Hello FF fails.

Similar Questions

• Windows updates failed to install with error code '80092004' and ' 80246007".

  original title: How do I know if Internet Explorer 9 is installed correctly or not?

  According to the history of my update, IE put 9 updated (?) correctly installed in July 2011.

  However, I have several entries after this date for updates failed. There are 2 error codes: 80092004 and 80246007.

  The version I have on my laptop is still IE 8.

  I don't use IE very often but would get updated and stop doing the update failed messages.

  I should try a manual download and install or is there a better alternative?

  Thank you.

  Hello

  Failed updates are all related to IE 9.

  I followed the two links you posted above. I have run windows update fixit, who said it was successful. I then tried to install IE9 on my update list, and there no, same error code: 80092004.

  I tried a manual install. That failed too.

  As usual with a microsoft update failure I now long in circles. When I click on a screen to learn more about the failure, or click to learn more about the error code, I headed for the same items, the same solutions, that do not work.

  Since I use IE as seldom as I can, I'll stay with IE 8 and hide the update to IE 9. This seems the best solution to get out of my hair.

  Thank you for your interest.

• HP 6730 s, short dst failed

  Hello

  I have a laptop HP 6730 s with windows 7 install. The last time, I have a few freezing problems. When I start the diagnostic tool, she came back with abstract DST failed, ID 60CC5K-GFX61B-XD6W3F-60RQ03.

  How should I do?

  Help, please

  Thank you.

  Hello

  Failing drive short self-test would indicate that the hard disk is defective and must be replaced - it is also compatible with the issue of freezing you describe.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know - include size (IE 500 Gb) of your existing HARD drive.

  Kind regards

  DP - K

• APP-FND-01388, Express has failed

  Hello
  
  QuickPay failed with the following error
  
  APP-FND-01388: cannot read the value for the profile HR:Execute_Leg_Formula option in the routine, and routine.
  HR_6882_HRPROC_ASSERT
  LOCATION py3vntsetup:2
  APP-PAY-06882: Assertion failure detected at the location py3vntsetup:2.
  
  Cause: an internal error has occurred at the location py3vntsetup:2.
  
  Thank you
  Arvind
  
  Published by: user1125901 on November 5, 2010 07:49

  I had this same problem by updating the quantum libraries on a test instance.
  Check the paths in the vertex variables and also the tax_libraries and tax_data columns in pay_action_parameters.

  On unix:

  env | grep VND
  VND_PAY_PL, VND_VERTEX, etc.

  If these look not just that they are defined in the file devenv.env located in $FND_TOP/usrxit

  Once you set them correctly logout and log back in and bounce the applications process.

  It worked for me. Good luck.

• Messages can not send files

  I tried power off to solve a problem with the Messages/iChat for 6 months now and I hope the Apple community might have a solution. We have an office with a mixture of Mac under OS X (based on capabilities) 10.6.8 (off 10), 10.10.5 (2 for those who hate the model) and 10.11.4 (2). We use Hello messages to send text messages, video chat and send small files (usually images) internally around the office. About 6 months ago Messages/iChat lost the ability to send files. Everything works fine (except General bugs of windows mobile / endangered and buddies on the machines of Yosemite/model). On the senders end you get no notification that the transfer has failed, or that you get a small 'I' icon in the window of conversations that draw attention to the failure. The same thing in the 'File transfer' window, sometimes the file will be marked as 'sent', or 'fail', in both cases, the receiver sees the transfer as it is 'impossible' or it crashes with a progress bar that changes to 'fail' if interact you with the download arrow or double-click on the file icon.

  Various forums to suggest solutions, that everything I tried:

  • Quit and restart Messages.
  • Restart the computer.
  • Deleting of plist.
  • Make sure UPnP is enabled on the router.
  • Make sure UPnP is not enabled on the router (learned to love these weird problems, everyone has a different idea)!
  • Ensure ports 443 (Messages), 5190 (UDP for Messages), 5297, 5298 (UDP Hello) and 5298 (TCP Hello) are all open.
  • Compress images.
  • Force quit "matches" in the activity monitor.
  • Ensuring that no one is Little Snitch active.
  • Ensuring that there is no firewall on.
  • Ensuring that user names are not too long (there was a suggestion Hello has an internal deadline that could result in names are identical coupe).
  • Make sure that OS X is updated (this persisted for several updates now).

