[Helix 2nd generation] Reconfigure the tablet buttons

Similar Questions

• Is there a 1st and 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

  Is there a 1st & 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

  Hi @tollymcc,

  Welcome to the Forums of HP Support! I see that you would like to know if there is a 1st & 2nd generation of the 62xl HP cartridge. I would like to help you today.

  I came across this information on 1st & 2nd generation cartridges, cartridge more / cartridge of generation more (HP61, 301, 122 and 802). It doesn't look like the HP 62xl is included.

  It will be useful.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Portege M750 and Win8.1 Pro - the tablet buttons do not work

  Hello

  I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.

  In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.

  I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?

  > I don't know that I have installed all the drivers who wverything work with Windows 8

  Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1

  As much as I know the Toshiba can't win on this Portege M750 8.1.
  This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.

  You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver

  So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver

• Portege M700 with Windows7 / problem with assignment of the tablet buttons

  Hello

  After the upgrade of my Portege M700 Windows 7, most of the hardware seems to work.

  One exception are the tablet buttons to adjust the orientation of the screen, or to be used as replacement of slider. When changing the mode of the Tablet (e.g. for the entry of notes during a meeting) the original installation (VISTA) offers certain functions by the buttons on the Tablet (e.g. moving cursor, new page, scroll through the pages etc.). But it seems that these buttons are predefined for some functions of windows and I don't know or find no tool to change that.

  I installed the latest version of the utilities TOSHIBA (util_tvap, value added package) but can't find any tool to affect the proper functioning of the buttons on the tablet.

  Tips how to handle this?

  Thanks in advance...
  Peter

  You have upgraded your Portege laptop using Toshiba upgrade kit or you have installed the clean version of Win7?
  Usually, when you perform the upgrade using the Toshiba upgrade and upgrade pre-installed Vista everything should work properly.

  You also have the latest version of the BIOS?

• Tecra M7: Problems of Vista with the evolution of the functions of the tablet buttons

  Why he isn't an American version of this forum I'll never know...

  First question: when I try to change the tablet on my Tecra m7 said button buttons he has changed, but it is not what I said at. For example, I want to put the right arrow on the multifunction for flip 3d button. The right button still more arrows as he did.

  Second question: the size of the screen, effects are missing in vista. you know that little thing of the window that appears when you set the volume, and then goes after completing Windows xp? Yah that's all. Am I missing some kind of driver or something?

  Thanks in advance

  Hello

  Where to download your drivers and tools? Perhaps it sometimes different versions for the same model but different types of this model.

  I suggest you reinstall this software and especially the drivers for this machine. If you couldn t find something on the USA or the European site (which you visited I think)
  You can try it here:
  http://209.167.114.38/support/download/ln_byModel.asp

  It s the tosh's Canadian Web site. They sometimes had tools and pilots including an another tosh sites Don t have. :(

  So just try it, and if you didn t find anything just make a comment and we will continue on the resolution of this prob.

  Welcome them

• I have ipod touch? 3rd and 2nd generation? The serial number is 1 has 932283201

  I looked through all the descriptions of the 2nd and 3rd generations, but I don't know yet. The serial number is 1 has 932283201

  A second.

  (137235)

• [Helix 2nd generation] Question of frustrating trackpoint. Not possible to activate.

  Hi all

  For some reason, suddenly, my trackpoint has stopped working. The touchpad still works correctly. I tried to remove the driver,-/ re - install Synaptics via software update, restart the software and any combination of these.

  I'm pretty lost. The option "Activate" the trackpoint remains greyed out. I found a few posts associated with it outside the forum and tried to download driver Synaptics directly, but also without success.

  Does anyone have one idea what else to do? Would be really thankfoul for the tips!

  Thank you!

  Since we are all left to ourselves in this forum, here is the fix:

  1. install the latest driver:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-Helix-series-laptops/ThinkPad...

  2. install this registry fix for this specific question:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-Helix-series-laptops/ThinkPad...

  You are welcome and enjoy the weekend

  Moritz

• HP Pavilion X 2 11-h003sa keyboard and the start button

  I have a Pavilion X 2 11 - h003sa running Wwindows 8.1. It's less than a week and without any changes to the system (no software update or driver installs) after a restart, the Start button stopped working and when I try to dock with the keyboard, the start on the tablet button remains lit (but unfounded) and the keyboard does not work. By that, I mean the key and the trackpad do not react, are not all usb devices, and even the charger shows not only plugged into Windows. The orange charging light lights well.

  Weirdest part is the only thing that works - he always knows when the laptop is closed with the connected keyboard.

  Any suggestion or help here would be appreciated.

  Thank you

  James

  Hello, James.

  Your X 2 is perhaps responsible got stuck on something, he is unable to perform; This problem can be self-correcting after a full stop and normal reboot of your tablet. Since it is not always easy to determine the power state of a Tablet, I suggest you make sure that is turned off by pressing the power button for 10 seconds, then release. wait another 10 seconds then press the Windows Start button. You should not feel any momentary vibration when you press the Windows key. When you are certain that the X 2 is turned off, try to start normally. I hope that your tablet will resume its normal operation, but if not, I suggest you contact your region (UK?) HP support because several interactive steps may be needed to determine the cause & fix for your problem; which can lead to a very lengthy process if attempted by the rear "n" following exchanges of the forum.

