Hello, what is the application made in the computer? Is it safe to delete?

Similar Questions

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• Hello, what is the maximum settings "readyboost" I can use it will benefit my system?

  Hello gang,

  
  
  The PC gods were not nice to me (admittedly, I explored things better left to someone who knows what they're doing!)
  4 3 systems are in the shop! It's the curiosity for you!
  in any case, I'm trying to run my business together via an obsolete zv6000 HP/XP which now, I am so grateful to have never let go for some ridiculous cheap because of its antiquity. I have to admit that for a former average daily price laptop, that it hold its own & has not crushed or skips a beat so far. Its a revelation to my new quad-core 64-bit W7, of 2 TB hardrv. on a system with a fraction of what is now considered ways.
  in any case, it will be a week or more before finishing to fix my new PC & I'm trying to squeeze as much speed & quality photos out of my HP older than possible in the meantime. We've all heard of ready boost and how it works. My question is: Why am I limited to roughly define max loan-boost 4G on my 16 G scan momar. Blade? I have a Pocket media external 160Gig who came to my old HP and I have a the same problem, my current XP laptop will not allow a higher setting of ready-boost. I'm sure there's a technical explanation for this and I would like to know what it is, also can not I not also devote a small partition of my main drive for the memory of virtual reality or designating a flash drive only for ready-boost prevents me from cumulation? Y at - it other tips sly to speed up this old laptop XP? I have 2 Hardrives internal of 1 to everyone who was initially appointed to go in my last version, but they are not formatted when even (they are still in the box) if I get an IDE/SATA connector can I piggy save one of them to serve as storage for a higher speed? Or my old O.S and M/Board will remain my permanent bottleneck is not worth sinking money in when I have all these projects around the installation & some shortages of technical brainpower!
  Thanks a lot for direction my efforts in the right direction, away from the rocks!
  peace, Alan

  Wednesday, April 17, 2013 17:57:49 + 0000, ovenmaker1960 wrote:

  in any case, I'm trying to run my business together via an obsolete zv6000 HP/XP which now, I am so grateful to have never let go for some ridiculous cheap because of its antiquity. I have to admit that for a former average daily price laptop, that it hold its own & has not crushed or skips a beat so far. Its a revelation to my new quad-core 64-bit W7, of 2 TB hardrv. on a system with a fraction of what is now considered ways.
  * Anyway, it will be a week or more before finishing to fix my new PC & I'm trying to squeeze as much speed & quality photos out of my HP older than possible in the meantime. We've all heard of ready boost and how it works.

  ReadyBoost works on Windows Vista, 7 and 8. You can't use it on
  Windows XP.

  Furthermore, in my experience, ReadyBoost only have advantage if you use
  on a system with very little (less than 2 GB) of RAM. On most computers it
  Nothing or almost nothing.

  Ken Blake

• What are the computer causes to jump from one page to another while on internet

  When I go from one page to the other page would go back to page to page without doing me anything

  Hello

  1. what browser do you use?

  If you use Internet explorer, then follow these steps and check if that helps:

  Method 1:

  Try to run Internet explorer mode without modules and check to see if the same problem happens:

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  Method 2:

  Try to optimize Internet explorer and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Method 3:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Error CRITICAL_PROCESS_DIED in a blue screen; Unable to start the computer in Mode safe.

  Original title: Critics of the process is dead

  Hello

  Yesterday, my Acer Aspire given bsod with the critical error process is dead.  I am on Windows 8 and cannot enter the old f8 for safe mode to fix.
  I don't have a disc of Windows 8, I downloaded Microsoft 8.  Acer not supplied with Windows 7 preinstalled, so once again no disc.  Microsoft when I asked how do to access safe mode tried to charge me $ 99 more taxes to do this.
  Does anyone know how to access the mode without failure under Windows 8 in does not?
  Thank you

  I usually access SafeMode in this way. Go to made CMD.exe right click and run as administrator. Then type msconfig. When it opens, go to start at the top and then click safe mode. You might be able to do this if you are able to get an installation media for windows8. There is a command-line option when you go to fix your computer. You might be able to do it here because you cannot start windows.

• Unable to get the computer out of safe mode

  Remove my computer in Mode safe and return it to a Normal Mode

  * original title - get my computer out of safe MODE and return to a NORMAL MODE. I almost tried everything and I hate the thoughts to start over and lose all my info computers *.

  Remove my computer in Mode safe and return it to a Normal Mode

  Hey Sissyspkc1

  Follow the steps below

  Close all running programs and open the windows if you are back on the desktop.

  Click on the Start button (en).

  In the Start Menu () search box type msconfig and press enter on your keyboard.

  The System Configuration utility opens

  Click the Startup tab.

  Clear the check mark in the box secure boot and under the general tab, select the Normal startup option. One or the other of these options are not available

  Press apply, then the OK button.

  When the program prompts you to restart, allow it to do, and you should boot into normal mode in Windows Vista.

  Walter, the time zone traveller

• After win 7 update at the start of my stops of the computer in Mode safe

  After win 7 update to start my computer continues to Safe Mode to choose (new) Win 7 or Vista operating system (old / deleted).  How can I fix it?

