heat Pavillion m6 problem

Similar Questions

• Satellite A100 heating and fan problem

  Hello

  I will try to describe my problem in detail because I so hope that it might help!

  I have a 5 years A100-011, Nvidia 7600 Go satellite. Recently, I fixed a display problem that I used to, however, this time (two weeks ago) him comes from the computer laptop back from the workshop with this heating problem. Which is the first time! The problem is the fan.

  When I start the PC, the fan works like it ti be long, maximum for 3-4 seconds. After that the fan barely works! According to me, the air coming out but very very low! less than how it is used for years! I came back to the same place, I corrected the PC. They checked and claim his fine and work! So, I give it a shot and tried the PC.

  Unconsciously, there is problem. Because the temperature of the GPU that has the problem, idling about reaching 60 c (SpeedFan) and goes high (65-67) while surfing the net! And using this way too much for internet!

  What makes it even worst fan always at the same speed very slow! The speed can increase little when he reached 67c!

  In this way, I can not use any high performance program, because the PC becomes more heated then stop.

  Note: I tried the following:
  1-BIOS (latest version) no available fan control
  2 power settings does nothing and there is no option of cooling method
  3 - fan control software. Unfortunately, nothing has worked

  I don't really know what the problem is! Given that the fan works but not all the time and why the GPU gets hot without doing something really serious! What is a cleaning problem? If so, why the fan does not reach its maximum speed at this temperature. !

  I hope I am fine help and answer here!
  PLS help!
  Thank you

  I agree with the user Notepad Akuma is 5 years old and I think that there is a lot of dust and debris inside the cooling modules that prevent fans from running correctly.
  Air can circulate properly and therefore the temperature rises
  So what to do?

  You can use a jet of compressed air to remove dust from the fans that I'm doing this regularly and it helps to clean the fans

• motorcycle g, heating during calls problem

  How can I stop bike g third-generation phone to heat as the iron during a call?
  
  Additional information: 1. He has spent time in motorcycle duringsleep-game.
  
  2. He gave me blister on my face.

  If this happens on all phone calls, I suggest that you go in safe mode and test the call there. If you can't find hot, then you have a rogue application which is causing your problem.

  Please also asked what crystallet. Thank you and I hope this helps

• Heating and noise problem laptop while streaming

  If I open several tabs of youtube. And online streaming. I noticed intense heat under my palm and noise. I also notice jumps high processer in the Task Manager. A couple times my machine stops, too. (probably due to heating of the processor).

  To avoid this situation that I should get more RAM? Currently I have 1 GB. And running Windows 7 on my Lenovo N200 0769.

  Any help or recomendatiosn will be appreciated.

  Thank you.

  Search for dust accumulates on the radiator cooling fins.

  Located under a Panel on the bottom, blow out with

  compressed air or using a soft bristle brush.

  And more ram (2 GB total) can't hurt!

• Laptop HP Pavillion G7: problems of sound after upgrade to win 10

  I have upgraded to Windows Windows 8.1 10 yesterday (August 1, 2015).  The update went well. However, there is no sound on my computer. The sound in the tray icon has a red x and not said: "no speakers or headphones connected," when I pass the mouse over it. I have his AMD Radeon card and I've updated the driver from the site Web of AMD. Despite all the recommended fixes on various forums, including the Microsoft proposals, there is still no sound. I have no sound for any music or video. Appreciate any help. Thank you.

  Wow - sound like you are having a bad time of it with the upgrade.

  If you have a processor AMD APU - which I guess you, like A6, A8 etc.   Usually, AMD has integrated drivers for the video and audio of the computer.  Did you go to the Web of AMD site with your specific APU (integrated CPU and GPU) to see if they have updated drivers for Windows 10?   The manufacturer of your laptop (I guess HP) should also have at them, but HP seems to be asleep at the switch with this version of the OS.