  Find your HP contact information & support options by scrolling to the bottom of this page, to this you see "On HP" on the left. Click on "Contact us" just below this to see the choices to your selected region or country...

   

  I hope you come back soon with news that your tablet is running normally. However, we will also try to answer questions if necessary.

   

  Good luck!

• No mode of the Tablet CTRL + ALT + DELETE key or Windows security?

  I just bought a laptop / Tablet HP TX2-1020US that came with Vista Home Premium.  Good so far.  I upgraded to OS to Vista Ultimate and my original SBS2008 domain-joined and worked on a large too.

  The problem is: when I'm in tablet mode, no button is "Windows Security" referred to in the prompt "press CTRL + ALT + DELETE or Windows security" in the starting System.  I end up having to convert portable mode, press CAD and convert again in tablet mode and use the biometric login each time.  Same thing to unlock the machine after an invocation of the screensaver, etc..

  HP support says they don't support "as sold" configuration, even if I am invited for an upgrade as it sets up for the first time, I am on my own if I do.  Not a very "the computer's personal again' approach to customer service... ;-)

  I thought I could reassign a touch on the surface of the Tablet--maybe the button "Mediasmart" I wouldn't need otherwise.  But the upgrade apparently took a toll on that too since the dialog box control Tablet PC Panel, in the general and the tabs button, I decidedly enigmatic after the upgrade and the tablet button ID is displayed as @BttnCmn.DLL,-2, -9, -7, etc. (for example the change in screen orientation button is @BttnCmn.DLL,-9).

  I would appreciate a solution that is running boards - the need to press CTRL + ALT + DELETE and brings me directly to where a slip of the finger is a login, or a reallocation of button so I could tap without having to disable-tablet-mode each time.

  Thanks in advance,
  Richard

  And one possible answer is:

  1. Administrative Tools | Local security policy
  2. (Elevation of privilege)
  3. Local policies | Security options
  4. Interactive logon to change: don't require CTRL + ALT + DELETE to "Undefined" to "Enabled".
  5. Close local security policy tool.

  CTRL + ALT + DELETE screen is bypassed, and the login screen is used instead (for which the fingerprint reader works fine).

  Thank you
  Richard

• x 200 tablet buttons not working is not Windows 7

  Recently, I upgraded my X200t to windows 7 and have had difficulties getting the tablet buttons to work.  I went to the support page on the lenovo site and installed the drivers, but to no avail.   I am running Home Premium.  Any help would be great.  Thank you.

  Hey Zebra,

  I recently had a moment of rtfm with this problem.  I've installed and reinstalled the Tablet button drivers... or so I thought.   Order the Readme for the driver.  After you have double clicked on the .exe, it seems as if she moved, but what is extract the files to a folder on the hard disk.   Probably C:\DRIVERS\WIN\TBBTN here unless you have changed it.  Go ahead and click on setup.exe... you have to restart when it's done.  HTH

• Some X 61 tablet buttons do not work

  Hello. I just got a Lenovo X 61 Tablet. some keys did not work. the tablet buttons thinkvantage and mute button. I realized that the tablet buttons did not work because the Tablet has been recently updated to Vista wiindows 7, 32 bit and does not have installed the drivers. I found the drivers for the tablet buttons and they work fine now.

  Unfortunately, I'm unable to find the drivers for the Thinkvantage button and the button mute (to mute the volume, high volume and low volume work correctly). could someone help me find those?

  Thank you in advance

  Hello

  an update on my problem. the hotkey utility did the trick. the thinkvantage and mute buttons are working.

  Thank you very much.

  Alex

• IPod touch 2nd generation, cannot start the dfu mode

  Hello!

  I have a 2nd generation Ipod which is is disabled because of lost password. So I know no more iOS type.

  The problem is that I can't open the dfu mode even if I tried "all" solutions that the web has to offer.

  Whenever I have connect the ipod to the pc, Itunes response is "Itunes can not connect to the device because it is locked. "You need to type the code before it can connect to iTunes."

  I tried the approach that Apple recommended but it does not work. The final solution, I tried was to download recboot and see if I could activate this way dfu mode, but only has not to be helped.

  Turn off the iPod Touch. Press in and hold the home button while connecting to iTunes, make sure that you press and hold the home button before you connect and keep holding until you see the recovery screen, must look like the one below. Once to this iTunes screen should warn you that it detects an iPod in recovery mode and needs to restore. Now, just click on restore and iTunes will restore the iPod touch, no code necessary. I hope this has helped!

  

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• Cannot configure the buttons on the tablet on Portege M750

  Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.

  When I touch the botton nothing happens.

  Do you have XP or Vista installed?

  Have you installed Windows yourself using a version of Windows?

• A white UI drip the battery on the Lenovo Thinkpad 10 (2nd generation)?

  Hi all

  I am a user interface designer is currently working on a project for a hybrid application to use only on the Thinkpad 10 (2nd generation). I myself remember how an amoled display would drain battery when rendering a light interface and I was wondering if the same applied to the screen used on the Thinkpad.

  Random question, I know

  Thanks in advance.

  Stu

  ThinkPad 10 has low resolution LCD display (no AM / OLED), so that the backlight is turned on all the time regardless of the composition of the photo.

  BTW, this is an interesting aspect of the OLED displays from the point of view developer application