Portege M750 and Win8.1 Pro - the tablet buttons do not work

Hello

I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.

In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.

I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?

> I don't know that I have installed all the drivers who wverything work with Windows 8

Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1

As much as I know the Toshiba can't win on this Portege M750 8.1.
This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.

You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver

So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver

Tags: Toshiba

Similar Questions

  • I have a Pavilion Elite M9150F and it seems that the ignition button does not work. The power light is on

    My Pavilion Elite M9150F P/N KC880AA-ABA running Windows Vista Home Premium 32 bit. The device turns on no switch or remote control. He lite is turned on and power is running through the unit until button (checked through AC voltage detector) are there known issues with these? Are there spare parts? It doesn't hang or move the last time it was turned on. What are my options? Thanks for any help.

    Hello cello6996

    You are in warranty? If so, I would suggest contacting HP. If you are out of warranty, follow the steps below.

    How does a power button is essentially that it shorts two special pins. This short film is a signal to the power on the power supply and all components. A quick Google search reveals the most common method to do this is to disconnect the wires to the pins on the motherboard power button and then tap a screwdriver against just these two pins. Use gloves as a precaution. or a screwdriver with an insulated handle.
    How to bypass the power on button on pc
    Is there a way to bypass the power switch?

    If the computer starts correctly something wrong with the power button. If the problem persists, it is more than likely a problem with one of the hardware components and the problem will have to be isolated further. Let me know what happens.

  • Some X 61 tablet buttons do not work

    Hello. I just got a Lenovo X 61 Tablet. some keys did not work. the tablet buttons thinkvantage and mute button. I realized that the tablet buttons did not work because the Tablet has been recently updated to Vista wiindows 7, 32 bit and does not have installed the drivers. I found the drivers for the tablet buttons and they work fine now.

    Unfortunately, I'm unable to find the drivers for the Thinkvantage button and the button mute (to mute the volume, high volume and low volume work correctly). could someone help me find those?

    Thank you in advance

    Hello

    an update on my problem. the hotkey utility did the trick. the thinkvantage and mute buttons are working.

    Thank you very much.

    Alex

  • I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

    I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

    One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

    You can also try to repair the database of places with this extension:

  • Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

    I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

    One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

    You can also try to repair the database of places with this extension:

  • Satellite U500 - the volume buttons do not work

    Hello

    I just bought a Toshiba Satellite U500 two days ago and already problems :(

    It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
    The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.

    Help, please. Is it possible to re-install the drivers?
    The only solution I found is to disable them using HWSetup...

    Great news. Thanks for the comments!

  • The scan button does not work on Windows XP Media Center edition 2005

    Name of the printer: hp psc 1350 all-in-one

    Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

    I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

    Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

    OK, that explains why the scan button does not work.

    The complete software is required for the scan button to work, it is not a feature of the base software.

    Be sure to follow the steps below in order to get is torted:

    1. Unplug the USB from the printer.
    2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
    3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
    4. Download and install the full feature below:
      http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
    5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
      http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

    Kind regards

    Shlomi

  • Documents on the right panel of the Start button may not work?

    Documents on the right panel of the Start button may not work?
    Right click show properties, Blank? Previously ok when click on it goes in the document folder.

    Hello

    1 did you change on your computer?

    2. What happen exactly when you open documents?

    3. are you able to Documents to another location for example the windows Explorer folder?

    Method 1:

    Step 1:

    I suggest you check in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    I also suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to run the System File Checker.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I suggest you send the screenshot of the windows properties document...

    Provide this link to screenshot

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  • Venue Pro 8 - windows button does not work

    It is supposed to take you back to the screen of windows, right?  Well, this isn't.  Returned to the store and got a new.  The same problem.  Tech support chat does not work.  Telephone queue time is 45 minutes more.  e-mail does not support this product.  ???

    Check if you have "FilterKeys" on. (Laptop, ease of access settings, keyboard) If it is enabled, the Windows button will not work.

  • My optical drive is not displayed in "Device Manager" the eject button does not work

    Latitude Dell with Windows 7

    My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

    This means that the drivers are missing or that the disc is broken?

    I tried to restart.

    Thanks in advance

    Dave Roberts

    Original title: Reader in mind windows 7

    Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

    But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

  • Download in the market button does not work!

    Download in the market button does not work! No download by clicking the download button. Enough storage + reboots.

    I just restarted my computer and now I can download.

    Thank you!

  • the light on the power button does not work. How can I activate it?

    HP pavilion dv7

    Windows 7.

    the light on the power button does not work. How can I activate it?

    If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.

    BRAVO is just a system we use to say thank you to informative messages.

  • Portege M750 and Win8 - metro and touchpad interface does not work

    For those of you who, like myself, tried to install windows 8 in a Toshiba Portege M750 and had problems in tablet in portrait mode I recommend the following driver, it works perfectly:

    http://CDN.Wacom.com/U/drivers/TabletPC/ISD_DualTouch_710-8.zip

    The problem that I had was that shot didn't work with the metro interface and touch works also and in portrait, strangely, when you touch the secren with different directions woul two arrows appear.

    This driver solved my problem.

    Hope this can help...

    Thanks for the info.

  • My computer is stuck on the Welcome screen and the power button does not work. How can I activate it finish (and on)?

    My computer is a Windows XP laptop. It actually worked fine this morning, but now my power button does not work and the computer does not start correctly.

    Hello

    Its best to contact the manufacturer of the computer as it might be a hardware problem.

  • Compact Z5 camera away from the lock screen and the camera button does not work as well

    Don't know what that happen but the icon of the camera on the lock screen suddenly disappeared and camera quick launch button does not work as well. Can I still use the camera from apps however.

    Problem solved through launch quick adjustment of the device. However, didn't turn off in the first place. Hoping that this is just a small problem

Maybe you are looking for

  • Firefox 13.0 ALWAYS opens the "Welcome to Firefox" Page, not my Home Page. Will making set, please?

    I tried all the tips of https://support.mozilla.org/en-US/kb/firefox-says-its-just-updated-every-time-it-starts?redirectlocale=en-US & redirectslug = Firefox + has + just + updated + tab + shows + each + time + you + start + Firefox and it had no eff

  • L shaped charger cables?

    I love my new 7050 DV6, his wonderful, but I feel that the 3-inch charger cable jutting out of the right hand side of the unit to an ideal of 90 degrees on the side is a little bit worrying. Especially as in the connector, there is a tiny needle that

  • Windows 8 Pro and Cyber Media DVD/Blu Ray software?

    Just upgraded my HP DV7 to win 8 pro, looking through the HP site on win 8 upgrade and it mentions software multimedia cyber and the fact that it must be downloaded again and reinstalled.  How are you going to download this software by HP and if not

  • Need SM Bus for A75-S231 controller driver

    Unfortunately I do not have my system and backup discs and I desperately need a driver for the SM Bus controller. Problem is surface after re-installing XP Home. I called Toshiba technical support to identify the motherboard chipset shipped with my u

  • cRIO-9024 - supports SSH (Secure Shell) network?

    The Shell Server enable secure (sshd) in the measurement software & automation for the cRIO-9024 OR is not available. Usually, this would be an option as shown here: http://www.NI.com/white-paper/14626/en/ The cRIO-9024 OR does support SSH? Do I need