  Original title: win 7 start

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

  http://NeoSmart.NET/DL.php?id=1

• Can't connect to internet unless the computer is in safe mode with networking

  Please, let me apologize first.  This is my first time using this forum and I was not aware of how to create a new thread.  Thank you Steve for helping with this.  Here's my question below:

  I have a Desktop Window Vista Home Basic.  I have great internet connection. I can surf the web in SafeMode with network.  However, when I try to access internet in normal mode, I get an error message: cannot display the Page.  When I click on the link to problem diagnose it indicates that the computer detects a connection from home.knology.net, however, there may be a remote firewall blocking the connection.  Firewall systems only 2 that I know are windows and MacAfee and I disabled both of them.  I contacted the ISP and they state it's the computer.  I just bought the computer on 07-02-08. Any help in this matter would be greatly appreciated.

  Thank you

  Bridgett

  
  

• With the current caveat regarding internet explorer, your search engine 'google' is safe? If this is not the case, what would the search engine more safe?

  Same as above. I am concerned by the help of internet explore right now. I would like your answer.

  Firefox is a browser, not a search engine. Also, Internet Explorer is a browser, not a search engine. Google is a search engine (even if they make a browser called Chrome). Firefox is more secure than Internet Explorer, and you should consider moving to this full time. But Google is just a search engine used by Firefox to help you better use the internet and has nothing to do with the security of Firefox in general.

• X201T tablet - cannot lock the computer or press ctrl + alt + delete to the Security screen

  Hi guys.

  Sometimes, when the X201T is in the mood not close correctly (and having the light of HARD drive shuts down for an infinite period of time), I find that I can't lock my computer with windows-L.  Also, I can't hit ctrl-alt-del to bring up the Task Manager.  Finally, I can't run any software which shows a UAC prompt, as consent.exe will be backgrounded and I am never offered the chance to hit Yes.

  I believe that it is related to the central issue-that, for one reason or another, the machine won't let something to support the display.  Consent.exe would require half black machine out for the guest screen.  Lock would send you to the lock screen, and Ctrl-Alt-Del displays the Security Menu of Windows.

  I run Windows 7 x 64.

  I installed the operating system from scratch, and I took care to follow the instructions in "installing OS from scratch" Lenovo on their Web site.  Entirely, I realize that the order of the driver and the software install issues with Thinkvantage stuff.

  I do IT doesn't work and I have deployed a lot of laptops Lenovo to employees over the years.  I don't think it's something I am doing wrong, but you never know!

  Just to see if it was a problem with my windows install, I reinstalled Windows yesterday, and I get the same behavior.

  Sorry for all the posts, everyone.  As you can see, I have many questions.

  Finally solved this problem.

  You must make sure that the following Windows 7 hotfix is applied:

  Windows 7 (32-bit, 64-bit) update Module KB976755 (WW) - ThinkPad X 200, X 201 tablet.  You can get this information from the Lenovo support and download site.

  Although the writing on this hotfix does not refer to this problem, this eliminated the problem for me.  I found that Lenovo System Update didn't install the fix.

  My assistance spent a little time with the support of Lenovo to identify this problem.  My understanding is that the fix is included in the preload image Lenvo the camera comes with, so you will get this problem if you do a clean installation of Windows 7 and Lenovo system update does not install the fix.

• What is the default separateFrame in formsweb.cfg?

  Hello
  
  What is the separateFrame by default, the width and height in formsweb.cfg?
  use the forms [32 bit] Version 10.1.2.0.2 (Production)
  
  I've made changes 2 set the applete w/h 2 centered on the form window now I wana get back it's... ?
  

  # Forms applet parameter
  width=750
  # Forms applet parameter
  height=600
  # Forms applet parameter
  separateFrame=false
  separateFrame=false

  Since I have 2 separateFrame = false but I remmbered 1 of them where true by deault one that the first or the second 1 in order...?
  
  Kind regards
  
  Abdetu...

  separateframe under sepwwin could be true.

• What is the best model of the MacBook?

  Hello, what is the best model of MacBook for me to get to school/work?

  It depends on what you want to do with the MacBook.

  Also important is how much storage space you think you'll need.

• What are the error messages you see in the window "run/eventvwr"?

  I received the phone call from "Microsoft Service Center" (guess it's scam) but when they took me to run eventvwr/I had several mistakes - this is significant.  Their website has been ammyy.com.  Someone at - he heard of this?

  Hello Peggy.

  Yes, it's a serious scam, do not allow them to do something. The event shows you what events the computer crossed over from the start. These errors may be associated with conflicts .dll or programs do not load. If you have some errors, you can have someone to look at those but without one I don't know what to tell you.
  Here is a site that can help explain what is the event viewer. It is a wiki, so keep in mind information is for reference only.

  http://en.Wikipedia.org/wiki/Event_Viewer

  I hope this helps.

  Jim

• If 'error exe win32 not valid' and the program runs what are the consequences

  running 32-bit applicaation on win 7 and receive "not valid win32 application" error message.    the application continues and it seems to work, but what are the consequences of running the application?

  Hi Wayne,

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  File is corrupted, bad or missing:

  Ø If the hard disk is damaged or bad, it can cause work programs to fail, either because not all data can be read from the hard disk the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  O if you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  Ø If you try to run a program that is not designed for your version of Windows, you can get this error.

  Ø although many old programs designed to work in older versions of Windows work with new versions of Windows, unfortunately, not all programs will work.

  O if the program is an earlier MS-DOS program or start program Windows, you will get this error.

  Ø If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it does not work and generates this error.

  File is a virus, worm or other malware file:

  Ø this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  O if the file has been checked and is clean, it is always possible that the virus protection program or another program installed on the computer is causing issues when installing or running the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.

  Hardware incompatibility:

  Ø If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.

  O download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Hope one of the suggestions above will help with your problem.