Help - sizing of the images to print

Similar Questions

• Correct sizing of the image for printing

  Good day to all;

  I'm a bit new to all this, so that this question may seem a bit simple.

  Is there a correct way to size for printing photos. That's what I did.

  My camera is set to 6 meg gives me a great original. I want to take advantage of this and print on a 4 x 6.

  I bring to the top of the image, select print > click on 'media adapted size. This gives me the size of

  5.333 X 4.

  I'll return to the selection of the photo: Image > Image size. Under the Document size, I enter 5.333 width. The change of height to 4

  Question, I am doing this correctly

  Thank you all

  Chomp

  Use Image > Image size.

  Set the resolution to 250 (for inkjet) and put in your long size in inches.

  Check "Keep proportion" to avoid any distortion.

  ' Save as... '. "under a new name.

• PS Newb needs help with resizing the image and print several sheet

  Hi, I am using PS CS3 to resize an image, I have so I can print to use as a map for a miniatures game.  I have no problem of scaling of the image to the appropriate size, but I can't understand how to print multiple image 8.5 x 11 sheets.  I thought I saw an option for such a procedure before, but maybe it was in another editing program.  If anyone has any ideas on how I could do this I would really appreciate hearing about them.  Thank you!

  Illustrator and InDesign are tiled printing, like CorelDraw. Photoshop, this title is not, but may be a few script for this. In your case, the simplest solution would be to save the file in PDF format and have Acrobat print a tiled (Page scaling of parameter in Acro print dialog box). You just need to make sure that your page corresponds to several pages. Unliek AI and ID, Acro chop only stuff based on standard paper sizes...

  Mylenium

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• Sizing of the images of several resolutions to print on a page of a resolution

  Maybe it's a basic question of Photoshop that betrays my lack of experience with the digital workspace, but I would like to know how to draw multiple images of different resolutions on a 300 ppi page, intended to be printed.

  I have three images: a 300 ppi, 3 x 4 inches, another is 4 x 5 inch, 900 DPI and a third is 4 x 5 inches, 600 dpi.

  I created a single page that is 300 ppi, 8 x 10 inches. My images will be adapted according to the physical size. But when I drop my 600 dpi and ppi 900 images in this page, they explode at twice and three times the space, spoiling my efforts to put them. Similarly, if I cut the ppi on images greater than 300 DPI, they explode as well.

  The only possible option I think that might work is automatic Resample/bicubic. But wouldn't that reduce the quality of the image?

  Thank you!

  An image file is a single file, no matter how many layers and images and sizes of pictures in there is that a single resolution than one resolution that all layers and images have the same resolution, the current resolution set in the document or the file setting.

  You can process the image file and save the files that have different resolution and different image of an open image size.  You would set something like that using the Image Processor Pro Script Photoshop plug-in that is available free on the Web.

  A printed page can have multiple images of different sizes to this topic but all images on the page have the same pixel resolution. They're just a different number of pixels. Larger images are more pixels then small images on the page.

  It's easy to make a layout.  Do your layout and size of your images for your page layout.

  Photo Collage Toolkit

  Scripts for Photoshop is powerful and I think that this package demonstrates this a video showing a collage of 5 model PSD image fills with images:

  The package includes four simple rules to follow to make Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.

  1. Models of photo collage for the desired print size - width and height of the size and DPI print resolution.
  2. Photo collage templates must have a background layer in Photoshop. The content of this layer can be anything.
  3. Photo collage templates must have alpha channels named "Picture 1", "Picture 2"... "Picture n".
  4. Photo collage templates layers above the background layers must provide transparent areas to reveal the images which will be placed below them.

  There are fifteen scripts in this package, they provide the following functions:

  1. HelpPhotoCollageToolkit.jsx - online help
  2. TestCollageTemplate.jsx - used to test a model of Collage of Photo while you're doing it with Photoshop.
  3. CollageTemplateBuilder.jsx - can build models that are compatible with this toolkit scripts.
  4. LayerToAlphaChan.jsx - used to convert a stack of the Prototype Image layers in a document template.
  5. InteractivePopulateCollage.jsx - used to fill interactively model Any Photo Collage. Offers more user control insert images and text.
  6. ReplaceCollageImage.jsx - allows to replace an object layer dynamic image collage populated with another image resized and positioned correctly.
  7. ChangeTextSize.jsx - this script can be used to change the size of text Image stamps when the size used by the filling did not work well.
  8. PopulateCollageTemplate.jsx - used to fill a Photo Collage template and leave the populated copy automatically opened in Photoshop.
  9. BatchOneImageCollage.jsx - used for the models automatically batch fill Collage that have only a single image inserted. The Collage or picture may be stamped with the text.
  10. BatchMultiImageCollage.jsx - used to model automatically batch fill any Photo Collage with images in an image source folder. Easier to use than the interactive script. Recorded collages can be twisted.
  11. PasteImageRoll.jsx - paste Images into a document to print on roll paper.
  12. BatchPicturePackage.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.  Rotation of images for a better fit.
  13. BatchPicturePackageNoRotate.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder.
  14. PopulatePicturePackage.jsx - used to fill a Photo Collage fill with the same single image model and leave the populated copy automatically opened in Photoshop.
  15. PCTpreferences.jsx - edit this file to customize Collage fill preset scripts and add your own layer styles.