  There is a guy named Ralph Johns (UK) on Apple's Support forums, which has been troubleshooting this kind of problem with iChat/Messages with various posters since at least 2011. Seems to know his stuff, but has not been able to find a solution for everyone. Posters have tried swapping routers, used wireless instead of ethernet (or vice versa) and even two bad guidance computers connected together via a simple switch, so I am not convinced that there is a network problem.

  Anyone have any ideas?

  Hello

  I've done it since 2004 in fact.

  Re: -.

  • Ensure ports 443 (Messages), 5190 (UDP for Messages), 5297, 5298 (UDP Hello) and 5298 (TCP Hello) are all open.

  IMessages Login using port 443 (made the AIM Login today and Yahoo if you have configured the account)

  Swaps the GOAL to use port 5190 (UDP when this file transfers).

  The other three ports lists are listed as being necessary by Hello but use Little Snitch myself I was never able to prove that a similar thing on behalf of the GOAL and Exchange port during the basic move IM chat to those containing photos of cats.

  Re: -.

  Ensuring that no one is Little Snitch active.

  Little Snitch will block (if you tell) the processes that you cannot associate with Messages as such.

  

  It's pop up you should see if you transfer files with the iMessages account. (Note the server and port).

  Why they have put in place a different process instead of use the same AIM, Jabber and Hello use.  It has a slightly different name.

  I tried to send pictures on PURPOSE to my MacBook Pro that uses iChat 5.0.3

  I have also tried to send using Hello from iMac MacBook Pro and cannot operate.

  However the Hello from the MacBook Pro to the iMac strangely works.

  The version of iChat says that the File Transfer window expected FRO me (in the iMac) to meet start sending in trying to use AIM.

  However, the Chat window in iChat 5.x.x watch separately a message from AIM servers saying that the AIM Proxy did not work and try again and it make no changes to the file transfer window.

  2nd attempt to use iChat 5.x.x Hello also failed.

  It seems to be no reason why it fails.

  Re: -.

  Ensuring that user names are not too long (there was a suggestion Hello has an internal deadline that could result in names are identical coupe).

  Hello items in the sidebar of finders tend to take the name of system preferences > sharing

  The ID Hello buddy would then map My user on the name of the computer remote computer@the

  

  Possibly the naming conventions have changed over time, but I don't normally have questions (the MacBook Pro doesn't seem like spaces or apostrophes when I named it wherever the iMac running OS version much later when appointed allows them).

  However as I had them connected should not be the issue.

  Which can be a problem is to name them all Macintosh or the Admin according to the naming process, that you can use and if a Diskimage is used to make them all have the same applications and settings.

  UPnP occurred as iChat 3 and 4 used so several ports you couldn't open them all in Port Forwarding set ups.

  Video and Audio conversations only used 22 ports

  GOAL was three

  Hello supposed to use 3 in the Apple Documentation

  Jabber claimed to need at least one, but was actually 2 to cover the SSL connections.

  See using iChat with a firewall or a NAT - Apple Support router

  Two things that you don't mention that you have tried.

  NVRAM (PRAM) reset How to reset NVRAM on your Mac - Apple Support

  and a secure start

  Repair permissions appeared in disk utility in El Capitan and was always decried as useful in many settings, while others swore by it.

  Finally, you might want to watch and read and write permissions.

  It has become much more complicated with some applications such as Messages can be sandbox which adds several layers of reading and writing of files you need also to have access to write even the .plists

  I'd take a peek at this thread and useful (Orange) marked post-test and resolved green one if necessary.

  The Original message is followed by the fixed one but one useful by that you should start is then displayed.

  

  21:42 Thursday; July 21, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• I can't print because my Lexmark x 422 driver has a problem, where can I get this driver?

  I don't know why it's not working, but it does not leave my wireless printer works

  Hello
  You failed to mention which version of the Windows operating system you are using. You will need to do, is go to the Lexmark support site and search for your printer. Once you find it, you should see a section for drivers and downloads. You'll want to choose one that is which version of Windows you have.

