF15A1 has a headphone jack (I guess that's a tip-ring-ring-sleve SOCKET configuration).  The manual says I can connect speakers or headphones to this Jack, but the speakers and headphones usually have the usual configuration of TRS stereo (less unique ring on the plug).

  I'll damage my laptop by plugging the standard TRS headphone into a HEADPHONE jack?  Remember, headphones and speakers do not have a microphone.

  One web site says that a TRS jack will be short the microphone and the ground, but does not hurt.

  Here is a picture of what I'm trying to describe.  The iPhone headphone cable is similar to the Sony headphone jack configuration

  

• Audio iPhone 7 and high resolution

  Hi-

  Thinking of buying iPhone 7.  I notice that the DAC is now external to the phone for headphones cable good lightning and even lightning to the 3.5 mm adapter contains a small DAC inside.

  What this means that iPhone 7 accepts high resolution audio files? (I'm talking about 24 bits, files of 192,000 kHz with flow rates up to about 9 216 kbps, like the ones you can buy Pono music or other titles HD).

  The Apple store now sells items such as the helmet Planar Audeze with high quality converters.

  Has anyone tried this yet?  It may convince me to upgrade my iPhone 6.  (I currently use one of those Toblerone shaped players Pono for hi res music).

  Hi there, Phlac!

  Thank you for joining the communities Support from Apple! It's a big question about the audio formats supported by iPhone 7. See this link which has the Technical Specifications for iPhone 7.
  
  

  Audio playback

  • Audio formats supported: AAC (8 to 320 Kbps), AAC protected (from iTunes Store), HE - AAC, MP3 (8 to 320 Kbps), MP3 VBR, Dolby Digital (AC-3), Dolby Digital Plus (E-AC-3), Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX +), Apple Lossless, AIFF, and WAV
  • The user configurable maximum volume limit

  Any audio that works perfectly with the iPhone 7 falls in these formats! Have a great day!

• Speakers JBL Xtreme works no not with MBP mid-2010. Any advise?

  Everyone knows the same problem? All solutions?

  I like sound from the loudspeaker (when it works).

  Please, any advice or information would be useful.

  = The ISSUE =.

  Question:

  My JBL Xtreme temporarily (several times a day) stops playing all the sounds of my MPB mid-2010. Requires to completely restart the Xtreme to resume playback.

  
  

  Question is this:

  (1) once the Mac will several minutes without reading sounds.

  (for example, problem will NOT happen 'in the middle' of a video or a song, or between several consecutive videos).

  (2) into two entities (a purchased in 12/03/2015, then replaced by the new JBL 07/05/2016 customer service unit).

  (3) using the two separate cables headphone (2' and 6').

  Issue disappeared:

  (1) temporarily when full restart JBL Extreme (question returns a few hours or minutes later); A full restart of Mac does NOT help.

  (2) when you disconnect from the JBL speaker and plug into speakers of simple (not firmware) separate non - JBL, these speakers JBL - no play the sounds as expected. Thus, Mac 'seems' to send the correct signals via its headphone port.

  Video to reproduce the problem:

  https://Vimeo.com/165709269

  JBL customer service response:

  (1) ' we have not all the comments of any bug or any update would be necessary for the Xtreme. " For now, I would recommend that you contact support for your Mac. »

  But the Mac works well with the JBL - no speakers. So, I think, the Mac is OK. But don't know if its signals is compatible with the firmware on the JBL speakers.

  2) "the speaker goes into sleep mode to save battery".

  But the Xtreme is plugged into the wall power (all 5 white lights are always one of them flashing). So, save the battery life is not a problem.

  It is OK to go to sleep. But it should not require a full reboot to wake up.

  For example, while surfing the web I find and read a video, minutes later I find another video and need to restart the JBL to read.

  As it is, I'm turning it back on about 10 times a day.

  Each time, the Xtreme gives a) unpleasant 'surprise' unpredictable doesn't have to read the sound, b) chime sounds to feed top down and c) not long.

  This isn't a normal acceptable behavior.

  Possible causes:

  I think that, perhaps, JBL Xtreme would have some power save mechanism, so pregnant properly go to sleep (when he gets is not sound signals of Mac for a few minutes). However, when CV, sound signals, JBL Xtreme fails to wake on his own (because some bug in the JBL firmware). Thus, it requires a full restart.

  The question is perhaps only with tones of mid-2010 Mbps?

  Any other cause could explain the symptoms?

  Set up:

  (1) JBL Xtreme is connected to the Mac using telephone head, connected to the power supply plug, the latest version of the firmware 5.8.

  (2) mac Book Pro mid-2010 is running latest OS X (ElCapitan 10.11.4).

  (3) other devices in the House (5 s to iPhone and iPad) have Blue tooth OFF.

  =====================================

  Update: a workaround is to connect through Bluetooth instead of the headphone cable.

• No sound after Skype update

  While signing in to my account, Skype closed and made an update. After the update is complete, I realized that I had no sound Skype at all. I hear anything in Skype calls to notifications. I tried everything I can think of. I checked my sound settings, made sure that Skype was not cut in the mixer, made sure that my volume was set correctly, rebooted my computer and Skype and finally verified online. In the audio settings in Skype, Skype record it sound out, and he said he's going to the right place. Help would be appreciated!

  Solved, it seems that my headphone cable is broken and only allows sounds through, set in her jiggling in making...

• Satellite A100: Vista can't microphone with Skype

  I call on Skype cannot hear me, although I can hear them. Vista doesn't seem to be picking up a microphone. Help appreciated.

  I installed Vista on older Satellite M70 and also Skype. Use the connected external headphone cable and everything works fine. I don't know what the problem is in your case, but check all the options of Skype Sound devices.

