Help! Blue screen Crash!

Similar Questions

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Blue Screen Crash with BCCode: 116.

  OT: Blue screen Crash.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 116

  BCP1: FFFFFA80123714E0

  BCP2: FFFFF88004A30E5C

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\041815-25053-01.dmp

  C:\Users\Chris\AppData\Local\Temp\WER-104427-0.SysData.XML

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Can anyone advise on how to remove this anomaly, such as mentioned above?

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• Blue screen Crash 0x7a error - whenever I play a game fullscreen (in this case, Fallout New Vegas)

  original title: Blue Screen Crash - whenever I play a game fullscreen (in this case, Fallout New Vegas)

  For some reason that I was constantly blue screen crashes whenever I'm playing Fallout New Vegas on my computer. I'm positive my computer takes care of everything, I will list the specs below. He broke down twice today while I played for a good two and a half hours before the first, but then when I rebooted and went back into the game, he has frozen almost immediately so I ended the process. Then I tried once more, maybe got 10 minutes of play until a third crash...

  Here are my specs;

  Biostar H55 HD motherboard Intel

  Intel i3 to 2.93 GHz processor

  Mushkin 4 GB Ram DDR3 (1333 MHZ)

  500 GB Seagate HDD

  NVidia GeForce GTS 450 graphics card

  Orion HP650D 650W PSU

  I went into the Device Manager and ensured that all my drivers are up to date, that don't seem to not be.

  Here are the final details of the accident.

  1

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: 7A
  BCP1: FFFFF6FC400070C8
  BCP2: FFFFFFFFC000000E
  BCP3: 00000000108BA860
  BCP4: FFFFF88000E19008
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\111010-25156-01.dmp
  C:\Users\Adam\AppData\Local\Temp\WER-51921-0.SysData.XML

  2

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 4105

  More information about the problem:
  BCCode: f4
  BCP1: 0000000000000003
  BCP2: FFFFFA8005B20B30
  BCP3: FFFFFA8005B20E10
  BCP4: FFFFF800031855D0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\111010-31187-01.dmp
  C:\Users\Adam\AppData\Local\Temp\WER-42468-0.SysData.XML

  If someone could give me a hand I would be very grateful, it became extremely frustrating :(

  Hi Adam,.

  This method works.

  the sfclog tells me that the files in this folder are damaged:

  C:\Program Files\Windows Sidebar\Gadgets\Weather.Gadget\images

  Replace them with the files of your DVDs:

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  BugCheck CRITICAL_OBJECT_TERMINATION (f4)
  A process or thread crucial to system operation has unexpectedly left or been
  terminated.

  1 crash is probably caused by: csrss.exe

  ExceptionCode: c0000005 (access violation)

  the second accident is caused by your HARD disk:
  MODULE_NAME: hardware_disk

  FAILURE_BUCKET_ID: X64_0xF4_IOERR _C000000E_IMAGE_hardware_disk

  Your disk has i/o errors causing Windows to fail. Back up all the data and check the HARD drive with a diagnostic tool.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue screen Crash BCCode e1.

  Original title: Blue screen crash

  Hello

  Sometimes, I get a blue screen crash and hoped someone could tell me why.

  Here is the relevant information:

  19/07/2013

   

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               e1

  BCP1: FFFFF80003B78D50

  BCP2: 0000000000000002

  BCP3: FFFFFA800C822790

  BCP4: FFFFFA800C822790

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071913-41355-01.dmp

  C:\Users\JEM\AppData\Local\Temp\WER-165485-0.SysData.XML

  I posted the .dmp file, zipped to Skydrive. Here is the link HTTP://sdrv.ms/15gXEz4.

  Thanks in advance for your help.

  McAffe often contributes to BSOD

  
  Please remove and replace it with Microsoft Security Essentials at least to test...

  
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

• By clicking on the firefox icon causes the blue screen crash

  It started Friday, February 25, at mid-day. The only changes to the system this morning there were a plugin Adobe Flash player or Shockwave update, I'm not sure and an update on the Office of Scottrade Elite trading app. Two of these changes took place around 0900. The problems began around 1130, when the system, Windows 7 Home Premium had a blue screen crash. Therefore, I uninstalled each of the applications mentioned. I can't open Firefox to work on plugins, because whenever I click on the icon I get a crash blue screen with the words "Failure of Page in the nonpaged area" at the top. I also uninstalled and reinstalled the Firefox application with no clear beneficial effect. Scottrade trading app has been reinstalled and working well, causing no other probs.

