After win 7 update at the start of my stops of the computer in Mode safe

Similar Questions

• Error CRITICAL_PROCESS_DIED in a blue screen; Unable to start the computer in Mode safe.

  Original title: Critics of the process is dead

  Hello

  Yesterday, my Acer Aspire given bsod with the critical error process is dead.  I am on Windows 8 and cannot enter the old f8 for safe mode to fix.
  I don't have a disc of Windows 8, I downloaded Microsoft 8.  Acer not supplied with Windows 7 preinstalled, so once again no disc.  Microsoft when I asked how do to access safe mode tried to charge me $ 99 more taxes to do this.
  Does anyone know how to access the mode without failure under Windows 8 in does not?
  Thank you

  I usually access SafeMode in this way. Go to made CMD.exe right click and run as administrator. Then type msconfig. When it opens, go to start at the top and then click safe mode. You might be able to do this if you are able to get an installation media for windows8. There is a command-line option when you go to fix your computer. You might be able to do it here because you cannot start windows.

• Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Hello

  What operating system do you use?

  Method 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/AE/support/main/supportMain.do

  http://www.samsung.com/ae/support/search/supportSearchModelResult.do?menu=SP00&searchWord=SamsungSyncMasterB2330monitor&default_searchInputBox_value=Enter+model+number+or+keywords&searchInputBox=+Samsung+SyncMaster+B2330+monitor+

• Cannot download the updates on the computer

  Original title: how to get updates on windows 7, mine does not update

  mine shows all the update failed, always looking for new updates, but the computer never downloads none

  Hi bonnie563,

  What antivirus or firewall is installed on the computer?

  Follow these steps to solve the problem.

  Method 1: Solving problems run Windows Update

  Windows 7 comes with a built-in utility to update problems. Run it and see what has to say. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2: Temporarily disable the firewall or a third-party antivirus software

  If you have any third-party firewall/antivirus, disable all and just keep the built-in firewall of Windows when downloading updates. See if this allows you to perform the download.

  Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.

  To disable the third-party firewall, see the documentation provided with the program or contact the program vendor.

  Method 3: Turn off Accelerator software

  Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.

  Method 4: Journal see Windows Update

  By default, the Windows Update client records all transaction information in the following log file:

  %WINDIR%\WindowsUpdate.log
   
  If the methods above does not resolve the issue, view the log file for more investigations.
   
  For help on the log file, see: How to read the Windowsupdate.log file

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an 80070663 error when installing an update on the computer.

  Original title: impossible to install KB2687499 on Windows Vista

  The microsoft Installer Update continues to detect sequences of security update Microsoft Office (KB2687499) 32 - bit Edition if necessary to install on my system and continues to fail.  So I downloaded the update manually, but when I run it, I get the message: "Please wait while the update detection is to be run." and then I get the message "an error has occurred during execution of detection."  I called the Help Center (SRX1193068976ID) and gave them the windows update 80070663 error code.  The representative sent the following links:

  < your="" answer="" tech="" thought="" you="" might="" find="" these="" links="">
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-A43D-26ee4f42efe2

  http://support.Microsoft.com/kb/913754

  I followed all the instructions and I can not yet solve the problem.  Any help would be greatly appreciated.

  Thank you
  PAM

  Hi Pam,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the installation of an update on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) you are able to install other updates on the computer?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 1 and 2 require changes need to be made in the register. You must back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: The Chkdsk scan will try to identify and repair bad sectors on the hard drive. All the data on these areas could be lost in the process. The computer can also enter a no start condition.

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Unable to get the computer out of safe mode

  Remove my computer in Mode safe and return it to a Normal Mode

  * original title - get my computer out of safe MODE and return to a NORMAL MODE. I almost tried everything and I hate the thoughts to start over and lose all my info computers *.

  Remove my computer in Mode safe and return it to a Normal Mode

  Hey Sissyspkc1

  Follow the steps below

  Close all running programs and open the windows if you are back on the desktop.

  Click on the Start button (en).

  In the Start Menu () search box type msconfig and press enter on your keyboard.

  The System Configuration utility opens

  Click the Startup tab.

  Clear the check mark in the box secure boot and under the general tab, select the Normal startup option. One or the other of these options are not available

  Press apply, then the OK button.

  When the program prompts you to restart, allow it to do, and you should boot into normal mode in Windows Vista.

  Walter, the time zone traveller

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• Do not start satellite A300-1AK after Win Vista update

  Hello all, hope someone can help me

  I have a toshiba laptop with a view, I got the brilliant idea to make a update for a long time that no was not updated at the end I restarted the update as necessary nb. and then nothing!

  The practice turn on the toshiba nb outside screen and then the screen remains black, the hard drive does not read, I tried to put the recovery disk and start the disk but nothing to put the dvd, but no operating system, does not read anything...

  That's happened? Possible that an update is this damage? The problem and as I have already said that I can't act somehow...!

  -I can't access the computer Safe Mode
  -always black screen and does not load the hard disk
  -J' updated because I just reset the laptop with the recovery DVD, so the drive worked, once the update is complete, restart Windows that I came out of this black screen, I noticed that does not read the hard drive. ..

  Thanks for all the support and suggestions.
  Please send me more ' procedure to run

  Francesco

  Hmm, do you mean you don't see anything? Neither the Red Toshiba start screen?
  What to say it doesn't sound good.

  But try this short workaround:
  Disconnect the power adapter, remove the battery. Leave the laptop for a while disconnected from both parties I would wait a few hours
  Then bring the two parties together and try power upward

  Good luck

• HP G61-110SA: HPG61 after use important update of the HP Advisor Win 10 processor

  After win7 Win10 Update, HP Support Assistant also updated but HP Advisor now always works to use 20 to 30% of the CPU.  Someone at - it ideas please?

  Hi @ChrisB4,

  I think that you can get everything you need from the HP Support Assistant. HP Advisor verifies the moor of the PC. But inside the HP Support Assistant who installed in it now.

  Hope this helps to answer the concerns that you have.

  If this solves the problem, mark this message as accept as a Solution.

  Thank you.

• Pavilion g7t-1100: Internal Microphone does not work do not on HP Pavilion g7t-1100 after winning 10 update

  Can someone (1) confirm that this model of laptop computer has an internal microphone and (2) say how to operate?

  Story:

  I've had this laptop for several years with Win 7 64 bit, recently upgraded to win 10 64-bit edition.  When you run Windows 7, I've certainly used an external microphone with the Jack, but I'm not sure I've ever used the internal mic.  Yesterday I tried to use Skype and couldn't get the microphone to work (I don't have an external mike where I am now).  Started trying to analyze and the only peripheral record listed in the recording of the sound control Panel tab is "Stereo Mix, IDT High Definition Audio CODEC" - don't know if this applies to the internal mic.  Speaking to, or by tapping on the hole of the microphone above the display caused no response at all in the level to the right of the window bars.

  Began to doubt that I have an internal mike, so looked up specifications.  On http://support.hp.com/us-en/document/c02910495, I found "Webcam with integrated digital Microphone (VGA)", which led me to go on webcam integrated under imaging devices.  Still no final confirmation that I have a mike internal, but I found a laptop computer with mike identified next to the webcam image, this corresponds to my laptop, so I really think that the material is there.

  I used Device Manager to check the updates for the device webcam (HP Webcam-101), and he says that the drivers are up to date.  I did the same thing for the IDT High Definition Audio CODEC, also updated.  I think that the drivers have been updated when I upgraded to win 10 in February.

  That's it - information or suggestions are welcome.

  Hi there @BruceBon,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the microphone on your HP Pavilion g7t-1100 CTO Notebook PC.

  The reason why you can't find loads or User Guides/Manuals books appropriate because the model you have is a laptop CTO, this means it is customized/configured to order. Where did you get to buy your laptop?

  When I went to the Service Guide and HP Pavilion G7 maintenance (generic), it shows an internal microphone located at the top of the LCD, but again, your laptop is a CTO model this is why there is no specification of final product because each of them can be customized.

  You can try to look over some of the screenshots in the microphone troubleshooting document. There are a few sections of this document that you can try.

  • Using the troubleshooting tool
  • Check the settings of the sound
  • Rise in the level of the microphone volume

  If you right click you see him show disabled devices and display devices disconnected in the recording of the Properties tab?

  They have check marks next to them?

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems, and where you bought your laptop from.

  Have a great day!

  Thank you!

• After installation of updates, received the critical error, then stuck in a reboot loop, Windows Defender now firewall and Security Center are all off

  I recently downloaded updates from microsoft. One of them was Security Essentials. Well, when I did caused a critical error. My laptop shut down and restarted. then gave me the same error message and rebooted again. He kept in a continuous loop. I tried the system recovery, but that did not work. I managed to get him to stop, but now my firewall is disabled and the Security Center and Windows Defender. If I try to turn it on, it does the same thing again. I don't know what to do to solve this problem. I need help!

