Cannot save the image after you change

Similar Questions

• How do I save the image after the converted in 64RGB

  Hello everyone,

  I'm trying to save the image of out of 64RGB on my computer. Is this possible? I had a go and could not do. Can someone look at my code please.

  Kind regards

  Lazer

  Take a look at the following:

  

• Cannot save the picture after auto picture setting

  I can't save a picture after auto adjusting.

  • Windows Live Photo Gallery.
  • Unable to save changes to this picture because photo library

  Hello

  To fix, follow these steps:

  1. right click on the DESKTOP icon and select PROPERTIES

  2. Select ADVANCED SYSTEM SETTINGS

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. click on ENVIRONMENT VARIABLES.

  5. on the merits, half, under SYSTEM VARIABLES, search for the PATH variable and highlight.

  6. click the button CHANGE

  7. ensure that what starts with % SystemRoot%\system32;%SystemRoot%;

  8. make sure a semicolon separates each entry.

  9. click OK three times

  10. restart the computer

  Refer to: http://social.answers.microsoft.com/Forums/en-US/wlmedia/thread/f992dd14-2c9e-4205-9c87-2d2250996202/

  For more information, you can post your questions in the Windows Live community forums: http://windowslivehelp.com/product.aspx?productid=20

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the drive after you type the correct password for BitLocker. Access is denied.

  Hi all!

  I really have a problem with my disc drive BitLocker encrypted.

  On my PC at the beginning (from 2009), with OS win7, I encrypted my external WD 500 GB MY BOOK hard drive.

  Unfortunately, old PC died:(et il y a un problème.)

  Now on my new computer with win7 OS or another, I can't access my WD 500 GB MY BOOK external hard drive?

  my first try the solution: I try to unlock the drive with my correct password and everything seems OK, drive is unlocked, but when I try to enter the disk I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  After that, I try another option.

  try my second solution: In Control Panel > system and security > BitLocker Drive Encriptación I chose my encrypted disk and try to decrypt the drive. After maybe 7 hours and 99 percent, I got a pop-up message with the error. I don't remember now exactly how was the message.

  Now, when I log on windows, on another device (laptop) when I attach my WD 500 GB MY BOOKoutside, drive in my computer , I have the following status: my external WD MY BOOK 500 GBhard drive is unlocked, visible and recognized as a drive J:\, but I can't access it.

  When I try to enter again the drive, I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  Also, I have the correct password and BitLocker recovery key stored correctly the USB onmy.

  Help, please

  Best.
  

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Try changing the permissions on the drive for access.

  a. go to "Computer".

  b. right-click on drive J and choose Properties.

  c. click the 'Security' tab and see if your current user is displayed in the ' group or user names " list. If not, please click on the Add button, type the name of your current user account in the "enter the names of the objects to select " box, then click 'OK' to add this group.

  d. Select the user from the list, then check the box 'Allow' next of ' Full Control '.

  e. click on the Advanced button, and then click the 'Owner' tab. Then, press the button "Edit" .

  f. Select current user in the list and check the box "replace the owner of subcontainers and objects".

  g. click 'OK' to save the changes and wait for Windows to transfer ownership of all objects on the partition.

  h. click OK to save the changes and exit the Properties window.

  Check if you are able to access the drive.

  You can also check: BitLocker Drive Encryption Step Guide for Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• get this error message "cannot save the picture that you don't have enough access privileges. Help just spent hours doing the tags and need to save quickly

  I have just designed hang tags and you want to save the file, but continue to receive the error message when I try to save.  "Cannot save you don't have enough access privileges"? Help please

  Try changing the location you're trying to save in.

• Original Edit > cannot save the image

  Hi, have a strange problem for a few days. If I change the image (PSD) in InDesign with the 'Edit original' command in Photoshop sometimes once picture editing, I get the message "cannot save" C:... /... psd ' because the file is already in use or left open "when I try to save. If I close the file in InDesign I save again the image in PhotoShop. Sometimes not all the time. I do not work with files on the server. It's just me alone...

  Anyone experienced this kind of behavior?

