Headphone jack on the ThinkPad Edge works not properly with Lenovo 57Y4488 headphones

Similar Questions

• I have a problem with the capture tool works not properly on Windows 8.

  Can I change to automatically let me start to select without clicking on New?

  Original title: snipping tool - work when I start it up, the new button has already been clicked but not at home

  Clarification:

  At work, my computer is Windows 7. At home, it is Windows 8. At work when I start the capture tool I have not hit any other button in order to start the selection of the area I want to Snip. The tool is already gray and my mouse is ready to score my selection.

  At home when I start the capture tool, I get the menu, click on 'New' and THEN I can start my selection - one additional click. It annoys me (I know it's small, but I cut a lot) so I was hoping there was a setting I could change how it starts.

  I know that's not exactly a new topic, but I found that I had the same problem.  I found that the cause of this problem actually comes from OneNote believe it or not.  If you have recently updated your Office Suite and now have the ability of OneNote, all you have to do is to open OneNote and configure.  Once you get it configured you can then select the options that you just press the Windows key + S to be able to cut out a screen shot and you can also set it to copy directly to the Clipboard, then there is no need to tap the new button more in the cutting tool.  Hope this makes sense and helps anyone having the same problems I had.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DELL C2665dnf - the touch screen works not.

  DELL C2665dnf - the touch screen works not.

  How can I get a quote for the replacement of the touch screen?

  Am in need for a screen. Can help me

  Hi Rickellv2,

  You must call Dell technical support or use the chat for your country for information.

• My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  Hello Bonnie,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbd

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem of the intranet: "Firefox doesn't know how to open this address, because the Protocol (k) is not associated with any program."

  Creation of an intranet to a collection of security videos and am linking to a video through a picture icon in the form of:
  < a href = "K: \'link to the movie" > ""
  < /a >

  Overview on the works of IE9, the movie starts when the splash screen is clicked, but in Firefox, I get the alert "Firefox doesn't know how to open this address, because the Protocol (k) is not associated with any program."

  InterLan VLC is the video player by default on the PC. I don't want to put video controls anywhere in the page.

  I code for XHTML 1.1 strict with CSS 2.1, and Firefox 5 handles all of my eccentric styles while IE9 has a few issues, while Firefox is my browser of choice.

  Looking at my Options in Firefox, 'File Windows Media audio/video' is configured to use VLC.exe, so I'm always looking to solve this problem.

  Any Suggestions?

  You must use the Protocol file:// (file:///k:/link_to_movie).
  Easier to see the links to use are to open a file via file > open a file

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• [Solved] Message "Firefox can't open this address, because the Protocol (icyx) is not associated with any program. icyx://stream-16.streamsolutions.co.UK:9102

  Hello
  Firefox doesn't know how to open this address because the Protocol
  (icyx) is not associated with any program.
  This happens when I open a radio station - lmradio.net / and then try to
  play with my Windows media player. All of a sudden, it happened that I had no problem before yesterday.
  My OS is Windows 7 Pro.
  Concerning
  David Rennie

  You install the Orban/Coding Technologies AAC/HE-AAC Player plugin.

  This solves the problem.

• I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."

  What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388

• Impossible to download music - error message reads "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program."

  I bought a song to download from Wal - Mart.com and received the error message when I tried to download the song. "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program." I've never had a problem before. I paid for this download & even I can't access it.

  The site of Wal-Mart offer a plugin or program (Walmart MP3 music downloads) to manage this Protocol?

  See:

  • http://MP3.Walmart.com/store/help/help.htm
  • http://MP3.Walmart.com/store/help/downloading.htm

  On a protocol must be enrolled in a program for Windows that supports this Protocol.

  See also http://kb.mozillazine.org/Register_protocol