  Documentation and examples

• On the image in print quality

  Sometimes, you will notice that when you print an image it does not appear as expected, the colors are just a little off - step as vibrant as you want it to. There is a reason for that, and that's because when you transfer an image on your computer the colors for the image change slightly.

  In the real world and in printing, the colors come from three primary colors - Cyan (light blue), Magenta (Pink) and yellow.  Then there is black which gives depth and a sound signal (CMYK).  However, on your computer screen, you're dealing with a different method. Most of the screens are made up of small LEDs that flash at very high speed to give you the colors you see. These diodes are blue, red and green (RGB).

  Now, these two color combinations are very similar, this is why there is not a radical change, and for some, this change might not be noticeable. Here is an example of printing from the computer-

  

  While this image is superb, the tones in some areas are a little more muted due to how the file was subtly shifted from CMYK to RGB. Now, you can find the details of this image by carefully creating presets for photo through various programs that essentially make up for this change, but there are other easier methods, I found.

  The first of them is to use ePrint. If you have a printer with web functionality, send the photo via email diretly to the printer cancels the transition and renders the image as it was originally. Not all printers have this feature, but it is becoming more common on many newer models often.

  The other method is one that you can use your printer directly if you have a card reader / USB port. Imbernon or load the image on one of these devices you can print again directly avoiding the color conversion. This will give your images a more pristine quality. Take a look at the same image printed directly from a USB key.

  

  Just a little more dynamic and has just a touch more in detail. To get the best quality and results, sometimes it requires outside the box thinking. Generally this method will provide you with great results without any necessary error.

  However, it is important to note that if you want to convert or use a format other than .jpg, it won't work, and you try to change the settings on the program that you use to compensate for the shift in color.

  I hope this information is useful to you guys, if you have any questions contact me for more help!

  Here's a cute baby tiger too!

  

• could not see the image tiff, printed using Microsoft Office Image writer

  My OS is Windows Vista Home Premium.

  I am able to print a document using the printer, but when I print the same document by selecting the Microsoft Office Image writer, I cannot find the image file to the location that I saved. I am able to see the image immediately after printing, but does not after the closing of the window. I am able to see the document I'm trying to attach it to an email in the file to be attached to window, but if I join I get an error message saying that the file is not found at the location. If anyone can help...?

  Ooes that happen with all the tiff images or just a specific document?  It happens with any other type of file?

  If it occurs with a single document and works very well with other tiff files, then I would say that the file is corrupted.  Can you open it directly?  It may be a problem with Office Image Writer, and possibly your e-mail program - but it's not likely if they work with other files, tiff and other file types.

  Maybe the Office has a feature to repair corrupted files.  Also if the problem affects all files tiff and other types of files when you use Image Writer, I suggest that repost you your question in the Forum of the Office to: http://www.microsoft.com/office/community/en-us/flyoutoverview.mspx where the experts at the office will be more than happy to help you with your problem.  You can also find 3rd-party file corruption repair sofware online by searching for what I said just to www.download.com, www.tucows.com, Bing and Google.  If you use Outlook for e-mail, you can after there as well to cover the messaging problem you described.  If you use another e-mail program, answer simply by name.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Enlarge/reduce the image for print on HPC309A

  How to enlarge or reduce the size of the image when copying on the HPC309A?

  Thanks for your help,

  TEHACHAP

  Press OK button to turn on the screen if it is in power save mode.  Move the up or down arrow to 'Copy', press OK, press the 'Settings' button then scroll down to 'Size', OK, then scroll upward or down to the appropriate setting.  If you select "Custom", OK, you can use the up and down arrows to select the reduce/enlarge scale factor, then press OK.

• Help to improve the Image Processor Pro Script to save transparency in TIF

  Hello world

  This is my first post in this community.