  Hi all

  I have just recived an e-mail from mrcart and I think it is very likely that his problems were caused by "Iolo System Mechanic Pro":

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-crashes-with-blue-screen-when-running/3e72f5e2-0d59-4946-8050-401a397e2911

  "Windows 7 crashes with blue screen during the execution of IE8, 'page in the nonpaged area failure'...
  What this shows is that the ampse.sys driver is the cause of the crash.
  The ampse.sys is a driver for System Mechanic Pro.
  System Mechanic Pro has been known to cause problems in Windows 7...

  best regards / John Kirk.

• Blue screen crash

  Hi guys,.

  Its a week ago my laptop started to have a problem with this blue screen crash. This blue screen appeared suddenly and forces it to close. At startup, it hangs at the start page. It appears the Hp Logo in the Middle East and "Press ESC to continue" but nothing happened when I hit ESC. It will take some time before it can be turn on again after clicking on F8 at startup to save Mode.

  Here is the link to the Minidump file

  http://www.mediafire.com/?5c36f4a8iue9oti

  Also, im using Hp Probook 4411 s. I have no idea how to solve this thing crash blue screen. Thanks in advance for your kind answers.

  Have you tried running sfc/scannow? Hello

  Microsoft System Restore can be applied if you enter in safe mode or operating system you can enter inside Windows? No matter if, within windows or safe mode, you can press start, all programs, accessories, System Tools, and system recovery. Will appear a Board where you can select an earlier date in time as attempt to correct the problems.

  Run chkdsk /f /r can be launched in cmd, if you enter in safe mode you can press start, all programs, accessories, cmd. Then type the command and press ENTER.

  If you don t know how to get in safe mode, when you turn on the device immediately press F8 repeatedly, appears advanced startup options and there you can select Safe mode and press ENTER.

  Alternatively, you can run full antivirus scan of the system, but what is your antivirus protection?

  Post the results and doubts or questions Don t hesitate and ask.

  Best regards.

• HDMI causes the 'Blue screen' Crash Vista (64), Dump & Halt

  Vista (64) 'Blue screen' Crash, Dump & Halt causes the HDMI

  I have a HP Pavilion dv9843cl Entertainment Notebook PC

  .. .and when I tried my HDMI it fails and does not hurt with a Vista (64) judgment of crash, dump and system 'blue screen '.

  Any ideas of what can be the cause?  .. .and even better, a solution?

  Greg

  Try the old driver 7.15.11.5665A. I solved my problem with the old driver.

