Is there a 1st and 2nd generation of the HP62xl printer cartridge as if it was with th HP61xl cartridge?

Similar Questions

• HP Compaq 610 ExpressCard, 1st and 2nd generation

  I have a HP Compaq 610 running win7 64 bit and I want to add a USB 3.0 card, but I was wondering if my ExpressCard slot is 1st and 2nd generation, I watched all of the pdf files I can find and manual but no info can anyone help?

  APE1

  Hello

  I tried this and it doesn't have 50% of the time. You can try to gain experiences. Back to your question: it's version 1, because cela "produced ExpressCard 2.0 are supposed to be on the market by the end of 2010." " [16] it is unknown at this point (October 2012) If this standard takes off the market.

  I hope this helps.

• I have ipod touch? 3rd and 2nd generation? The serial number is 1 has 932283201

  I looked through all the descriptions of the 2nd and 3rd generations, but I don't know yet. The serial number is 1 has 932283201

  A second.

  (137235)

• I have a network drive. & Passwords, I want to force their users to log in there every time and do not use the last name of user and password.

  I have a network (an Iomega iconnect nas) drive. I want to force their users to log in there every time and do not use the last name of user and password. They can change it in control of card-how can I make sure they. I'm only using Windows 7 as standalones (with lan), there is no server connection

  Hello

  I suggest you post the same question in the TechNet forum and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Is there a quick and easy way to the entrance of calendar days in a day / diary of the page, instead of setting each page?

  Is there a quick and easy way to the entrance of calendar days in a day / diary of the page, instead of setting each page?

  If you make a text for the day of the page master frame, you can put on a single story that contains every day across all pages of the document. If you separate the days with a paragraph return, you can set the keep Options to start each paragraph in a new frame, and they will all go one-to-a-page.

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  This question cannot be resolved when you use the brush with an effect.

  It cannot be solved with the form of the task.

  Try just drawing on larger scale, maybe then it won't happen.

• Satellite L500D - can only burn the recovery of 1st and 2nd disc

  I bought this 2nd hand computer laptop in the last two days with the factory default reset. However, I could only burn the 1st recovery disc 2 of 4 using Toshiba Recovery Disc Creator.

  I am running Vista Home Premium SP2 32-bit. I started at F8 factory reset "out of the box" settings that went well. I did where there was a small problem when the previous owner restored to factory settings.

  As he had SP1, I installed SP2. I upgraded the BIOS to 1.1 to 1.4, the latest. I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  Downloads from http://www.mytoshiba.com.au/support/notebooks/satellite/l500/pslk0a-00r009/download.

  I changed to another brand of DVD blank. I have checked and unchecked "Verify" in the Recovery Disc Creator. I also have the latest installed version of the Toshiba disc Creator software. I tried to burn discs 3 & 4 separately overall

  I get no error message, just as the taskbar progress 3rd disc ends never quite at the end. The former owner has never created a set of the factory restore disks. Any thoughts would be appreciated.

  Hello

  to be honest, I have not idea why t he does not burn it. I can offer you:

  1. use a high quality like Dvd - R verbatim media

  > I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  2 maybe, he won't burn with Toshiba disc creator software update. Restore back factory settings and try again with the old version of Toshiba disc creator.

• There are horizontal and vertical lines on the screen

  I have an asus game monitor old 2 years... other days I let my 12 year old son House and when I returned, he said my monitor was broken... I shot to the top of the platform and there are... also.i .vertical and horazonaly can see the image on the screen through the lines as if someone in em pencil in... IV never seen this befor... any clues as to get rid of um? Home build phenom 965 be-850 watt he's corsair psu-all sata 1.5 to hdd-7970 saphire dule x - all air cooled and clocked at 4.114

  Check the video cable to the monitor and the computer side, the lines of deformation may indicate when its loose or if you have a bad cable. A bad cable is unlikely, but one cannot rule out completely without trials.

  If you have another monitor or know someone who you can borrow a display test, it would be the fastest and the most effective way to be sure where the problem is.

