With the help of NOR-5641R with FPGA and the instrument driver

Similar Questions

• 9144 with FPGA and SGL EtherCAT custom user-defined Variables?

  Hello

  I currently have a small instrument driver (rs485) running on a chassis of 9144. The output values are communicated to the master EtherCAT using FXP numbers. I would like to pass these FXP to SGL, since I've upgraded to SP1 2012 LV with FPGA now supports numbers of SGL.

  Is this possible? I tried several times to create the Variables defined by the user of SGL in the project, but the date type is gray.

  Greetings from Munich,

  Götz

  Unfortunately, SGL is not a data type supported for communication to and from a 9144. The types of data available for the I/O user-defined variables are:

  * Fixed point
  * Signed integers (Int8, Int16, Int32, Int64)
  * Integers (UInt8, UInt16, UInt32, UInt64)
  * 32 bit field
  * Boolean

  More information on I/O user-defined variables can be found at:

  Programming EtherCAT i/o with FPGA Intelligence to: Differences in LabVIEW FPGA programming API
  http://www.NI.com/white-paper/10618/en#toc4

• Confused and IVI compared with plug-and-play instrument drivers

  I'm just going up to LabVIEW and see that when I go to download instrument drivers, there are several lists.  One is a Plug-and-Play and the other is typically IVI.  What is the difference?  So far, I've been through the course of the lesson no. 1 and lesson #2 Basic Developer, but we have not touched on the use of the downloaded drivers.

  IVI: Interchangeable Virtual Instrument. With the help of this software layer allows the developer to work with an independent 'generic instrument' of the manufacturer (e.g. Agilent DMM VX OR DMM).

  Plug 'n' Play driver: the driver for the same instance of an instrument, necessary for the operating system to identify and drive the instrument. The driver is device-specific.

  hope this helps,

  Norbert

• Problem with Lightroom and external hard drive. Files and folders deleted.

  In the classroom (8.1 windows computers) import us images that .dng files on an external hard drive using Lightroom.

  After the Lightroom, insert us the memory card containing photos and attach an external hard drive. (formatted to ntfs)

  We create a new catalog on the external hard drive and then create a folder as the destination for the images on the external drive as well.

  After passing to the newly formed catalog in Lightroom, we import the photos from the memory card to the external hard drive.

  Photos are present in the folder 'import' on the external hard drive after the end of the import, so checking with windows Explorer.

  After the closure of LR and disconnect the external hard drive of the computer, it appears that the newly created files and imported files have disappeared.

  We tested with an external hard drive in exfat. The same problem.

  There is no problem when you copy directly in Explorer windows of memory card files to the external drive.

  The files are not hidden. Tested on mac and windows.

  If you said that the photo files are on the external hard drive when you checked using Windows Explorer during the class? Is this correct? YES
  Then you go home and the files are not on the external hard drive? YES

  Well, it is a mystery, but there is no way that Lightroom can be the culprit.

  Is it the same for the catalog file, in class, he was present on the hard disk according to the Windows Explorer, and when you get home, is no longer on the drive? YES

  Same conclusions, it is not Lightroom.

• Impossible to select and place the Instrument Driver VI icons on the block diagram

  I am trying to automate some of the RF measurements using a Rohde and Schwarz Spectrum Analyzer. I downloaded the Rohde and Schwarz spectrum analyzer pilot named 'rsspecan' version 2.6.1 for Labview on Rohde and Schwarz site to use in my version of the software labview 7.1.

  I copied the files in the appropriate folders in the Labview software on the C drive files. I am able to access those files through the functions---> Instrument I / O---> range of Driver of instruments in the Labview diagram, but when I select the VI icon that I want to put, I am unable to place it on the block diagram. Instead of hovering under the cursor by clicking on the VI icon, by clicking on the icon of the VI has no answer whatsoever.

  Any help would be greatly appreciated.

  Thank you

  Thank you very much for the help.

  So, is there a way to get the above mentioned pilot online Spectrum Analyzer, which will be also compatible with LabVIEW 7.1, so that I don't have to go through the conversion of version Board?

  Thanks again,

  Vivek

• Find the instrument Driver won't find 6070E vi

  I have trying to find vi that have been written for card PXI-6070E.  Some fundamental, as output 1 V out of the DAC1OUT.

  When I use "Find her Instrument Driver"... and interrogate National Instrument (company) and 6070E (additional keywords) I get no driver?  I remember being able to get to drivers before.

  Can someone help me please?