• Windows Server 2008 R2 Standard 32-bit blue screen Crash

  Hello

  Our company used a Windows Server 2008 Standard 32-bit R2 as a database server and the Web server at the end of 2009. It was working fine until recently. In the last 6 months, we do experience error blue screen and system crash. It happens at random may be once or twice a day or it just doesn't happen at all for 2 or 3 weeks.
  The last blue screen was on 14 September at about 7:30, I take the Memory.Dmp with Windbg and here is the content file:
  Debug version of Microsoft Windows (R) 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.
  Loading dump file [C:\Windows\MEMORY. DMP]
  The core dump file summary: the single kernel address space is available
  Symbol search path is: SRV * c:\websymbols* http://msdl.microsoft.com/download/symbols;srv * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (2 processors) free x 86 compatible
  Product: Server, suite: TerminalServer
  By: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Computer name:
  Kernel base = 0x81a1d000 PsLoadedModuleList = 0x81b34c70
  The debugging session: Wed Sept 14 07:32:17.377 2011 (UTC - 04:00)
  System Uptime: 0 days 10:37:36.088
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  Use! analyze - v to obtain detailed debugging information.
  BugCheck D1, {10, 5, 0, 8bf70422}
  ERROR: Module load completed but symbols can be loaded for aarahci.sys
  ERROR: Module load completed but symbols can be loaded for intelppm.sys
  Probably caused by: aarahci.sys (aarahci + 3d 422)
  Follow-up: MachineOwner
  ---------
  0: kd >
  ! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: 00000010, referenced memory
  Arg2: 00000005, IRQL
  Arg3: 00000000, value 0 = read operation, 1 = write operation
  Arg4: 8bf70422, address memory
  Debugging information:
  ------------------
  READ_ADDRESS: 00000010
  CURRENT_IRQL: 5
  FAULTING_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0XD1
  Nom_processus: System
  TRAP_FRAME: 81b12b10-(.trap 0xffffffff81b12b10)
  ErrCode = 00000000
  EAX = 00000000 ebx = 8e209038 ecx = 00000007 edx = 00000080 esi = 8e203bdc edi = 79000010
  EIP = 8bf70422 esp = 81b12b84 ebp = 81b12bc0 iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  aarahci + 0x3d422:
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h] ds:0023:00000010 is?
  Reset the default scope
  LAST_CONTROL_TRANSFER: from 8bf70422 to 81a6afd9
  STACK_TEXT:
  81b12b10 8bf70422 badb0d00 84c67c38 00000080 nt! KiTrap0E + 0x2e1
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  81b12bc0 8bf70899 8e209038 84a2a458 84a2a360 aarahci + 0x3d422
  81b12bdc 8bf70c96 8e203bdc 00000002 00000006 aarahci + 0x3d899
  81b12bf0 8bf673b2 8e203bdc 81b12c14 8bf3b32e aarahci + 0x3dc96
  81b12bfc 8bf3b32e 8e203bdc 84a11a30 84a11ae8 aarahci + 0x343b2
  81b12c14 8bf37d81 00a2a08c 81b12c38 8bf860b4 aarahci + 0x832e
  81b12c20 8bf860b4 84a2a004 849dd784 849dd780 aarahci + 0x4d81
  81b12c38 81 has 63970 849dd780 84a11a30 81ddaf6b SCSIPORT! ScsiPortInterrupt + 0x2a
  81b12c64 81a638e9 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch2ndLvl + 0 x 44
  81b12c64 8c3d1406 ffffff02 81b12cf8 00000061 nt! KiChainedDispatch + 0 x 29
  81b12cf8 81acdcd4 84c59cb8 85278ac0 00000000 intelppm + 0 x 1406
  81b12d50 0000000e 81ac5861 00000000 00000000 nt! PoIdle + 0x2d1
  0000000e 81b12d54 00000000 00000000 00000000 nt
  ! KiIdleLoop + 0xd
  STACK_COMMAND: kb
  FOLLOWUP_IP:
  aarahci + 3d 422
  8bf70422 8b 5010 mov edx, dword ptr [eax + 10 h]
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: aarahci + 3d 422
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: aarahci
  Nom_image: aarahci.sys
  DEBUG_FLR_IMAGE_TIMESTAMP: 48920ae4
  FAILURE_BUCKET_ID: 0xD1_aarahci + 3d 422
  BUCKET_ID: 0xD1_aarahci + 3d 422
  Follow-up: MachineOwner
  ---------
  -----------------------------------------------------------
  I check the server system property and I see that we use ADAPTEC Serial ATA RAID host as storage next to Microsoft iCSCI and ADAPTEC RAID SCSI Disk Device 500 GB HD controller initiator.
  I also see that ADAPTEC Serial ATA RAID host uses aarahci.sys as a pilot, I check the driver, it's the most recent driver.
  My question is the same as I understand that there is something wrong with the driver, but I don't know what really happened. Maybe the driver is not good, the disc has fault or we do not have enough memory (our server has only 4 GB of RAM and memory load is still > 80%, sometimes it reached 96% and current Page File is 4265 MB)
  Can someone help me to point out what exactly happens with the error above?
   
  That means CURRENT_IRQL: 5?
  and what it means: DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Thanks a lot for your help.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Help Blue Screen of Death

  My computer crashes every day. This is the message I get when I start it upward. I'm running Vista on this subject. Any help would be most appreciated.
  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1a

  BCP1: 00041201

  BCP2: C015EBE8

  BCP3: 74B3A867

  BCP4: 86212CA 8

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Hello

  
   
  1. have you made changes on the computer before this problem?
  2. he got at the opening of any application?

  Blue screens are mostly because of material and sometimes incompatible software.  In many cases, it is a corrupted driver or a driver conflict.

  Try the following and see if it helps.