  Photoshop 11.0.1 + system Win XP SP3, InDesign 6.0.3. (CS4)

  Claudius

  I had this same problem, but I tried to export my file in format .idml (InDesign Markup) and he re-recorded as a new indesign file. Maybe try that? -Sort the problem (so far) with me.

• How to get rid of search bars that appear on the images after you mouse over them?

  When I mouse over any image on some sites an 'x' in a black and white circle appears in the right corner of the image and a search bar in the left corner. Mouse research leads to a drop-down list with about three links box. By clicking on the "x" close the search bar, but how I keep from always appear? Very annoying when on a page with multiple images (e.g. browsing someone Photo Gallery on DeviantArt)

  It's weird - if you run a search, what is sought?

  This is probably a feature of an add-on. You can view your add-ons and initially disable all non-essential and unrecognized plugins and extensions.

  Firefox orange (or the Tools menu) button > addons > Plugins category
  
  Firefox orange (or the Tools menu) button > addons > Extensions category

  After restarting Firefox, if the display persists, could you post a screenshot of it and see if anyone recognizes? This article may help: How to make a screenshot of my problem?

• Cannot open the program after you restore the backup of the files.

  original title: problems of recovery program

  I had to do a system recovery. When the files have been restored from the backup made on to the DVD-they do not repopulate the original sites, that is to say the restoration has created a section of program in the C drive, but it had only the value default ones that came with the computer since the store - as it was supposed to, given was a cover. However, all of the programs I've added over the years are stuck in the restore file called "Program Files" as most have been downloaded since the ' net, I have no disks. not only that most is time sensitive and have many improvements. How can the Backed files program, now residing in 'My Documents', developed by the backup process located in the C drive program area? When I try to open the program in the restore file, the content and details are listed, but the program does not work. Thanks for any information.

  Hey Dave to Campbell River.

  I'm a bit confused between your question and the answer. Have you already restored your system or if you are trying to implement and obtain information?
  In response to the original question, you can back up your entire hard drive, back up is called a System Image, it will be, as it is said, back up your system.
  A system backup / full copying data files, but not everything on the drive. You cannot use it to restore the entire system.
  I hope that sheds some light on it for you. And fear what (I'm trying to follow the number two of the answer now) you created a backup system, and are now trying to re access to your program files, I'm afraid, you're out of luck. I had to learn the hard way, too, so I hope you are getting information and are not in this situation.
  Hope this has been useful, if you have any other questions, feel free to keep coming them.
  Thanks for posting of answers!

• How to connect all the image after you have moved the records?

  I have a lot of illustrator files in folder A and each file has tons of images from different folders (B, C, D). All of these files are inside a main root folder.

  Recently I moved this folder to an external hard drive, then all the illustrator files disconnect with the images. Is it possible to connect all these pictures all together instead of recreating a link one by one?

  Thank you!

  you open a file HAVE, when you get the dialog box "cannot find the file related ABC...". »,

  -Check the box 'apply to all '.

  -Click the 'repair '.

  -Navigate to the location of the new ABC file

  All images must automatically be relinked

  You would need to repeat for each file HAVE

• Loss of quality of the image after you have placed?

  Hi people, I could really use some advice here. Currently, I'm going to print a document and have encountered some problems in image quality.

  More specifically, when I compare the quality of my original images (fit) to the quality of the images placed in InDesign, images in InDesign (and later, in the events of printing) are heavily pixelated.

  I don't know if this image as an attachment is important enough to illustrate this problem, but the small window is open TIF image (and zoomed in) in Windows Picture and fax viewer and it is superimposed on the image when zooming-in in InDesign.

  I've only used InDesign for a couple of years, so I really hope that I made an obvious mistake, but I can't seem to find a solution to this problem after having spent the afternoon on Google and Adobe forums trying to find a.

  Thank you in advance for your help!

  Aryn

  

  Additional information:

  -with the help of InDesign CS4

  -J' set the display of high-quality performance

  -J' checked the link

  -J' tried to rebinding

  -l'image has not been resized in InDesign

  -J' tried to create a new image and place again, with the same results

  Windows Image & Fax Viewer is not really the best tool to inspect the images with. I suspect that your original image can be as pixelated as InDesign shows, while the Image Viewer smooth it on enlargement; It is certainly * not * show "real pixels as rectangles.