  If lines change or "move" when you move the mouse or a window autour, this indicates a bad connection or bad cable as indicated above or a problem with the video card. Overclocking can cause this kind of things happen as well so if you have overclocked your hardware, return it back to the factory settings and the problem may disappear.

  If the lines are always the same and do not change when you move the mouse or a window autour, the monitor is probably the problem.

  Figure 8 and 9 on the link below both show what it looks like when the monitor is the problem in the above example: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph05236&lc=en&cc=ie&dlc=en

• What does this mean and how to fix: the router address you entered is not compatible with your WAN IP address.

  I connect to an access provider via Airport Extreme, which is extended through two Airport Express.  When I try to edit anything in one of these devices, even a name, I get this message: "you have entered the address of the router is not compatible with your WAN IP address.  My connection seems to work, but there is clearly something wrong with her.  The Express has no DNS and will not update without the same message.  I have no idea what this is all about and will greatly appreciate the ideas.

  This means that WAN Setup does not or does not install across the network.

  The best way to solve this problem is beginning on...

  Reset all three at the factory and reconfigure each in turn. Do the extreme first and make sure it works... Then add the express.

  If you need help with that we will need to know which modem or modem router to your ISP gave you and possibly the type of services to wide band... and who is the provider.

  Give us screenshots of each installer as you do.

• What is tcauto.exe have encured a problem and needs to close the average? It happned so I was trying to install the tax program h@r Block

  isn't tcauto.exe incurred has a problem and needs to close to average. It happened while I was trying to install the H@r Block tax software

  1. Insert the software CD into the CD drive.
  2. Right click on the desktop icon and select Explorer.
  3. Click the CD-ROM drive.
  4. Choose the file HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe (where XX is the year of the product), and then choose copy.
     The name of the file should State + or + E-file in the name.
  5. Close Windows Explorer.
  6. Right click on the desktop and then click Paste.
  7. Double-click the HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe file (where XX is the year of the product) file.
  8. Follow the instructions in configuration of installation

  http://www.TaxCut.com/customer_support/supportarticle.jsp?type=article&FAQ=0&acid=158&PFID=1&TID=4&STid=10&CID=40&aid=4474§ion=before

• Network Vista and XP - connection to the network printer problem

  I try to print to a network printer connected to a vista from a computer xp machine

  Two computers on a network
  Vista machine is connected through the ethernet card and has a connected printer
  XP machine is via wireless network

  Both machines have the same network name "mshome".
  Open ports on the firewall and also left Software Firewall

  When I print a job, I see it be wound on the info from the printer on both machines, but then, it is automatically deleted.

  I am able to access the hard disks from two computers

  The printer works this way, when you share a printer between XP and Vista where the printer is connected to Vista, XP will communicate with the printer and its drivers Vista.

  So as I suspected it was due from pilots, in your case XP will be offered 64 bit readers which it does not recognize

  If we rely on the printer connected to the Vista 64-bit operating system operating system 32-bit, we need to install the additional drivers (especially the XP must be with 32 bits, only 32 bits of the operating system will not show if it's 32-bit or 64-bit)

  So in this case, you must right click on the printer on Vista and go to the sharing tab, and then click additional drivers, it will be the operating system and Version to select and you will need to select Windows XP x 86 and install the drivers

  Now your Vista will be the 32-bit and 64-bit drivers installed. Now, when you share the printer, when the Contacts XP Vista, Vista has drivers and it will be able to share the printer correctly. Anish

• I have a residential group put in place but apple of my wife air does not recognize and it cannot use the network printer

  How can I solve this problem?

  Only Windows 7 computers can join a homegroup.

  You need to set up a working group for non Windows machines using the network functions.

  And if you have a network printer suitable, then it should not matter what OS you have as long as it has drivers for this printer. I guess that you have a SHARED printer and not a network printer in your question?

• I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message! I use a pc with windows 10 pro

  No response to my problem

  Amy_Wong

  I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!

  !

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite.