HELP - after installing Windows "updates important' all of a sudden my software no longer works!

Similar Questions

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• Error code: 0xC004E002, the software licensing service reported that the license store contains data of the unstable after installing Windows updates.

  Original title: I installed a windows update and all of a sudden I can't connect to my computer using my password it says error data is unstable with microsoft

  It says the software licensing service reported that the license store contains inconsistent data.      I have a windows vista hp pavillian

  Code 0xC004E002

  Hi JillCollas,

  When you are in the display of error message you will get a support contact option once you click on it, it should open up Internet explorer. If you are able to open IE page, then follow the steps and see if it helps.

  a. Click Start and type cmd in the search box.

  b. right click on cmd and then click Run as administrator.

  c. at the command prompt, type the following commands and press ENTER:

  Type: net stop slsvc (it may ask you if you're sure, select Yes)

  Type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  Type: Rename tokens.bar tokens.dat

  Type: cd %windir%\system32

  Type: net start slsvc

  Type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  Reboot twice

  You may enter the product again key, and then activate.

  For more information, you can consult the following articles:

  Error 0xC004E002 during activation of Windows Vista and Windows Server 2008

  Activating Windows: Frequently asked questions

  Hope this information is useful.

• No sound after installing Windows Update KB2962407 on Windows 8

  After installing Windows Update KB2962407 (RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014), the PC loses all the sounds.  Its returns if I uninstall this update.

  Hello

  Microsoft has confirmed that this problem occurs on some Windows 8 PC.  You can solve this problem by opting for Windows 8.1.

  Microsoft made in Windows Update KB2962407 to fix this problem.  While installing Windows 8.1 is the preferred method, you can also resolve this problem in Windows 8 by checking the updates of Windows and reinstall Windows Update KB2962407 .

• After installing Windows Update, all programs are very slow or have stopped responding.

  Original title: O.S. corrupted by Windows updates!

  After the Windows updates installed, all THE progs. v. slow or stop in response, & System Restore will not work. Scan found no virus.

  Hello

  Please repost the link below in the windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows Movie Maker does not work after installing Windows updates

  my film creator of windows XP home SP2 after obtaining updates (SP3 and others) does not work. How to fix this or how to get free a similar program for video editing?

  See if the following .dll file will help. The Windows Update agent, Wups2.dll file are perhaps not properly saved.

  Open a command prompt window (start-> all programs-> Accessories-> command prompt) and type the command:

  regsvr32 wups2.dll

  Let us know if that helps.

  Marilyn

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get his problem after installing windows update on May 18, 2016

  Original title: updated 18/06/2016

  Has anyone else been having sound problems with the new batch of updates? I tried to download the drivers, but that didn't work and now I had to restore my system from the 18th daily. Any ideas on how to identify the update is the cause or what driver I may have missed? My computer is a Dell Latitude E5420, running 64-bit Windows 7 Prof. Any other information needed let me know. Thank you!

  Hello

  According to the description, I understand that you are facing the problem in your computer after Windows installation updated May 18, 2016.

  Yes, you can view the installed update so that you can identify the updates that are installed in May 18, 2016.

  Please follow the steps to see updates history in Windows 7:

  1. Click the Start button.

  2. Then select Control Panel > programs.

  3. And then, under programs and features.

  4. Select view installed updates.

  View update installed please check that the update installed in May 18, 2016 and uninstall the update one & check if the sound is working well and find the culprit, update.

  Please follow the methods described below to check if it helps:

  Method 1: perform a Clean boot and install Windows Update.

  If its a major update, I recommend you put the computer in a clean boot state and install it again in order to minimize interference that could cause this noise problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: uninstall and reinstall the Sound Driver.

  1. Press Windows + X key.
  2. Type devmgmt.msc (to open Device Manager)
  3. Find and select the audio driver.
  4. Right click on the driver.
  5. Uninstall the audio driver.

  Windows automatically installs the generic driver, otherwise I recommend you download & install audio driver on the website of the manufacturer to check if it helps.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Cannot open iTunes, after installing Windows updates.

  Original title: I Tunes

  Just did a windows update and now ITunes doesn't open

  Hi Sean,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. What are the numbers of installed Windows updates Knowledge Base article recently?

  3. that you get an error message when opening ITunes? If Yes, what is the exact error message?

  This problem may occur if the iTunes software is corrupted.

  I suggest you to uninstall and reinstall iTunes and check if it helps.

  
  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Hope this information helps. Please provide the necessary information to help you further, I'll be happy to help you.

• Vista - boot failure after installing Windows updates

  Hi, I use windows vista and for the last two days every time I shut down my computer, load 16 updates. Then when I restart my computer, it will start up repair and system restore. It would seem that these updates are causing a problem launching. 4 are the updates for office 2007, so I don't think it's one of those at the origin of the problem, but the other 12 are related to questions of security and authentication with vista and I suspect this is one of them. Help, please! I copied the updates below.

