Help build control PWM with Accelerator and arduino

Similar Questions

• Code help: query based cfloop with StartRowOptional and EndRowOptional in cfscript

  It is probably a fairly simple thing - but I'm trying to learn as much cfscript possible by converting my CFC cfscript. I found examples of loops in cfscript based on a query, but I don't know where the StartRowOptional and EndRowOptional would fit in.

  < cfloop query = StartRowOptional "qQuery" = "start #" EndRowOptional = "#end #" >

  < cfset var = var1 >

  < cfset var2 = var2 >

  < / cfloop >

  Thanks a bunch for advice.

  ~ Ben

  You should be able to use a 'for' with indexes and keys. Something like (where 'start' and 'end' is your values):

  Loop over the query.

  for (intCurrentRow = start; end LTE intCurrentRow; intCurrentRow = (intCurrentRow + 1))

  {

  access the query as if it were a structure of arrays with the index of the current line:

  stcSongs.songID = qSongs ["songID'] [intCurrentRow];

  stcSongs.songName = qSongs ['songName'] [intCurrentRow];

  etc...

  }

  Hope that helps.

• Get all reference - modified controls: problem with LV2009 (and not LV8.6.1)

  I modified reference.vi get all the controls (http://zone.ni.com/devzone/cda/epd/p/id/2902) and it works very well in LV8.6.1.  With LV2009, I get the class conflicts of wire (for references).

  With LV8.6.1

  

  With LV2009

  

  I tried to type cast (more generic class) but it doesn't work, someone has an idea to solve the problem?

  Jean-Marc

  I agree with you,

  I made the changes as soon as this morning.  I just need the reference of the tab control itself (I don't need references from pages). I used 'generic' instead of 'control' and I catalogued to a more specific class (control) in step 5 in the block diagram.

  
  Thank you

  Jean-Marc

  The changed files are available at http://forums.ni.com/ni/board/message?board.id=4170&thread.id=30464 (I apologize to not upgrade this post).

• BlackBerry smartphones HELP! Green bubble with icon and star

  My blackberry recently ran batterery and when I got round to load once again, he had an icon that looks like a green bubble with a white phone inside and a red star and a number 1 next to it. I guess it was a voice message, but my voicemail box is empty. Anyone know whatthis means? Any help much appreciated!

  If I were you I would check this statement

  homescreen > options > applications > third party

  I bet that's where.

• With the help of a PC with PS5 and need to open BMP files. Everything speaks of a format ad on. Where it is located or is - it possible.

  Using a PC with Windows 7 and 64-Bit Photoshop CS5 Extended. I work with the old digital files saved in BMP format and unable to open. Help talk an ad - for various formats, where do you find such an animal, it is still possible.

  You shouldn't have any add-on to open an image file in BMP format. Photoshop.exe a BMP file format support open and save images in BMP format should not be a problem. You can use BMP files you can't open it in Photoshop with other programs like the viewers the Image and paint programs that support the *.bmp files? Your file is possibly corrupted.

  Supported in Photoshop file formats

• HELP Please: compare timestamps with excel and make the corresponding value in the next column

  Hello

  I have attached the program I did up to now and the txt file required by the program.

  I want to compare the timestamp given by me at the beginning of the program, and when it is true, I want to take the corresponding value of nearby and use for the calculation.

  I am able to compare the time but I do not know how to take the corresponding '0' or '1' value of the file.

  I'm a beginner to labview. It can be simple, but I couldn't understand it

  Kindly help.

  Thanks in advance

  Arun

  This?  If you get a match, find a true Boolean 1 d array and use the index of the element to get the data of the next column.

  

• With the help of vector graphics with fxml and JavaFX

  HY
  
  I wonder about the use of vector graphics scalable, svg, files in my project JFX.
  I know how to display the png with an imageview images and who can handle via CSS style (like fx-background-image)
  But for now, I want to add a vector graphic to my scene.
  I'm not shure if I use .ai, .svg or other file formats and how to load that.
  
  I read on SVGGraph but failed to get the idea behind it
  (and think that's not for files)
  
  So please can someone tell me how single charge and show a graphic vector and formaterait which should take?
  
  Ah: A way to make this replaceable graph via CSS style would be nice too ;)
  
  Thank you
  
  BR

  This .fx file is probably the old 1.x JavaFX, which is no longer supported for JavaFX 2.x and to my knowledge there is also no converter for this.

• With the help of a DBENV with DB_LOG_IN_MEMORY and DB_TXN_NOSYNC

  A BDB running as transaction data store. I have create a DB_ENV and before opening it, set the log configuration to use DB_LOG_IN_MEMORY, send me of ACI (without the D). What changes (if any) on the definition of the DB_TXN_NOSYNC on DB_ENV open?
  
