Headphone Jack got disabled and cannot get it back.

Similar Questions

• I Accedently disable my high definition Audio Device and I cannot get it back

  I Accedently disable my high definition Audio Device and I cannot get it back. IDK what to do but I do not see how to reactivate it.

  Hi MarkRampone,

  Thank you for posting in the Microsoft Community, where you can find all the answers related to Windows. It seems that you have disabled the Audio device high definition and you must activate it.

  In addition to answering these questions that would help us provide a better solution:

  1. How did did you disable the Audio device high definition?

  2. What is the brand and model of the computer you're using?

  Try the steps mentioned in this link and check:

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• I installed Internet Explorer 8 and cannot get an internet connection...

  I installed Internet Explorer 8 and cannot get an internet connection using this program.  However, I get a connection very well when I surfed with Firefox.  I tried to disable the firewall and still no connectivity.  I am connected through a Netgear router with a hard line.  The signal is strong.  When I run a diagnostic on Internet Explorer, I get a message from the bed... WINDOWS CANNOT CONNECT TO THE INTERNET USING HTTP, HTTPS, OR FTP.  THIS IS PROBABLY CAUSED BY THE SETTINGS OF FIREWALL ON THIS COMPUTER.
  CHECK THE SETTINGS OF FIREWALL FOR THE HTTP PORT (80), HTTPS PORT (443) AND FTP PORT (21).
  YOU MAY NEED TO CONTACT YOUR INTERNET SERVICE PROVIDER OR THE MANUFACTURER OF YOUR FIREWALL SOFTWARE.
  No idea how to solve the connection on Internet Explorer?

  run malwarebytes.

  Also, try the following

  1. internet options and click the Connections tab
  2. and then click LAN settings and uncheck everything.
  3. and then click on apply & ok.
  MCP. MCDST. LVL 80

• Error: [810215] MakeDecision method is disabled and cannot be called.

  Hello!

  Odd error here: I am trying to call a method named "MakeDecision" in the Web Designer PersonWantsOrg cutomizer. For a few hours, I get the message "error: [810215] MakeDecision method is disabled and cannot be called. '. I can't explain it to myself, because this call works very well for a long time... anyone have an idea why this message is triggered? Or where I can see the status (?) of the method? Or, which changes the status?

  .. .and Yes, I compiled everything... several times... honestly

  Thank you very much

  Norbert

  Hi Norbert,.

  suggestion:

  Use the method "FillOrder.

  With this you are able to create a new PersonWantsOrg object and can set each property (including the OrderState).

  You must set a PropertyBag object (which contains all the properties for the new object of PersonWantsOrg), you create a new (empty) PersonWantsOrg object and call this method. The PropertyBag object is needed as a parameter to the method.

  Disadvantage: The method works only for execution by a Jobservice.

  That's why I suggest:

  Your "One-button-click" fires an event for the object selected in the PersonWantsOrg.

  You must create a process for this event, this process contains a ScriptExec job. This work calls a script with the following behavior:

  -a single parameter (UID_PWO_Source)

  -load the source object

  -fill in all the important properties of this object in a PropertyBag object, add additional properties (for example OrderState = Assigned)

  -create a new PersonWantsOrg object

  -call the method "FillOrder" for this new object and use the PropertyBag object

  The result is a new PersonWantsOrg object that is finally approved.

  I hope it helps.

  Kind regards

  Steffen

• IPad2 disabled and cannot connect to iTunes to restore

  IPad2 disabled and cannot connect to iTunes to restore

  What happens exactly?  What can't exactly?

  Are you sure that you have iTunes 12.4.1 (current version)?

• My Security Center service is disabled and cannot be restarted.

  My Security Center service is disabled and cannot be restarted

  also windows defender' cannot be found.

  [Moved from Community Participation]

  Hello

  What version of Windows are you using?

  What is the exact message that is shown when you click the 'Activate now' button to the center of the Action?

  Make sure the service is started

  Start > type services.msc

  Double-click the "Security Center" service

  Set it to automatic (delayed start) and click Start.

  What antivirus do you use?

  If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  Microsoft Security Essentials has its own version of Windows Eefender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

• Windows Defender is disabled and I get error 0 x 80070511

  22/08/11: Windows Defender is disabled and I get error 0 x 80070511.  BWStar

  Hi BWStar,

  If the next thread is useful: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/help/f2db3804-1551-461f-9d9b-5d5b5a8e6abd.

  I hope this helps.

  Good luck!

• virus: I struggled with the virus for some time and cannot get rid of them

  I have struggled with the virus for some time and cannot get rid of them. I bought a few programs, but they have also been infected. any suggestions for a really good virus buster.

  Hello

  First of all, an antivirus solution to an already infected system of loading is usually pretty useless. The bug will block all attempts to remove or load what it sees as a threat. Second, without knowing which virus you are affected by, it is difficult to be precise.