  Check the AMD site and search for your specific APU.  There should be some built-in support for Windows 10 post.  Usually, you simply run the .exe file and it installs everything.  It would be worth it anyway before return you to Windows 8.  And... Yes you can easily restore your latest operating system.

  Here is a link to an article on how to do this:

  http://www.PCAdvisor.co.UK/how-to/Windows/how-downgrade-Windows-10-to-Windows-7-8-3615606/

• Heat Xperia z2 problem

  Hey guys, just ordered ive and xperia z2 read much comments how the camera gets really hot even with the use of a module, any ideas?

  Because the phone has 2 layers of glass it can overheat faster, but that's normal. You are a heavy user, you need to play games, watch videos, networks social navigation etc. It can last up to a day depending on whether applications are large (500 MB + games)

• Win 7 64-bit HP Pavillion DV9500 problems driver base system device.

  So I upgraded my laptop Windows 7 64 bit and I have been able to get everything works except that I have 2 base system devices listed in Device Manager in need of work.  My SN is CNF7415FT1 if that helps any.  I'm not sure what are these 2 devices, as I have not noticed something doesn't work yet.

  What the device is.

  Driver - storage Date Version previous size
  "" Ricoh 5-1 Card Reader Driver 11-2007 3.52.02 has ' Version: 2.99 M

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&product=3255934&lang=en

  The driver is for Win Vista. I don't know if it will install on Windows 7.

• Satellite A210 keyboard problem - Missing letters and generally acting-up

  Model: A210-126 (not relevant since problem seams to affect several models)
  Operating system: OS independent (tried multiple: OpenBSD, Linux, Windows XP, Vista, Win7)

  Other posters with the same problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54917&TSTART=0
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=55560&TSTART=0
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51922&TSTART=30

  Symptom:
  Keys is de-energized or gives wrong output. The problems occurs randomly, either right at startup or after availability. Looks like it's a hardware related issue and not a problem with the OS. The problem occurs in several OS´s and even in the BIOS-meny. None of the solutions posted in this forum / other items solves the problem.

  The battery is not a solution (as suggested in other posts), the problem reoccurs after availability and sometimes even right to restart the computer. (Et laisse le visage, un ordinateur portable sans une batterie est un _stationary_) =)

  No! It's not overheating and heat issue, this problem may occur at startup after a powerdown complete with battery and power removed. (and no, this isn't a problem of dust or a problem of broken / lack of cooling-fans/ventilation)

  I use the lates for my model BIOS, so make a habit/flash-update of the bios to solve the problem.
  Default factory restore is not a solution either, but _différemment_ ive tried, even if this problem most def is a hardware problem.

  All the other solutions suggested by other posters solves the problem (most of them software related bugs in any case).

  Comments:
  The problem started recently enough (ive had this laptop for about a year and a half) and judging by the other posts in this forum seams problem began on the same date/time to a suspect that he is a "calendar/clock" related question... but I'm not an expert and it's just a hunch (would explain why some users may experience a temporary "I solved the problem by changing keyboard-calendar" - euporia until) what they ecounter problem once again after a time of ).

  The problem arises _completely_ radom and under any given the cirumstance...

  Any suggestions?

  > Other posters with the same problem:
  > http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54917&tstart=0
  > http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=55560&tstart=0
  The links that you post are not related to the A210 but L670 laptop model and it was reading about L670 and the problem has been resolved by the BIOS updated

  I have a laptop A210 and this issue never happened to me.
  I installed Win XP, Vista and Win 7 on the Satellite A210 and keyboard is ok.

  You have already updated the BIOS and fact laptop recovery and this didn't help?
  OK, so it seems to be linked to the keyboard and the AEP from Toshiba technician should check what

• Pavillion Q8300 - p6267c: Fans periodically but regularly light up full normal speed on desktop under loads

  I have a desktop computer of p6267c 5 years or more running Windows 7 Home Premium - 64-bit.  He was a great computer with no problems other than a graphics card failed out of the box when it was delivered first, but that was immediately replaced under warranty.