  This should dissipate any printing problems you have.

  I hope this helps. Just reply to the results.

• HP 8600 more unresponsive when you print from MacBook Pro

  I just bought a HP Officejet Pro 8600 Plus and I am using the printer on a network with windows and mac (layer, Imac, macbookpro). Printing with my windows (windows 8) are no problem. However the print with my macbook and the tablet will not work. Or the printjob freezes in the print queue (after 13%) or he know finished printjob and the printer does not respond.

  I tried several times to reinstall the software, repeatedly reset the router, printer, and macbook but its still the same.

  A new fact is that a printjob finally out of the printer after about an hour.

  Help!

  MacBook Pro with OS 10.7.5

  iPad 2

  Hi Herman,.

  OK... to sum up cela a bit for my understanding...

  1 printing works via AirPrint so connected in WiFi Direct to the printer.

  2. Printing now works very well with the HP printer driver in your typical network, but only with added using the IP printer.

  Can you please also test printing with HP printer driver when the Officejet is connected via Wireless Direct and added as a device Hello? I'm curious to see if it works now, which means the HP printer driver works well.

  It works, so the printer and driver are fine.

  If that works fine, but still print via AirPrint or HP driver printer using Hello connection fails in your regular network, then this is somehow related to your router settings. Please check if all multicast or IGMP settings that need to be enabled or disabled. I also suggest to contact your service provider for details on your router.

   

• Windows Defender was error 0x800106ba

  How to start the windows defender service manually, because I got error: 0x800106ba. on my windows defender & I don't know what to do

  Hello

  «Failed to initialize: 0x800106ba.» A problem caused Windows Defender service to stop. To start the computer or search help and support on how to start a service manually restart the service. "Sound familiar? Here is an overview on how to manually start the Windows Defender...

  Press Ctrl + ESC, or right-click on the start/Windows Orb. Type "cmd". Right-click in the Programs (1) section where you can see and icon for cmd - select 'Run as administrator'.

  Type "net stop windefend. If the service is already stopped very well.

  and type

  'net start windefend '.

  This should restart windefend and you get this error. Hope this helps,

  Steve <> Microsoft Partner

• Political map SFR

  What is the difference between open failure, and failure for the SFR?

  Hello

  • Fail-close keyword defines the ASA to block all traffic if the fire ASA power module is not available.
  • Emergency key word games the ASA to allow all traffic through, if not inspected, the module is not available.

  Here is the documentation for the same thing:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa93/configuration/fi...

  Thank you

  Guillaume

  Rate if this can help!

• sites WebCenter installation error

  Date: Tuesday, June 2, 2015 16:51:16 GMT

  Content-Length: 1164

  Content-Type: text/html; Charset = UTF-8

  Connection: close

  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 project / / BY" > ".

  < HTML >

  < HEAD >

  < TITLE > error 404 - not found < /title >

  < / HEAD >

  < BODY bgcolor = "white" >

  < FONT FACE = Helvetica > < BR CLEAR = all >

  < TABLE border = 0 cellspacing = 5 > < TR > < TD > < BR CLEAR = all >

  < FONT FACE = "Helvetica" COLOR = "black" SIZE = "3" > < H2 > error 404 - not found < / H2 >

  < / POLICE > < table > < /TR >

  < /table >

  < TABLE border = 0 width = 100% cellpadding = 10 > < TR > < TD VALIGN = top WIDTH = 100% BGCOLOR = white > < FONT FACE = "Courier New" > < FONT FACE = "Helvetica" SIZE = "3" > < H3 > of RFC 2068 < i > Hypertext Transfer Protocol - HTTP/1.1 < /i >: < / H3 >

  < / POLICE > < FONT FACE = "Helvetica" SIZE = "3" > < H4 > 10.4.5 404 not found < / H4 >

  < / POLICE > < P > < FONT FACE = "Courier New" > server has not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. < /p > < p > if the server does not wish to make this information available to the client, the status code 403 (refused) may be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. < / POLICE > < / p >

  < / POLICE > < table > < /TR >

  < /table >

  < / BODY >

  < / HTML >

  [18:51:39.483 2015-06-02] [CS. CSSetupEngine.postURL INSTALL] [INFO]: post success for http://localhost:7001/cs/HelloCS

  [18:51:39.857 2015-06-02] [CS. CSSetupEngine.doPing INSTALL] [INFO]: Ping database successful.