  A security update cumulative for Internet Explorer 7 for Windows Vista (KB2360131)

  Download size: 7.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Security issues have been identified that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=202013

  Help and Support:
  http://support.Microsoft.com

  Update of security for Microsoft Office Excel 2007 (KB2345035)

  Download size: 8.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Office Excel 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2345035

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office Word 2007 (KB2344993)

  Download size: 8.8 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A vulnerability of security in Microsoft Office Word 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2344993

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security for Microsoft Office System 2007 (KB2344875)

  Download size: 7. 4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security vulnerability in the 2007 Microsoft Office System and the Microsoft Office Compatibility Pack that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2344875

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update security for Windows Vista (KB2207566)

  Download size: 189 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to bring the affected system to stop responding. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=201705

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB2281679)

  Download size: 357 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=201722

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB2296011)

  Download size: 1.1 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=201086

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB2378111)

  Download size: 12.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=201098

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB2387149)

  Download size: 557 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=201703

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB979687)

  Download size: 881 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=190553

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB979688)

  Download size: 216 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=190553

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB981957)

  Download size: 1.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=201093

  Help and Support:
  http://support.Microsoft.com

  Update security for Windows Vista (KB982132)

  Download size: 118 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=194560

  Help and Support:
  http://support.Microsoft.com

  Update for the filter of junk e-mail in Outlook 2007 (KB2410711)

  Download size: 3.1 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  More information:
  http://support.Microsoft.com/kb/2410711

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update for Windows Vista (KB2345886)

  Download size: 1.3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios. After you install this item, you may have to restart your computer.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=202472

  Help and Support:
  http://support.Microsoft.com

  Windows malicious software removal tool - October 2010 (KB890830)

  Download size: 2.6 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  After the download, this tool runs once to search your computer infections by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and remove infections found. If an infection is detected, the tool displays a status report the next time that you start your computer. A new version of the tool will be offered each month. If you want to manually run the tool on your computer, you can download a copy from Microsoft Download Center, or you can run a version online from microsoft.com. This tool is not a replacement for an antivirus product. To help protect your computer, you must use an antivirus product.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=39987

  Help and Support:
  http://support.Microsoft.com

  I had a similar problem. The update worked for me was KB2360131, I had to hide and the rest updates went well. This is what I did:

  (1) turn off the automatic updates

  (2) set up the Windows Update service manual init

  (3) restart

  (4) delete C:\Windows\SoftwareDistribution directory of the Windows folder

  5) go to the Windows Update site and search for updates

  (6) once he finds all the updates, go to the list and hide KB2360131

  (7) install the rest

  It will be useful.

• Pogo games won't load after installing windows updates

  Windows updates were installed last night. I was on the computer at the same time play games on pogo.com. I closed IE and authorized updates run. After installation and restarting, my pogo games will not load. Everything else on the site seems to work fine. Since thiese updates, I had the IE window pop up without be clicked to open, my voip for a short period, does not open. When I discovered the problem with the games, do not load, I tried to clear my NET temporary files, erased the java cache, which usually fixes this kind of problem. It made no difference. I ran disk cleanup, no change. I ran ccleaner, no change. I tried 2 restore points, failed on both. I have Vista OS. There were several updates installed, all but 1 were recommended, most of the rest were for components of microsoft office. I have all the modules of the tool bar disabled except for java, sun microsys, Adobe shockwave, components of Skype and norton/symantic components. I did a norton scan and nothing detected, my software is up to date. I have enough disk hard vacuum to play games online in pogo. pop ups are allowed for ea and pogo games. Should I tryu uninstall update 1 by 1 or what?
  Please answer as soon as possible. I tried to call support (@ 5:30 p.m. CST), but there was no answer. I am disabled and spend a lot of time playing games and "intermittent with friends" on pogo. I usually am troubleshooting for my group of friends when they have computer problems, but this has me stumped... Help... Thanks a lot for your suggestions... Lana57D

  Hi Lana57D,

  Thank you for using answers Forum.

  What happens when you try to load the game?
  You receive an error message that you can post on this forum?

  First thing I suggest is to reset the internet settings for Internet Explorer:
  Method 1: Reset the Internet Explorer settings if you have Internet Explorer 7 or Internet Explorer 8 is installed, you can repair damaged files or missing registration information in Internet Explorer 7 or Internet Explorer 8. To do this, follow these steps:

  1. Start Internet Explorer.
  2. On the Tools menu, click Internet Options .
  3. On the Advanced tab, click reset .
  4. In the Reset Internet Explorer settings dialog, click reset to confirm.

  Then the next thing that I propose would be to re - install your Java installation.
  Here is a link to the Pogo site that explains this operation.

  http://eapogo.custhelp.com/cgi-bin/eapogo.cfg/php/enduser/std_adp.php?p_faqid=5794

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IRQL_NOT_LESS_OR_EQUAL 0x0000000A after installing Windows updates

  Blue screen with the following information:
  IQRL_NOT_LESS_OR_EQUAL

  STOP: OxOOOOOOOA

  I get this error for the second time in two months on a Lenovo R61 laptop after installation of the latest version of Windows Update there is very little time.  Sometimes after a few minutes after the start-up of the machine without provication.  The first time was the same scenario, but seemed to go away after a week or so mysteriously.  I used the laptop for almost a year with no problems before installing updates.

  I have Vista pre-installed with the recent updates installed.

  I don't have a new hardware or drivers that could lead to conflict - it comes factory all installed on the laptop.

  I have 2 GB of RAM, but I have a NVIDIA chipset.

  I tried the defragmentation tools, system repair, etc. without change to the problem.  Any advice?

  Hello

  Check the updates of Windows to see if a driver has been updated all the time that these questions came.

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  --------------------------------------------------------------

  My generic bluescreen problem:

  Hello

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.