• Mac pro, USB keyboard not recognized at startup

  my mac pro (trash) is a wonderful device. Lately, however, it does not recognize a keyboard plugged in USB to start.

  I am at a loss to explain it. I need help.  Advice, anecdotes, guess wild welcome.

  my setup is like this:

  CENTRAL PROCESSING UNIT

  Monitor 27 "Apple (hub)

  Extended keyboard Apple USB

  USB hub (USB2, apparently, that was not what I paid for)

  Wacom Tablet

  Logitec mouse (no driver installed, Logitech *, but the mouse is great he is 15 years old)

  charger for Iphone

  beats headphones cable

  iMic USB audio

  The question seems to have started just after I took my computer to the site, when that happens, I use a keyboard and bluetooth mouse. I immediately told my mac to forget the keyboard and the mouse after bringing it back to the House. didn't let it go, there is no moments where he had 'speed' of any kind. Always moves in a bag built to waterfield.

  Model name: Mac Pro

  Model identifier: MacPro6, 1

  Processor name: Intel 8-Core Xeon E5

  Processor speed: 3 GHz

  Number of processors: 1

  Total number of cores: 8

  (By heart) L2 Cache: 256 KB

  L3 Cache: 25 MB

  Memory: 32 GB

  The system version: OS X 10.11.3 (15 d 21)

  Kernel version: Darwin 15.3.0

  L3 Cache: 25 MB

  Memory: 32 GB

  Based on my experience, your extended keyboard usb from Apple is the oldest plastic or the most recent aluminium? Based on which you have a branch above Apple usb extension cable. Anyway look at the end of the cable usb and it is most likely has that match unusual for her, this little triangle. It can fit on the Mac Pro USB, but can be a little bit loose as an adjustment. If you use a newer Apple usb extension on the older plastic Apple usb keyboard, this isn't a good fit. If you use the old extension of usb Apple on the most recent alum Apple keyboard, which is not a good fit.

  So low line trying to look at the adjustment of the end of the usb in the Mac Pro or hub or ver, you connect to. I got this problem which caused two problems: I was using the older usb Apple with the new Apple alum keyboard extension cable.

  1. frequently the keyboard did not react, looked dead

  2 - beta install for starting seeds would start on the hard drive to complete the installation.

  Given that I have "corrected" the usb extension appropriate keyboard usb Apple alum both problems went away.

• New engine audio speakers are volume levels asymmetrical, even if I double checked all the connections and checked through balances of speaker system preferences. Help, please?

  I have an old desktop iMac to less than 1 year, I've upgraded to El captain of Yosemite.  Just fine, except the quality of the internal speakers.  Yesterday, I received speakers brand new engine audio 5 +.  Hooked by instructions.  Between the speakers volume levels are completely unbalanced. His active in Preferences system - balanced in the Middle, 50-50.  Verified in applications/utilities-audio MIDI output, everything is correctly set.  I can get pay only by the reduction in volume of the speaker on the right to almost nothing, but then I have no more volume than offer the internal speakers.  Any solution would be greatly appreciated.

  You use the audio output from your Mac an entry in your speakers or you cross an external DAC first?

  I also have the A5 speakers +, and I also use their USB D1 DAC which then audio output runs to the speakers.  Yosemite was a constant headache with my setup, but appears to have been eliminated with El Capitan.  I installed OSX to El Capitan, as well as later make a clean-install of El Capitan purely for my wanting a clean and in both cases, the sound system was very good.  Those who speak of fantastic, better that I have owned yet.

  Can you be more specific with how your output of iMac is done?  As usually, always check, then check your connections in your speakers and make sure that the audio cables are intact and not frayed.  If you use the headset, ensure that the headphone cable is robust and doesn't look like not to is damaged/twisted.

  You can consider getting the audio DAC AudioEngine to manage your Mac, as it is much better than one built-in that comes in your iMac.  I use it on my new iMac 5K that I received a few weeks ago.

  http://audioengineusa.com/store/digital-audio-converters/D1-24-bit-DAC

• Two questions. (1) RIP in media player 11 problems. (2) portable speakers do not turn off when the headset is plugged...

  Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update.  The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.

  The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized.  If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.

  Please please help.  I can't be the only one who had this problem.  I removed all anti-virus programs, removed and reinstalled WMP, twice.

  I'd appreciate any help.

  Thank you all

  Carl aka theSTUNG1

  Hi Carl,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a parameter to extract music select "Always".
  a. open Windows Media Player 11.
  b. click Extract, click more options.
  c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
  d. click ok to apply the changes and restart the media player.
  e. check if the problem persists.

  See songs Rip (copy) from a CD to your computer

  Step 2: Make sure the headset is plugged into the socket on the right
  a. connect the headphones to the right sleeve and check the result.
  b. you can also right click on the volume icon and adjust the sound settings.

  See adjust the Volume of the computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Radio song IDing

  I know that some radio stations broadcast information about the current song. I was wondering if this function would be of interest to others as well. Maybe a suggestion to update the firmware?

  RDS would require another piece of hardware: the FM chip.  The downside of RDS is to signal strong so that it works correctly.

  The Sansa uses the headphone cable as FM antenna, which is a factor limiting.

  Execution of several platforms, the e200v2 is certainly the RF (radio) champion, with the best reception.  Thinner sisters are not as good at plucking the radio signals from the Ether, although I find acceptable reception.

  Bob

• Fix of the radio in the next firmware update

  What I'd like is if they could correct the interference with radio, as recording before I start to record the station comes in perfectly but when I start to record that it is almost entirely static.

  The hearing of radio headphone cables work as an antenna. Therefore replace your cables to headphones.

  However recording by virtue will slightly reduce radio level reception - so if the reception is at the limit, record causes of poor quality. It is not in itself a bug.