  [18:51:39.954 2015-06-02] [CS. INSTALL] [INFO] CSSetupEngine.postURL: PostURL success for http://localhost:7001/cs/Install? test = test & reset = FALSE & CSInstallType = single & CSInstallAccountName = ContentServer & CSInstallAccountPassword = % 7BAES % 7D57FB2563B615AB6630483ED0132A5BEA & CSInstallDirectory = C %3 A % 2FOracle % 2Fwebcenter % 2Fsites & CSInstallAppName = fwadmin, & CSInstallAppPassword = % 7BAES % 7D88A21D9353F9BDDCD80751A90800F620 & DSN = csDataSource

  [18:51:45.383 2015-06-02] [CS. CSSetupEngine.testConnectionAction INSTALL] [INFO]: test the connectivity of database and user configuration.

  [18:51:45.408 2015-06-02] [CS. CSSetupEngine.postURL INSTALL] [INFO]: post success for http://localhost:7001/cs/HelloCS

  [18:51:45.441 2015-06-02] [CS. CSSetupEngine.testConnectionAction INSTALL] [INFO]:

  Test Server Web and Server Configuration of the Application completed successfully.

  [18:51:45.450 2015-06-02] [CS. CSSetupEngine.testConnectionAction INSTALL] [INFO]: attempt to Ping the database.

  [18:51:45.472 2015-06-02] [CS. CSSetupEngine.doPing INSTALL] [INFO]: Ping database successful.

  [18:51:45.498 2015-06-02] [CS. CSSetupEngine.Initialization INSTALL] [INFO]: test user configuration and creation/verification of user tables.

  [18:51:45.506 2015-06-02] [CS. CSSetupEngine.initReinitAction INSTALL] [INFO]:

  Beginning of ContentServer database initialization...

  [18:51:45.545 2015-06-02] [CS. CSSetupEngine.initReInitAction INSTALL] [ERROR]: failed to initialize the database.

  The initialization was attempted with csDataSource as the DSN.

  The URL that was passed in = http://localhost:7001/cs/CatalogManager .

  Please check your connection and the properties of the files settings.

  [18:51:45.555 2015-06-02] [CS. CSSetupEngine.initReInitAction INSTALL] [ERROR]: error received = failed command: Create table

  Failed to create the catalog of Sysinfo

  Initialization error: response of the system =

  <!-FTCS | result = failure | reason = failed command: createtable. Err = - 22 | command = createtable. params = | ->

  Cannot create the catalog < br > Sysinfo

  <!-FTCS | result = failure | reason = Can not create Sysinfo catalog | ERR =-100 | command = InitializeSystem | params = | --> < br > ERROR: failed to initialize the system catalogs! < br > < br >

  Failed to create the catalog of Sysinfo

  [18:51:45.565 2015-06-02] [CS. Worker.run INSTALL] [ERROR].

  Installation failed.

  Check the log file.

  Click Yes to change your choice of installation

  and try again to install.

  Click No to stop the application.

  [18:51:58.261 2015-06-02] [CS. CSSetupEngine.postURL INSTALL] [INFO]: post success for http://localhost:7001/cs/HelloCS

  [18:51:58.275 2015-06-02] [CS. CSSetupEngine.doPing INSTALL] [INFO]: Ping database successful.

  [18:52:03.718 2015-06-02] [CS. CSSetupEngine.Initialization INSTALL] [INFO]: test user configuration and creation/verification of user tables.

  [18:52:03.719 2015-06-02] [CS. CSSetupEngine.initReinitAction INSTALL] [INFO]:

  Beginning of ContentServer database initialization...

  [18:52:03.747 2015-06-02] [CS. CSSetupEngine.initReInitAction INSTALL] [ERROR]: failed to initialize the database.

  The initialization was attempted with csDataSource as the DSN.

  The URL that was passed in = http://localhost:7001/cs/CatalogManager .

  Please check your connection and the properties of the files settings.