  You can take action include:

  (a) work in safe mode, there is much less likely that the virus is able to load and resist actively.

  (b) the safe mode, run utilities malwarebytes.org and AV solution that was installed * before * your infection.

  (c) post is back with a better description of what is on your system to learn more targeted advice.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  Hello Maureen56,

  I understand that you want to connect your TV to your laptop.

  To connect your computer to your TV HDTV using an HDMI cable, follow these steps:

  1. Locate the HDMI port on the back of your TV. It should be more than one, in order to choose the one that is otherwise unused. Note the port on which you choose.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• WiFi on my VAIO SVT13116FXS model after that upgrade to W8 is disabled and cannot depend on

  Since I upgraded my laptop VAIO SVT13116FXS windows 8 and run the tool to upgrade the wireless (wifi) is always disabled and cannot depend on. I tried to run the VAIO smart network, but it does not work.

  Should I go down to W7?

  Hello

  Welcome to the community of Sony.

• I bought 5 Fusion pro and cannot get the VMware Tools to install

  Bought a new iMac and bought Fusion 5 Pro.  I have a 5 year old and reclassified iMac Fusion 4-5 fusion and had no problems.  The new computer is for my wife and I tried and tried to migrate the laptop and it failed every time.  So, I did a clean install of Windows 7 and before I downloaded everything that I installed VMWare Tools.  For the past 2 days, I was passage of the files from the laptop and install programs that she had on the laptop.  Problems with Word and excel as they sit a spin.  Money went to re - install VMware Tools and it launches the installation program and then comes up with an error message... Error 1606: Could Not Access Network Location \\<host>\users\administrator\my documents

  Went into Windows to uninstall VMware tools and he started the uninstall program then stopped and got the same message.  I can not uninstall tools and cannot re - install the tools.  I need help to solve this problem.  I'm a guy of plug-and-play and if there is code to do, in my opinion, I'm sunk.

  Anyone have any ideas on how to solve this problem, so I can get up and go?

  Extra solution after Woodys - please check if mirror folder is enabled or not, if it is enabled, please disable it then try to reinstall the tools.

• Security Center service is disabled and cannot depend on

  My service center security indicates that it is turned off and it wont let me turn it on, how can I turn on?

  Hello jackie,.

  Go to start / Control Panel / Administrative Tools / Services and scroll to Security Center. Click the Dependencies tab and go to each of these dependency services and click dependencies tabs until you have no more. Knit then back and make sure that each listed as a dependency service is enabled and started. Continue along each string until you finally get back to the center of security and make sure that it is enabled and started. Then do exactly the same thing for the Security Accounts Manager service. While in services, also disable and stop the service of the Defender. Restart when done and see if that helps the situation.

  MSE should start automatically in all cases (in normal mode). Even if the Security Center still has a problem, open and try to start the MSE (if it is not already started and running). If so, at least, you're protected even if the Security Center does not have to "prove" to you.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once don't forget to reset the operating system to normal status as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, we will check your system and hard disk for corruption files and try to see if there is an event that will inform you:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well it will complete with no corruption, could not be repaired (if there are these post of corruption here or try to analyze it to find the problem or files using

  http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If it does not, then thanks for posting error messages in Event Viewer about the Security Center (Start / Control Panel / administrative tools / Event Viewer).  Look in the system section.

  If the problem persists, you may be infected.

  Update and run a scan complete with any security software you use.

  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.

  Good luck!

• Trying to get rid of the annoying pop up, I chose deny full screen and "remember" in You Tube and cannot get full screen anywhere or change it back. How?

  I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the solution included hit ' command + I "and so on. How do I do that? What is 'Order' and the letter 'i' or 'L' or the number "!"?

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

• Lost user account password and cannot get into Netbook

  We bought a Toshiba Netbook nb200 for our teenager for Christmas.

  She was so excited to get it and was on the computer immediately implemented its own user account without writing or allowing me the time to create a floppy disk for it.

  Now the user account won't let us. She said she knew what was the password and when we try, it doesn't work. We spent two days by typing everything under the Sun to see if we can get it and no luck.

  2 days after that Christmas and she cannot get into the computer at all.

  I tried SafeMode etc and does not work.

  Any suggestions on what it takes to please?

  Thank you.

  Try this...

  To retrieve the original factory image using the utilities on your computera? s internal disk storage:

  1. make sure that the computer is turned off.

  2. press in and hold the value 0 (zero) key on your keyboard all turn on/off the computer.

  3. If your system offers a choice of Windows® 7 32-bit or 64-bit operating system, you can select one right now. If this is not the case, go to step 4.

  4. a warning screen opens, indicating that when the recovery is performed all data will be deleted and rewritten.

  Click Yes to continue. Follow the instructions to do a full restore...

  HTH,

  The f