  A little less than a week ago I was using the computer when I thought I might have heard a strange noise light (no rain), and then I heard the fans go on full blast for a few minutes then slow down.  Fans were left like that maybe a handful of times under very heavy load in any of the previous five years.  This time, however, five minutes later and they are back on full blast (very strong and sensitive) once again, for a minute or more then quite new.  This continued to occur regularly even though I was not any kind of important treatment, surfing and normal web documents changes.

  I shut down the computer, turned off and taken to look at the case where I could see that some dust has put up on the vents.  I removed the side cover, cleaned the vents and then little compressed air used for blowing significant dust that had built up inside as well, in various places.  I got to where I couldn't see more dust comes out so I put the cover back and booted up.

  Same fan periodical bursts has occurred.  I was now concerned I might have a virus or malicious software that was causing the CPU to do something extreme every few minutes, even though I see nothing in the Task Manager, so I ran a full scan with Norton.  Came back clean.

  I looked more closely to monitor resources and another program, I had display the temperature of the CPU core and could see that some of the drivers were receiving up to perhaps 25 to 40% of the use and the core, the temperature rose from 60 to 85-90 degrees fahrenheit when fans full blast, then they would go offshore as CPU level dropped and temperature.

  I tried to take off the side cover and have a regular fan box blow a little nearby to make sure there is plenty of air circulation around the chassis, but that made no difference. I was able to look at the fans, and all of them look like they work very well, even at full blast.  The rear fan, the fan on the GPU and the fan on the sink sit directly on the CPU cooling.

  By continuing to use the compueter and look more closely at exactly when fans come on full blast, I think it is especially when there are web video (classified ads or videos on the news sites, sports facilities, etc.).  My understanding is that the CPU in general should do more work with the latter due to the cancellation of video compression and it is the CPU that, not the GPU.  Happens a bit similar, but not as always if there are a lot of pictures on a site.  Also occurs when the computer is first starting or stopping.

  I am now at a loss that suddenly causing this or what to do?  Five years and nothing, now half of websites that I will because of gusts full fans blowing.  The computer seems to be OK otherwise, but I'm afraid that I don't want to damage from excess heat if the problem persists.

  The only thing I can possibly think now is to take off the CPU cooling heatsink and fan, clean more thoroughly and reapply the thermal paste in the hope that it is a bad connection between the processor and heatsink cooling that makes them become hot and have the computer make the only possible choice, telling fans to go at full speed in an attempt to cool everything.  I'm just worried that if it's not her, I am risking possibly destroy my computer just as I've never tried remove a CPU cooling sink and before reconnecting.  So, I don't want to do something that could make matters worse if it is a solution very unlikely.

  Thank you.

  Doug

  Well, I ended up buying a combination of heatsink / fan replacement.  Not exactly the one originally supplied with the computer, but basically the same thing.  The main difference being the new had a record of copper at the bottom where it comes in contact with the CPU, rather than just bare aluminum.

  I removed the old radiator, remove the paste heat, applied new paste again and the new heatsink of heat and all seems OK now.  Blower not more.  Yet once, I don't know how the heat sink went 'wrong', but maybe something broke or the fan is unbalanced, I don't know.

  Fortunately, it looks like it cost me ~ $35 between the new heatsink of heat and thermal paste to fix and maintain your computer.

• R420 chassis due heating controller raid card

  Hello

  We bought 6 Indian dell servers.