  [18:52:03.748 2015-06-02] [CS. CSSetupEngine.initReInitAction INSTALL] [ERROR]: error received = failed command: Create table

  Failed to create the catalog of Sysinfo

  Initialization error: response of the system =

  <!-FTCS | result = failure | reason = failed command: createtable. Err = - 22 | command = createtable. params = | ->

  Cannot create the catalog < br > Sysinfo

  <!-FTCS | result = failure | reason = Can not create Sysinfo catalog | ERR =-100 | command = InitializeSystem | params = | --> < br > ERROR: failed to initialize the system catalogs! < br > < br >

  Failed to create the catalog of Sysinfo

  [18:52:03.749 2015-06-02] [CS. Worker.run INSTALL] [ERROR].

  Installation failed.

  Check the log file.

  Click Yes to change your choice of installation

  and try again to install.

  Click No to stop the application.

  [18:56:26.779 2015-06-02] [CS. CSSetupEngine.Initialization INSTALL] [INFO]: test user configuration and creation/verification of user tables.

  [18:56:26.780 2015-06-02] [CS. CSSetupEngine.initReinitAction INSTALL] [INFO]:

  Beginning of ContentServer database initialization...

  [18:56:26.812 2015-06-02] [CS. CSSetupEngine.initReInitAction INSTALL] [ERROR]: failed to initialize the database.

  The initialization was attempted with csDataSource as the DSN.

  The URL that was passed in = http://localhost:7001/cs/CatalogManager .

  Please check your connection and the properties of the files settings.

  [18:56:26.813 2015-06-02] [CS. CSSetupEngine.initReInitAction INSTALL] [ERROR]: error received = failed command: Create table

  Failed to create the catalog of Sysinfo

  Initialization error: response of the system =

  <!-FTCS | result = failure | reason = failed command: createtable. Err = - 22 | command = createtable. params = | ->

  Cannot create the catalog < br > Sysinfo

  <!-FTCS | result = failure | reason = Can not create Sysinfo catalog | ERR =-100 | command = InitializeSystem | params = | --> < br > ERROR: failed to initialize the system catalogs! < br > < br >

  Failed to create the catalog of Sysinfo

  [18:56:26.814 2015-06-02] [CS. Worker.run INSTALL] [ERROR].

  Installation failed.

  Check the log file.

  Click Yes to change your choice of installation

  and try again to install.

  Click No to stop the application.

  Hello

  Failed to create the catalog of Sysinfo
  

  This err =-22 means that the table already exists. You have a failed the earlier installation? If so, you must delete all tables that have been created before restarting the installation.

  If you have no prior install, make sure that you install on a new scheme, and the database user doesn't have access to any other schemes that already exist in the same database.

  Kind regards

  Stephan.

• 1Z0-117: Oracle Certified Expert, Oracle Database 11 g Release 2 SQL Tuning

  Hello
  
  I failed the exam 1Z0-047 Oracle database SQL Expert"x 3 and will pass the exam in January 2012. I'm sure I'll spend this time :-) to 95%
  
  Now my question: what's next 1Z0-047? I only know how to leave 1Z0-047. I am SQL scripts to my work, but no DBA work and not of PL/SQL. So I guess that the "Oracle Certified Expert, Oracle Database 11 g Release 2 SQL Tuning" would be the next logical step?
  
  Is 'Oracle Certified Expert, Oracle Database 11g Release 2 SQL Tuning' too complicated for me (only have knowledge of the exam 1Z0-047). Because I don't have experience with the topics listed in the objectives, for the most part never heard talk about.
  
  What study guide?

  So I guess that the "Oracle Certified Expert, Oracle Database 11 g Release 2 SQL Tuning" would be the next logical step?

  I agree with you.

  The Oracle 11 g Release 2 database: review SQL Tuning is still in beta at least until November 24, 2012. Beta versions have been known to be extended. Even if this isn't the case, the examination of the production is not available before mid-January 2013 about. I had one experience with a beta. I hated and will never be another. There is little reason to do so, and most importantly (reduced cost) is not important to me because my company reimburses the cost of my essay, so I don't really care about the savings. They take several times longer to complete and I was a mess at the time that I finished that I did with a headache roaring through a large part of the review.

