Help.  Cannot reopen the images in Bridge/PS

Similar Questions

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• Launch PS by double clicking on the image in Bridge

  Run CC (2015) and with the last update, I lost the ability to launch Photoshop by double clicking on the image in Bridge.

  I can't find the setting that controls this...

  Thank you

  Tom

  Look in the Bridge (Edit) > preferences > file types Associations

  
  

  So tell set you photoshop cc 2015 for Jpeg, then double click on the JPEG in bridge should open in photoshop cc 2015

• Can someone help me find the output in bridge CC option?

  Can someone help me find the output in bridge CC option?

  http://helpx.Adobe.com/bridge/KB/install-output-module-bridge-cc.html

• With the help of 123greetings and cannot view the images text only. Which branch is missing?

  Why can I not see all media and images when I download a 123 greetings ecard.

  Thank you

  Hello

  1 are you facing this problem with this site?

  2. what web browser are you using to view the website?

  3. what version of Internet Explorer is installed on your computer?

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Images are not displayed on Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/283807

  Why can I not see the images on a Web site?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-see-the-pictures-on-a-website

  Note: it also applies to Windows XP.

  Can't access some Web sites in Internet Explorer : http://support.Microsoft.com/kb/967897

  Disclaimer : Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Hope the information is useful.

• Cannot create the image of the system due to an internal error

  Widows 7 cannot create an image system due to an internal error.

  What should do?

  Original title: the system image

  Hello

  Please contact Microsoft Community.

  I understand that you can not create the system image.

  I will definitely help you with this.

  What is the exact error of the internet you found?

  I suggest that you go through the links below:

  Refer to the suggestion given by Shubham Chaubey said may 17, 2016:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/unable-to-create-a-system-image/1f1011e6-468d-4AE1-99bd-c9be27677b41

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• cannot change the images downloaded from the iphone 4S

  Photos uploaded from iPhone4s on PC Windows 7 cannot be renamed, copied, changed or anything else. I get a message "error code: (0 x 80070057) '"

  Photos uploaded from iPhone4s on PC Windows 7 cannot be renamed, copied, changed or anything else. I get a message "error code: (0 x 80070057) '"

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Cannot save the image after you change

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Help - sizing of the images to print

  I need help because I have really problems.  When I shoot, Nikon D750 and in RAW, once I changed the images, I try to get the size of print 8 x 10, 11 x 14...  But when I go to resize them they do not hold their original appearance.  For example the picture of a car I shot, when I check the size of the image is W = 20.053 and H = 10.55.  Now I would like to print this at 8 x 10 or even 11 x 14, but when I change it to one of these dimensions, then the image is all chewed and looks like a cartoon.  I can't understand this.  What I am doing wrong?

  As in your example of image, it's say to print on paper 10 x 20 or 5 x 10 so reduced.

  5 x 10 will not fit paper 8 x 10 without stretching it. There is no way to this.

  You use the crop tool to decide which part of the image printed on it. Cropping is the best method if you do not want to distort your image.

  I do not know the parameters of your DSLR, but in the future, you can select a longer describes what you want to print, or take the photo at an angle wide enough to eliminate the surroundings without clipping of the object.

  The pdf file that is in the link has other suggestions as well.

  You cannot escape the proportions. The Image and the paper must be a tight fit.

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Cannot remove the Image event listener

  I'm clearly missing something and would be grateful for the help.  I'm trying to run an event handler when a full picture of loading, then remove the Manager so that it does not once again the image needs to be reloaded later.

  The problem I'm having is that the event handler simple custom ' disappear, despite the call removeEventListener on the Image object.

  The following example illustrates the problem (the example do anything useful... it's just the shortest example to demonstrate the problem).  (To run the application, you will need to provide any file JPEG ol ' named 'myImage.jpg' in the directory 'src' to your project).

  What to expect to happen is:

  (1) at startup, the image loads and runs of loadComplete().

  2) loadComplete removes the event listener so that subsequent re-loads don't get re-triggers the Manager.  I want only the Manager to run once.

  3) 'loadComplete' should appear in the debug console.