  We are facing a problem of severe heat on top of the chassis above the card raid with all these 6 servers.

  the server configuration

  R420 - hexcore single processor 2.2 ghz, 32 GB ram

  Readers 4 x 600 GB 15000 rpm
  (configured as 2 drives in raid 1 + 2 drives in raid 1)

  These servers are placed in a data center - the temperature is around 18 degrees C

  We are facing a severe heating up on problem of the chasiss just above the raid controller

  When the servers are placed one above the other as they are usually placed in a datacenter of the servers heat up between 50, 4-57 degrees celcius

  Support Dell changed the motherboard, raid card, power supply etc. of one of the above servers which is off-production (heating to 50.4 degrees Celsius), but the problem is not resolved

  Thorough review of the raid controller card, I noted that the fins of the radiator on top of map of raid controller - instead of being parallel to the open air is actually perpendicular to the flow of air and is actually trap heat

  the same card in a r.620 server has the fins of the heatsink in parallel to the air flow which remains cool

  has someone else in this forum has noted this and are facing such a heating problem?

  could you please check this and let me know the resolution of this problem

  the heatsink orientation of 90 degrees so that the fins of the radiator are parallel in the open air?

  Thanks for your help

  Rajesh mandon

  Mumbai, India

  indiannic

  
  the dset report displays normal temperatures since it measures the temperature at the entrance (26-28 degrees C) and the temperature of the cpu (57-62 ° c).

  The server works as expected. There is nothing to fix. This has been reported before, and we investigated it. Our generation servers 12 had a massive overhaul with thermal and acoustic design. For this reason, the chassis can become hot to the touch at the back of the system, but it poses no risk to the system components.

  You can change the default fan control to increase the airflow and reduce the temperature of the exhaust gases, but this will increase the use of sound and electricity. Go to the iDRAC - iDRAC settings > thermal. Change the user Option to compensate for fan speed and set the offset of the fan speed to compensate for high fan speed.

  Thank you

• Time transition changes do not

  Hi people,

  Since the last update to iMovie I'm more able to change the duration of transitions between clips. I'm in half way through a project and he threw all my work upward in the air now. I get the same message saying "the clips do not have enough media for the transition." This is despite the clips with more enough heat. This problem has only started happening since the last update. Anyone else having the same problem? any ideas for a fix-by-turn?

  Bravo guys

  Mark

  You must shorten the clip on each side of the transition in order to create a sufficient unused video for the passage to ride.  The question is not how

  the media you have in the clip, but how much unused media (parried back) that you have in the clip.

  This thread may be useful to you, in particular the positions of GeeD. iMovie 10.1.2 precision editor

• Why browsers plant them

  Hello community,

  Recently, I saved an old Macbook 5.1 (13 in 2008) of a parent. The laptop has been abused, dropped enough solidarity to fold the chassis; DVD Player cannot be used or installed replacement. But with the damage he still roared to life, the wonderful thing about the MS Word 2011, General OS operations such as printing, networking, iPhoto, iTunes, email... etc. Using only browsers are originally random diversions and restarts; Sometimes I get the grey screen.

  Mucho Gracias for any info.

  David

  Here's what I got from EtreCheck.

  EtreCheck version: 2.9.10 (261)
  Report generated 2016-03-26 19:21:49
  Download https://etrecheck.com DURATION 02:46 EtreCheck
  Performance: Excellent

  Click the [Support] links to help with non-Apple products. Click the [details] links for more information on this line.

  Problem: Computer restarts Description:
  Random crashing

  Hardware information:
  MacBook (13-inch, aluminum, late 2008)
  [Technical details] - [User Guide] - [warranty & Service] MacBook - model: MacBook5, 1
  1 2 GHz Intel Core 2 Duo CPU: 2 strands
  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0
  OK 2 GB DDR3 1600 MHz

  0/DIMM1 BANK
  OK 2 GB DDR3 1600 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported Wireless: en1: 802.11 a/b/g/n
  Battery: Health = Normal - Cycle count = 1512

  Information on this video:
  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  System software:
  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information:
  Hitachi HTS541612J9SA00 disk0: (120,03 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  [entrenched passage] hd (disk 1) /: 118.82 (free 91,13 GB) encrypted AES XTS unlocked
  Storage of carrots: disk0s2 119.17 GB Online

  If there is any data currently stored on the MacBook, which is not replicated elsewhere, getting backups going.   Right away.   Set up and use Time Machine, or use any other backup tools that you have installed or configured.   Computers and disks fail inevitably and automated and scheduled backups reduces the risk to your data.   Computers that are flaky can be browsed because of hardware problems, too.