  Thanks, k

  Hi Kedar,

  The Berkeley DB log files do overwrite not several times the same file system blocks as Berkeley DB log files are not implemented as a circular buffer, and the log files are not reused. For this reason, the Berkeley DB log files should not pose difficulties for configurations of memory Flash.

  However, as Berkeley DB does not log records to write in pieces the size of block file system, it is likely that postings of sequential transactions (which each empty the log file on the backup file system), will write twice, a block of Flash memory as the last record in the first validation log will write the same Flash memory block as the first record in the second validation log. Applications requiring no not of absolute longevity must specify the DB_TXN_WRITE_NOSYNC or DB_TXN_NOSYNC flags to the DB_ENV-> set_flags() method to avoid this replacement of a block of Flash memory.

  For more details, please see [configurations only memory or Flash | http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/program_ram.html]

  Bogdan Coman

• With the help of NOR-5641R with FPGA and the instrument driver

  
  

  Hi Ran,

  I don't think what you describe is possible for two reasons.

  1. You cannot run the pilot bitfile instrument at the same time as a user defined FPGA bit file
  
  
  2. AO ports are AC coupled, so you will not be able to generate a DC bias on them.

• How to build a form with checkboxes and radio buttons?

  Current form widgets are great, but what happens if I need to create a little bit of more complicated shapes? Beside that, I love this program

  Hello

  Are you looking for a specific function to the forms?
  Please check this related thread:

  https://forums.Adobe.com/message/6335089

  Thank you

  Sanjit

• speech recognition of labview and Arduino

  Hello

  I want speech recognition with Labview and Arduino. I have already install driver of Arduino and test it in Labview. I want to ask if it is possible to guide me if I want to use hidden Markov and algorithm of ANN, what should I do. In fact, this project is belongs to the robot by voice control, but my knowledge of labview is not so.

  Hello Mohammed,.

  Are you familiar with the theories behing Hidden Markov Models?

  A good starting point would be, for example, this document:

  http://sites.stat.PSU.edu/~Jiali/course/stat597e/Notes2/Hmm.PDF

• How to get the content of a textarea with bbui and jquery

  Hi, I have a problem. I build an app with bbUI and jQuery. Now, I need to get the content of a Textare when someone clicks on the record in the next page:

  
      
  
  
      
  
          
  Text Entry Examples
          
  
              
  
                  
  Text Area
                  123
              
          
      
  
  

  my javascript code looks like this:

  function save() {
      alert($("#myinput").text());
  }
  

  what I have to change to get this working? I don't get the "123", but when I change it is always '123 '.

  I believe you can use the .val property.

  $("#id").val()
  

• How to build the project with library error in adf adf

  Hello

  IM using jdev 11.1.2.3

  in my project I module 2 so we need to build the project with adf dependency libraries...

  Two copies of the way to build the project with trial and error in adf adf

  Timo

• FSX with acceleration gold Edition starts now when I upgraded to Windows 7. It happens just with blue logo start FSX and crashes.

  I ran FSX with acceleration gold edition on my Dell inspion 520 with Windows Vista Edition home premium SP1 and 2 and it worked very well.  Now I updated to Windows 7 Home premium and it just hangs.  I uninstalled FSX and acceleration completely and even delete the directories and given it a clean install.  It seeks to build the database markings and landscapes, and then I let myself just with blue logo start FSX and even after a few hours, nothing happens. It would help if she had an error message, but nothing.  I have also reinstalled the driver for my NVIDIA GEforce 9400 graphics card and checked DirectX and its says its fine.  I have dual core 1.66 32-bit with 4 GB of ram.  Someone has any idea how to solve what Miss me my vol. I tried also to start with compatibility for Win Vista SP1 and 2 settings, as well as Win XP.  I can't get my WinTv Nova-t work either which suggests that it is a graphics problem.

  Hi AMrita,
  I always had the problem last night but I was check the forums and I now after much deliberation to be fixed.  When I go into the Device Manager, I checked all the drivers including the audio player and I was informed that they were all updated and works very well.  Although I had sounds and music I check the setting in 'Control Panel', but this is no software not loaded and nothing is even not a mistake.  I then tried to download the latest software and driver from Realtek for Audio ALC888 and got the following error while installing - an error (-5009: 0x8002802b occurred) previous installation did not finish.  On Googling this error I found a solution in one of the forums that was as follows: to

  Delete C:\Program Files\Common Files\InstallShield\Professional\Runtime - folder or rename it, just in case.

  and then run the windows 7 install for the sound card Realtek and it is now successfully downloaded.  The PC restarts, I started FSX and now its running fine.

  Thanks for the help... got in the end and think I could play music and watch a movie and the sound was very good.

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support