  (4) a click on the button should display only 'change picture' in the debug console

  What I get instead is that Manager loadComplete is not removed, and whenever I click on the button, loadComplete runs when the image is re-load (i.e., each button click results in the showing in the debug console 'change picture' AND 'loadComplete' ).

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "
  "<mx:Image width ="655"height ="181" source =" myImage.jpg" id ="MyImage" autoLoad ="true"="true"scaleContent complete =" loadComplete () " ="100"x ="100"/ >
  < mx:Button = "100" x = "341" label = "Button" click = "click (event)" / >
  < mx:Script >
  <! [CDATA]
  private void loadComplete(): void
  {
  trace ('loadComplete');
  myImage.removeEventListener ("complete", loadComplete);
  }
  private void click(evt:Event):void
  {
  trace ("change Image");
  myImage.load ("myImage.jpg");    Reload image even; This is just an example
  }
  []] >
  < / mx:Script >
  < / mx:Application >
  

  Hello

  You can only remove event listeners you added with the addEventListener() method in an ActionScript block. You cannot remove an event listener that has been defined in the MXML tag, even if it has been registered by using a call to the addEventListener () method that was made within an attribute of the tag.

  Check this page for reference.

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_05.html

  You can change the code a bit get it works

  
  
  private function myImage_creationCompleteHandler(event:FlexEvent):void
  {
       myImage.addEventListener("complete",myImage_completeHandler);
       myImage.load("myImage.jpg");
  }
  
  private function myImage_completeHandler(event:Event):void
  {
       myImage.removeEventListener("complete",myImage_completeHandler);
  }
  

• NB100 - cannot create the image of the main partition

  Hello.

  I am a Toshina NB100 user and I am happy with my netbook, but I have a problem.

  I always work with partition on my hard drive. 20GB primary partition and the secondary partition have 100 GB.
  I have the windows xp operating system on the primary partition, and on the secondary partition I music, photos, programs, games, etc.

  When I want to created an image of my main partition with Acronis partition magic or with other programs the NB1000 do not recognize the hard drive, the machime write a caption "I can not find the HD. I thing that the problem is the fault of the Bios.

  Anyone know of this problem? or maybe someone could do?

  Hello

  I doubt that it is a BIOS problem.

  The fact is that the laptop uses the SATA HDD controller and your imaging software cannot recognize the HARD drive due to lack of SATA drivers.

  The Intel Matrix Storage Manager package located on the Intel page contains the necessary files to the SATA.

  Good bye

• Cannot download the image of the camera to the computer

  original title: Sakar 26480 Aqua shooting underwater digital camera 0.3mp

  I have downloaded the driver on the manufacturer's Web site and I still can't get the pics off the camera

  I need help, my son took pictures on vacation and I would see them.

  Many times you don't need drivers.  The camera will appear as a memory device USB.  You can simply open in WIndows Explorer and copy the images to your hard drive.

• Cannot access the images on external hard drive.

  I'm trying to access a folder on my external hard drive. The folder contains images and the hard drive is the internal hard drive from my old computer with XP as the BACK. The new computer I try to access the folder on a Vista like the BACK. I can open the file, but when I try to open the images, it says I don't have permission to access the location of the file. I tried to implement the steps described in this thread http://answers.microsoft.com/en-us/windows/forum/windows_7-files/accessing-files-on-external-hard-drive/1bd3550f-10fc-406e-be45-0de794343e53 but it did not work. Help, please.

  Hello

  Referring you BACK Disk Operating System?

  I suggest you to follow the steps and check if it helps.

  Step 1: Give Permission to everyone and check if it helps.

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and in the permissions tab, click Add.

  (c) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) type like everyone else, the in called Windows Enter the name of the object to select it, and then click OK.

  (e) in the new window, give select full control and click OK.

  (f) click OK.

  Step 2: in the permission tab (follow step a and b in step 1 to open the authorization tab), if you have any user refused to try to remove it and make sure that include the permissions that can be inherited from the parent of the object is checked.

  Reference: troubleshoot "access denied" when opening files or folders

  I hope this helps.