Automatic update because of problems with the USB ports.

Similar Questions

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Problem with the USB ports, coast and Bluetooth in Satellite A100-237

  Hello, I own a laptop Satellite A100-237 and I have an annoying problem for quite a while now. The two USB ports in the side as well as the Bluetooth device will not work. What is the bluetooth device is it is simply not recognized by the system, as if it wasn't there (it is said the installation of the driver too) while any device I connect to USB ports side does not work either.
  The other two USB ports in the back work very well.

  Hello

  Maybe this two ports are really defective, and there is not much to say. You will get your laptop for repair, or you live with it and use the other two USB ports. Sorry, but I see your ad as a report short and not as some to ask for help.

  Bye and good luck!

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• Updated to Lion - problems with the mode of the unit

  I've recently updated my iMac - 8 GB ram, 1 TB hd - manufactured 2010.

  I had a VM for pre-existing (Win XP Pro) that I had left my PC.  Although very well, I can use the virtual machine in stop mode, the unit was very buggy.  I lost control of the mouse, the screen redraws is a problem and copy / paste between the VM and the Lion are incompatible.

  I've upgraded to the latest version of VMware 3.1.13 - (sorry if this isn't the correct version number - but I've upgraded).

  Has anyone else had problems with the mode of the unit?

  VMWare has been notified of this issue and if so, is there no work around?

  Thanks for any help on this.

  You reinstall your VMware tools after upgrade to 3.1.3 Fusion?

  Go to the menu of Fusion, the Virtual Machine-> install VMware Tools, after completing the installation, restart your guest and see if the unit is very well.

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• New Firmware Canon (1.1.3) on Canon 5 d Mk III leads to problems with the USB Active extension cable

  At first I thought it was new version of Capture One Pro 7 or and the last update of OS X 10.8.3, but the camera is no longer connects to Windows 7 with a Capture One Pro 6.4.4 or 7.1.1. And this is always related to Windows 7. When I used a regular usb cable without the Extender everything has worked on computers and two software platforms.

  Please fix asap Canon and don't blame someone else cause this is without a doubt you do!

  You are right. After trying new camera on pc and mac, we tried a friends 5 d mkiii with the extension and it works. So, after spending several hours on it, I think it's the camera itself.

• I can't see a message from my Union because of problems with the address changed for pop-upwindows and some other issues

  Hello
  I am from Sweden and I have problems with a Web site that has my Union. I could see messages from them before, but they changed their address and on the site, they say people that they must put the new address on the approved list of the pop-up windows. I did but it still does not. Maybe I did wrong, I don't know, but it's annoying as hell that I can't see the messages they send.

  I really need help with that.

  Best regards
  Lena

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can delete all data stored in Firefox with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• updated Android app - problem with the new/old P12 certificate

  Hello

  We have updated our android App, one was built in October 2013, and now, we have used the new web tool for building application - since I'm on a new Mac I can't access the old certificate of P12, I created a new certificate P12 and signed then new app "apk" with her... And now when I try to download this new APK on google game I got a message:

  Failed to download

  You have downloaded an APK that is signed with a different certificate to your previous APKs. You must use the same certificate. Your existing APKs are signed with the certificates with fingerprint (s)...

  It is true, but is there a way to get around this if I don't have the old P12 files?

  It's something you'll have to ask questions about Google. Their mistake is pretty clear that they want you to use the previous certificate, and that is beyond our control.

  Neil

• problems with my usb ports

  I recently got my laptop and my mouse stopped working, I originally thought it was just that the mouse was dead. After having bought a new mouse, that he has not yet decided anything, I tested the two mice on my friends laptop and they work fine.  I was wondering if there are any patches, can I do I have tried troubleshooting and that didn't work other than sending to any ideas what I could do?

  Hi cpav0625,

  1. this question comes up with other USB devices also?

  You can try to run the Fixit and check:

  Check out the link:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem against the USB port

  I have HP Pavilion 2301ax g6. but I'm tired of Windows 8...
  SO today, I install Windows 7 ultimate. ....
  I hv installed all necessary drivers...
  but... then also my USB PORT does not work... 1 port works, but is not another...
  but I m up to tgat sure there must hv sm software problem. .. .my port is good...
  When I plug the mouse, then the Red shot... but mouse doent work...
  
  Please, I beg you. Help me imeadetly. .....
  thnx... Please help me...
  and also provide me win7 ultimate my laptop drivers... HP Pavilion g6-2301ax
  Please...

  Hello:

  You must first install the graphics driver for the model I posted.

  Then, you need to install this software so that the webcam to work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117932-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5275619 & sw_lang =

• Problem with the serial port and external DLL

  Hello

  I have a Platinum (innco systems CT 0500), which is connected via a USB-RS232 to PC Converter. I want to fight in LabVIEW.

  The software CD contains a DLL and a header file - I imported both in LabVIEW.

  But I am unable to get a connection via LabVIEW COM port. There is an error of the adage about function ConnectTurntable() return code 'could not open port - port address is unknown to the PC or port is used by another program.

  The demonstration of the delivered CD software works - the connection to the COM port is working with him, so there must be a mistake in my LabVIEW Code.

  Thanks in advance