  (Word is another program that did this same dirty trick - prompting complains like "my image looked better in Word," while in fact they are worst but blurred into oblivion.)

  You need to see in a real program, such as Photoshop. (The actual pixel dimensions that Peter also claims would help.)

• Backup complete pc cannot find the image after factory reset

  Don't know what forum this is because it is not quite fit any category.  Happy to have redirected it.

  Had some problems with my laptop, so I created a full backup in Vista Business pc.  Then I reset the phone to factory settings and tried to reinstall the saved image.  The Vista is OEM installed, so used F8.  The system can't find the image even if I select D drive and view the file.

  Thinking it's perhaps something to do with connections etc. that I had put in place a new instance, I created a new complete pc backup and it does not find this to be.

  I bought Acronis and copied the original image (which was also recorded on an external drive) then tried to reinstall on drive C.  He failed.

  Don't know what to do next.  Everything seems to be on the disks.  I read something about the load drivers.  Also something about the use of a virtual server.

  Don't know where to go from here.  It's been nearly three days.

  Nine Hills,

  Where you store your backup Image? On your D drive?

  You have access to a retail Vista installation disc? If Yes, you can run the System Recovery Options that allow you to do a complete PC Restore to outside the Vista desktop environment.

  If not, try the following steps:

  1. Click on Start-> in the field type to start searching the backup status and Configuration, click on enter.
  2. Click on restore files on the left, click Advanced Restore. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. Choose the files from a backup made on a different computer.
  4. Select the location of the backup you want to restore. (Can you locate your Image of restoration here?)
  5. Click Next, and follow the wizard to complete your restoration.

  This resolves who you know?

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Select the Image after you have placed

  Hi legends,

  With the help of the forum, I developed the script below.

  My request is for jobs in math type, find the content and location of the Image fine //working

  But for another application, I need to select the image again.   need your help

  var myDoc = app.activeDocument;
  
  //to get image path
  var myFilePath = app.activeDocument.filePath;
  var myLinksPath = myFilePath + "/" + "links";
  var myArtPath = File(myLinksPath);
  var myArtFiles = myArtPath.getFiles("*.eps");
  
          
  app.findGrepPreferences = app.changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "<<<.+?>>>";
  var _equFound = app.activeDocument.findGrep();
  
  for(e=0; e<_equFound.length; e++)
  {
      var _equ_Content = _equFound[e].contents;                         //1
      var myFinalContents = String(_equFound[e].contents).replace(/>>>/, "").replace(/<<</,"");
      
          for(j=0; j<myArtFiles.length; j++)
          {
              var myArtName = myArtFiles[j].name;
              var myReplace = myArtName.replace(/\.eps/, "")
              var myFinalImageName = String(myReplace);
  
              if(myFinalContents.indexOf(myFinalImageName) != -1)
              {
                      _equFound[e].place(File(myArtFiles[j]));     //place the image
                      
                      
                      //NEED HELP FOR THE BELOW LINE
  //~                     File(myArtFiles[j]).select();
                      app.selection[0].anchoredObjectSettings.anchorYoffset = 10;    //Error found here
                  }
           }
    }
  

  Concerning

  Siraj

  Try this,

  //to get image path
  var myFilePath = app.activeDocument.filePath;
  var myLinksPath = myFilePath + "/" + "links";
  var myArtPath = File(myLinksPath);
  var myArtFiles = myArtPath.getFiles("*.eps");
  app.findGrepPreferences = app.changeGrepPreferences = null;
  app.findGrepPreferences.findWhat = "<<<.+?>>>";
  var _equFound = app.activeDocument.findGrep();  
  
  for(e=0; e<_equFound.length; e++)
  {
      var _equ_Content = _equFound[e].contents;                         //1
      var myFinalContents = String(_equFound[e].contents).replace(/>>>/, "").replace(/<<
  Vandy
  		   

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0