  According to Mactracker, memory in this system should be to 1 066 MHz and 1600 MHz.  I would check that.  If it is a quirk in the reports Etrecheck or MacTracker is wrong or bad memory?   I open the access to the DIMMS and check the part number for the memory modules.  Bad memory can and variously will cause problems.   Max memory for this particular configuration was third with 8 GB or 4 GB with memory Apple.  If you are willing to spend money on the Mac and you have verified that it is the bad memory, price then a part of the own memory and are planning to replace it.

  Take a look at the - plant - kernel panics at the end of the report Etrecheck, and see if something obvious or common causes the problem.

  A Mac physically twisted can also have any number of other problems, either a bad connection or a connection that becomes intermittent when heated or the problems that arise when a lot of memory - browsers are known to use a lot of memory - is in use, too.  Swapping the memory cannot solve these accidents, in other words.

• Satellite Pro X 200: how to enable GPU CUDA for BOINC?

  Hi all

  as to use BOINC distributed computing to give my time to laptop for the prediction of climate projects etc.,.
  but need driver NVIDIA GPU based projects 8.15.11.8603, but can't install it, now have 7.15.11.7626, which says vista windows is uptodate...

  I have GEFORCE 8700 M GT, which is supported by NVIDIA for CUDA.

  How to enable CUDA from NVIDIA GPU computing on X 200? CUDA allows access to the GPU of fast algorithms, so as to try.

  BOINC/CUDA link: http://boinc.berkeley.edu/cuda.php

  Anyone successfully updated the driver GEFORCE 8700 to 8.15 version etc.

  Anyone using CUDA on GEFORCE 8700 on Toshiba laptop?

  Grateful for the help/pointers?

  Ilkka Havukkala, Wellington, NZ

  I don't know where you Born this last driver NVIDIA but on NVIDIA page you can find the drivers for graphics used on desktop computers.
  For laptops drivers will be offered by the laptop manufacturers.
  Unfortunately for laptops you cannot find so many updates. Generally each new update offers better performance for graphics operations. On the desktop with good opportunities for cooling, it isn't so problematic but design on mobile units doesn't allow these updates only on desktop computers.

  Heat is a problem common on laptops and the design is the trade-off between performance and physical protection. So do not be surprised if you don't get this latest version of the driver on Toshiba download page.

  Where you found information about the version of the 8.15.11.8603 driver?

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.

• Dv5z laptop

  My son is considering buying this laptop - we are eager to make the move to 64-bit ourselves, do you see any conflict with the configuration? Are there problems common with built-in webcam or fingerprint app?  Comments or suggestions appreciated. There is also an adult on his own, but just ask my opinion.

  • Genuine Windows Vista Home Premium with Service Pack 1 (64-bit)
  • AMD Turion (TM) X 2 Ultra Dual-Core Mobile Processor ZM-82 (2.2 GHz)
  • 4GB DDR2 memory (2 Dimm) system
  Hard drive 160 GB SATA 5400 RPM • hard with Protection for HP ProtectSmart hard drive
  • 256 MB graphics ATI Radeon (TM) HD 3450 card
  • 15.4 "diagonal WSXGA + high-definition HP BrightView Widescreen Display (1680 x 1050)
  • LightScribe SuperMulti 8 X DVD +/-RW with Support Double layer
  • Webcam + fingerprint reader
  • Wireless N with Bluetooth card
  • No TV Tuner w/remote control
  • HP Color Matching keyboard
  • 6 cell Lithium Ion Battery
  • Integrated modem 56 Kbits / s
  Laptop HP Dv5z

  My only hesitation is with the AMD processor. In my view, it is the extra bit of money to get the Intel Core 2 Duo. I'm working on and repairing portable computers and AMD devices only have more heating and other problems.