  Original title: critical error

  Hello

  1. you have any multiple security software installed in the computer?
   
  2. What is the exact error message?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Disable all third-party antivirus programs
  
  To disable a firewall, antispyware or antivirus program, right click on the appropriate icon for the firewall, anti-spyware or anti-virus program in the notification area in the taskbar. Then, click exit or click disable.
   

  a. in Windows Vista, click on start toreduce this includes this image, type appwiz.cpl in the Start Search box and press ENTER.

  b. in the list of installed programs, search for and then click on the program in question, and then click Remove.

  c. restart the computer.

  Note After you uninstall a third-party antivirus software, contact the manufacturer of the program or visit the company's Web site to see if a cleaning tool is available to help you remove any remaining files.

  Step 2

  See services

  a. click on start

  b. type services.msc

  c. navigate to the Windows event controller (right click on and select properties)

  d. set the startup type to automatic, start the service, click on apply and OK

  e to navigate to the Base filtering engine (right click on and select properties).

  f. set the startup type to automatic, start the service, click on apply and OK

  g. navigate to 'Windows Firewall' and select Properties (right click on and select properties)

  h. set the startup type to automatic, start the service, click on apply and OK

  Method 2

  Start your computer in a clean boot to avoid conflicts with third-party software.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  
  Note: follow step 7 of the article mentioned above to start the computer in normal startup, once you have completed the necessary troubleshooting.

  Method 3
   
  Look for errors in the event viewer.
   
  Please check the Event Viewer logs to find errors in application logs.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Please post the results for a better understanding of the problem causing the reboot.
   
  Hope this helps

• Win 7 update, blocked the installation of 30%

  After following the recommendations and install the recommended patches, update my computer started working. 222 dates have been recommended. After letting this update process to go through, a "re-boot" was necessary. My system started and everything was fine. Return to the update application, more than 85 files necessary installation. I welcomed and closed during the night. Back this morning from the computer, came to the screen "install updates", got to the point 30% completed and the circle of rotation has been there for an hour and a half. HD light and intermittent activity is present.

  Ideas, recommendations for the I do now?

  Thank you

  Roy

  Windows 7 update problems? First read this.

  :)

• After 2.2 update, error: "the Apple software update server is not found."

  Apple Software Update just updated itself to the version 2.2.  After letting the Apple Software Update 2.2 finish, I receive the error: "the Apple software update server is not found.  Check your Internet settings and try again. "The tool also pointed out"the new software is available from Apple.  I run in a typical home environment to network with a router on FIOS on Windows 10.  A virus scan was clean.

  I just uninstalled iTunes and apps and fact a relocation fee.  Once again the proposed Apple Software Update app updated to version 2.2.  After the update successfully, the error appears again: 'the Apple software update server is not found.  Check your Internet settings and try again. »

• HP 8600 Pro (networking): HP 8600 Scan after winning 10 updated

  After upgrade to win 10, I got all this work completely but the printer to scan of the computer via the control panel of the printer Scan button.   I get the "computer not found but msg network icon is bright blue."  I can scan the computer using utilities HP Scan or scan window.  Going through fax and printing of test and analysis of the HP and solving problems of fax says everything is fine.  The scan button worked bewfore the btw upgrade.

  The wizard of the printer is not here after the upgrade. I remember the interface of front.  AIO remote and HP Support Assistant, HP Scan & capture. The HP icon on my desktop is a shortcut to setup.exe in the folder "C:\Program HP HP Officejet Pro 8600\Bin\". Next step?

  It seems that my suite is incomplete!

• After an automatic update of the El Capitan, initialize to send diagnostic request. Is this real or a Trojan horse?

  Auto-installé update for El Cap 10.11.2 12/17 unattended via usual application store auto-updated. When I opened to the top of the standby mode the MacBook was initially white Virgin, then spinning dot gray then the screen asking permission to send diagnostics to Apple and the developers. All looked for real, but it could be a kind of Trojan horse?

  Whether it's a major OS update, such as 10.11.1 to 10.11.2, it is legitimate.

  It will look as if you set partially up the computer again. Should ask you to allow the diagnosis must be sent, and then show a computer small logo that says: "Setting your Mac upward" with a few small "data bars" on the screen. I don't know why Apple did allow you to send diagnostics and set up your mac after each update. I guess they have to ask anytime you install new software to avoid any legal problems.