  Method 1:

  Step 1:

  Try to start in safe mode and check if you are faced with the same question.
  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
  If it works in safe mode, then I recommend you to perform a clean boot in safe mode with network to identify which program is causing the problem.

  Step 2:

  
  How to solve the problem by running the clean boot in Windows Vista: http://support.microsoft.com/kb/929135                                                                                                                       
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  Note: Make sure also that you have disconnected all external devices except the keyboard and mouse.

  
  
  Method 2:
  
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233

  NOTE : Please check the information in Event Viewer and let us know the question briefly to provide you with a better solution.

  What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-event-viewer  

• Blue screen crashes and Windows error CRQL

  Hello. I'm not well-versed in computers, but here is what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I do not know how to open the dump files, but I have those. I also tried to install via Windows updates and everything seems to date. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello Gvazquez,

  Thanks for posting in the Microsoft Answers forum! Your question is still there while inSafe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.

  To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  You can also try a clean boot troubleshooting method to see if it helps you solve your problem.

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Blue screen Crash webcam plugged during the conversation live call video windows

  Whenever my webcam is plugged in a conversation in windows live, to allow us to start a video call, it causes my computer crash blue screen and closed.

  It did not used to do this, and we do not know why?

  We use Vista and the WebCam is a model of Delux from Logitech:

  M/N: V-UBG35, V20

  I tried uninstalling and re - install the WebCam software, but it makes no difference.

  Thank you very much for any help you can give us!

  AppleRight

  Hi pgard,

  1. did you of recent changes on the computer?

  2. what software do you use for video conversation?

  3. What is the error message that you receive in the blue screen?

  It seems the webcam must update software or good version of the driver must be installed.

  Check out the links and try the steps mentioned below.

  http://forums.Logitech.com/T5/video-chat-applications-non/BSOD-for-notebook-webcam-Deluxe/m-p/68910

  http://forums.Logitech.com/T5/webcams/computer-crashes/m-p/118452

  If fails it step above, they are checking in the case where the newspaper for the cause of blue screen of death and post back with the details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  For additional support, post your request in the forums of Logitech using the link below.

  http://forums.Logitech.com/T5/webcams-video-calling/CT-p/webcam_video

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue Screen crashes randomly

  I had to reinstall my Windows XP Pro SP3

  I started to feel blue screen randomly crashes. The code that is displayed is:

  STOP: 0x000000D1 followed: (0x322B745F, 0 x 0, 00000002 00000000, 0x322B745F)

  or: 0x3170505F, 0 x 0, 00000002 00000000, 0x3170505F

  I was not able to find these codes to better understand what to do, can anyone help me please?

  Bill

  Hi Bill,

  You ask your questions in the forums XP

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  How to ask a question
  http://support.Microsoft.com/kb/555375

  If you mean you had Vista and it bluescreened then it is very difficult to solve with the
  OS not installed.

  See this thread for the use of BlueScreenView, MyEventViewer and other methods to solve problems
  BlueScreens in Vista.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help blue screen Stop error

  If it received Blue error screen and auto restart past since I did the sp1 update. I have Windows Vista-32 and the error I get is:

  Stop: 0x0000008E (0xc0000005, 0x93F042F9, 0X92CD3C50, 0x00000000)

  Win32k.sys - address 93F042F9 base at 93E00000, DateStamp 4549aea2

  I need help here. I'm going nuts trying to figure this out. I would appreciate your help. Thank you.

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Make sure that all new equipment installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. Also, clear or
  remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use
  Safe mode to rename or to delete the faulty driver. If the driver is used as part of the system startup
  Mode process without failure, you must start the computer by using the Recovery Console to access to the
  file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the service from the system startup of
  using the recovery and then Console by removing the system service file incriminated.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x1E. You can disable the cache in memory of the BIOS to try
  to resolve the error. You must also run the diagnostics of equipment, in particular the scanner memory, which
  the manufacturer of the system provides. For more information about these procedures, see the owner
  Manual for your computer.

  The error that generates this message may occur after the first reboot during Windows installation or after
  The Setup is completed. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For problems during the installation of Windows that are associated with the lack of disk space,
  reduce the number of files on the disk drive hard target. Search for and delete temporary files that
  you do not have to have, the files hidden Internet, backup application files and .chk files that contain saved
  fragments of files on the disc scans. You can also use another drive to hard disk with more free space for the
  installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.