  Thank you

  Find the tool instrument Driver is for drivers of finding for instruments like scopes, DMM, power supplies, etc. The PXI - 6070E is a data acquisition card, so the examples it would be installed when you install the DAQmx drivers. You can find the examples in the example Finder (help-> find examples) and search for "DAQ" or see material input and output-> DAQmx folder in the menu tree.

• Product key in the usage message after upgrading the hard drive.

  I missed my activation need help

  I bought a new and larger hard drive. I installed my copy of Vista on my new hard drive. I have inadvertently has my old hard drive connected when I tried to activate the new vista installed. now it says my product key is already in use.  I replaced my hard drive before but this time I did it wrong. I want to format my old drive, but I can't afford a different product key. I'm afraid to format my old drive now that I could end up without any operating system. How can I use my new hard drive as my main C: drive and my old drive for storage of files without having to purchase another license?

  It is quite normal - your key is used by your previous installation.

  You need to re - activate by phone.

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• Can Tecra M9 - I put the HARD drive?

  I currently own a * Tecra M9 - 15I * (part PTM91E-04R03TEN No. - discontinued model).

  When I bought the laptop, it came with a 120 GB HARD drive. I am running Windows Vista Business which fills almost half of the hard drive. I want to upgrade the HARD drive because I think the upgrade to Windows 7.

  Is it possible to upgrade the HARD disk? If so, what are the compatible HARD drive options? If I do not change the HARD drive, this will affect the status of the guarantee of the laptop? for example, I currently have a 3 year warranty and the warranty upgrade HARD drive Toshiba?

  Hello!

  Of course you can upgrade the HARD drive on your laptop and this doesn t affect the warranty. HDD upgrade isn't complicated and so it can be done by the user.

  To swap the HARD drive, you need only remove the screws to the HARD drive Bay and remove the HARD disk cover. Then you can see the HARD drive and swap it.
  I don t know you, look in your user manual. You will find interesting information and photos on this topic.

  Theoretically, you can buy each HARD drive you want. On interface SATA there is no capacity limit.
  I have good experiences with Hitachi and Seagate hard drives.

  Good bye

• I want to convert a former pilot of the instrument written for LV51.

  I found that LV 2009 will not open an existing instrument driver Fowler wrote in LV5.1.  I want to see the patterns of principle to a new driver to use with a FV Fowler MarkV Ultra indicator of figures who use their OPTO-RS cable.  The cable uses rs232 to communicate with a pc.

  I sent the instrument driver to [email protected].  Thanks for commenting.

• Problems of 60 T change the hard drive

  Hello

  I am owner of a T60 with XP preinstalled. For several days I try to upgrade my 100 GB to 320 GB hard drive. I don't want to reinstall everything on it, I cloned the old one via Norton Ghost and resize partitions on the new.

  After inserting the disc into the T60, I can't start. It seems to me that the bootrecord was not correct. Nothing has changed after you fix the MBR. It shows the 'press the blue button' - screen for a while and finishes on a black screen and a blinking cursor.

  Next test was to use the rescue CD & recovery, I've created several months ago. Boot via the first CD has been problem free. Later, I get a dialog where can I enter my password for my domain. I it doesn't repeatedly in all conceivable combinations - no chance. Checking the option "forgot password" present a dialog box with three questions. Even this option did not work for me. The problem looks as a here.

  What can I do to get my previous installation on my old drive in a working copy to my new drive?

  Thank you very much in advance for any idea!

  After several hours of trying to clone with ghost, I decided to use Acronis and 'Yes, it can!

  It worked great and very fast compared to the ghosts. 45 minutes, compared to 3 hours 45.

  1. turn the target in your Thinkpad.

  2 connect a USB device, including your old drive.

  3 dΘmarrage with Acronis and clone your drive.

  That's all.

  Thank you for your support.

  p.s. To be honest, I don't really understand why it works this way only.

• I'm working with Gmail and I see that my browser too old! I have also the same without any extension. Please help me. Thank you

  I'm working with Gmail and I see that my browser too old! I have also the same without any extension. Please help me. Thank you

  You have a user agent which is corrupt and which identifies you as: undefined GoogleToolbarBB

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• lack of start up programs, did a search and all the files on the hard drive, just not where they belong, running windows xp with sp3, any help would be appreciated

  all programs and files on the hard drive just not here where they belong, on windows xp with s p 3

  Hi tessagourden,

  1 have you tried all of the suggestions listed in the previous post?

  Add the previous suggestions, you can also try the system restore to the point before the attack of viruses and to check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.