  That said - answering your question:

  1Z0-047 is a really complicated test. The questions and answers are designed to mislead. There is a reason for that. SQL, by its very nature, is a fairly simple language. Part of its appeal, is that it is easy to understand and write. If the people who wrote the essay was not gone to their best to make the deliberately convoluted SQL code, then it would not have required skills 'experts' to pass. It is much more difficult to read and diagnose poorly written SQL as well written SQL.

  I also took the test Application Express Expert: 1Z0-450. The questions that it were not written in a deliberately confusing manner. However, they had need intimate knowledge of the interface of the Apex. Because it was possible to write questions 'hard' without having to make them deliberately more obscure, the questions were simpler. I did not review SQL Tuning (as I said... no more betas for me), but I suspect that it will be similar to 1Z0-450 has enough information "at the level of experts" to write questions on that test will not attempt to write "hard" questions

  Is 'Oracle Certified Expert, Oracle Database 11g Release 2 SQL Tuning' too complicated for me.
  Because I don't have experience with the topics listed in the objectives, for the most part never heard talk about.

  Not sure what is in the test. This is excellent news. Student for the test will teach you a lot of new things about writing and tuning SQL. In my posts, a concept is repeated again and again. The value of certification is not make a piece of paper to stick in a workbook. The value comes to what new skills you gain in is about to pass the test. If you do not know the information and that you are not studying for the test, Yes, you will not pass. If you prepare for the test until you do understand the objectives, then you should be able to pass the test.

  What study guide?

  None does not yet exist. There is no doubt that I will write a review study guide. It won't be until some time after the test is in production. I do not publish guides for which I hold the certification. Do not wait for good. You can use the same exact source, I will use in his creation - the Oracle documentation. I guarantee you that all topics on the unique OE page and every single question that is under review are answered somewhere in the documentation.

• Preliminary investigation to review?

  Hello - I failed the review of VCP and wonder if investigation initially added no weight to the questions asked? I responded to this survey, which was where my weakness and it seemed that I you have any questions asking things I've ever seen on the review practice or anyhweres else. With only 2 weeks to study for the examination, all the world has input on the investigation or the best way to use my time for the last 2 weeks critical?

  Thanks in advance

  The survey helps us to determine the skill levels and to establish cut scores, it influences the number of types of questions you get on one in any way any specific review objective.  I would certainly review the master plan for the review and wherever you see a goal that you aren't comfortable with, review of documents about that objective.  The plan is available for download in the documents section of this forum and there are several sites of good study related during the forum.

  Kind regards

  Jon C. Hall

  Technical developer certification

  [email protected]

  2077 Loma Linda way n., Clearwater, FL 33763

  727-446-8430 Office

  727-460-8448 Mobile

  Fax 702-554-3727

• Manual failover with several Standby logical

  Hello
  
  I failed to run with two standby failover logic. The transition to the
  at the first news is successful, but when I try to sinchronize the second logical standby I
  get this error in the alert.log and the trace:
  
  SERVICE NAME:(SYS$USERS) 2011-02-21 02:05:32.644
  SESSION ID: (138.8) 2011-02-21 02:05:32.644
  The main database identifier does not match the database
  identifier associated with the standby redo log of the
  logical standby database.
  ORA-16086: standby database contains no logs available pending
  
  The scenario is llike this:
  
  Server role
  primary Leopard
  Tiger to sleep 1
  Lion to sleep 2
  
  The passage of leopard to Tiger works well. But new primary sinchronization, tiger, with
  second sleep mode, lion, breaks with the error ORA-16068.
  
  Is this possible?
  
  Thanks in advance!

  You did not provide a version number, or enough information to find out how you have configured a part any configuration.

  If the first line into two logical Standby it replicates standby who then reply standby B or both all too?

  If the primary went what mechanism is in place, the new principal to replicate to B? Expect to also replicate logic from the previous day, return to the primary origin?

  We need a lot more information to help you.

• Querying the database

  Hello
  Oracle fail safe:
  
  which means:
  Querying the database
  
  And what happens when it is disabled?
  
  Thank you

  to query a database or a server wants to call her to see if she is still ongoing (e.g. ping,...)

  Best regards
  PP

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.