  We have a droplet which reduces the resolution of tif images at 72 dpi and save the image tif with transparency. It works very well, but it took a long time for the whole process of many picture in different folders. This is the reason why we have sought another script that can preserve the folder structure and define the resolution of each image at 72 dpi tif.

  We found Image Processor Pro, which does exactly what we needed. The script works perfectly in CS5 and CS5.5 save the tif with transparency. The tif images could be used in InDesign with transparency.

  BUT Image Processor Pro script works not so perfectly in CS6 as it seems that this option to save a tif with transparency does not exist or does not work in the script. The result is that those converted tif images are without transparency in InDesign. It is a huge problem for us.

  This is the point where I need your help. Neither I have experience yet with jsx-files or the right syntax of it.

  Is it possible for someone of you to implement / improve Image Processor Pro so it will save tif with transparency?

  We used the last German Image Processor Pro Version: 2.3.1 (link: http://www.russellbrown.com/scripts.html)

  (The German version contains only German on the texts of the screen!)

  I am very grateful for any help you can give.

  Thanks in advance for your help.

  The only reason why I can invision would happen, is that they change the default behavior on what to do when the transparency option is not specified.

  The simplest solution, if you always want to have transparency with tif files is:

  Find this piece of code or towards line 3811:

       case "tif": {
          var value = (isWindows() ? ByteOrder.IBM : ByteOrder.MACOS);
          var str = fsOpts.tiffByteOrder.toString();
  

  Change to look like this:

       case "tif": {        saveOpts.transparency = true;        var value = (isWindows() ? ByteOrder.IBM : ByteOrder.MACOS);        var str = fsOpts.tiffByteOrder.toString();
  

  It will not work properly if there is transparency.

  BTW, where did you get a German version of this? I've written PPI but never germanisés he...

• Position of the image to print

  Before Photoshop Elements 10, when setting up print, I was able to uncheck 'center', and then I could drag the image anywhere I wanted on the printing surface.  Now there is a blue box that does not move and the image is cut by borders if you drag from the Center.  I want to be able to drag the image anywhere I want on the paper and then print, as I used to.  How do I do that?

  Clear the image Centre check box and you should be able to drag the blue box around, but you kind of bug on it on the side to move the box rather than on the picture in the box.

• Help - Clone causes the image to move

  PES 9

  When I move the clone on the image stamp he moves the entire picture and shows an image duplicated under. It is a new problem as I have used this tool often.

  Thanks in advance for your help.

  You probably have the Clone Source Overlay.

  Most of the people put to Eclipse so you can always see a preview of source of duplication, or you can turn it off.

  There is a button on the toolbar options for the clone source options:

  

• Help to create the image preview for flv player

  Hello

  I created an application that includes a selection of the videos menu system and a video player.  Currently the flv player video when the application opens begins loading.  I would change this option to display a preview image which would not disappear until my users click on a button to display a video.

  I tried to use the preview image in the flv player and received this error message:

  "The preview image is displayed only during the creation. To generate a preview image of runtime, use the button export and load the image back by writing your own ActionScript. »

  Can anyone help me please with actionscript, I need to load my image in the player?

  Thank you

  :

  Fl.video import. *;
  Import fl.video.VideoEvent;

  showPosterFrame (null);

  display.autoPlay = false;

  function showPosterFrame(event:Event):void {}
  myPoster.visible = true;
  }
  function hidePosterFrame(event:Event):void {}
  myPoster.visible = false;
  }
  function playMovie(event:MouseEvent):void {}
  hidePosterFrame (event);
  Display.Play ();
  }

  myPoster.addEventListener (MouseEvent.CLICK, regarderMovie);

  Create variables
  var safeVideo:String = ' Videos/Fotolia_12024529_V_M (video security) .flv ";
  var safeVideoPlaying:Boolean = false;

  var videoToPlay:String;

  Manage the complete video events
  function videoCompletedHandler(event:VideoEvent):void {}
  If the security video has completed, and then play the video selected
  If {(safeVideoPlaying)

  
  safeVideoPlaying = false;
  Display.source = videoToPlay;
  } else {}
  showPosterFrame (null);
  }
  }
  display.addEventListener (VideoEvent.COMPLETE, videoCompletedHandler);
  display.addEventListener (VideoEvent.PLAYING_STATE_ENTERED, hidePosterFrame);

  Respond to a button click
  function buttonClickedHandler(event:MouseEvent):void {}
  var videoNum:String = event.currentTarget.name.substr (6).
  videoToPlay = ' videos/video' + videoNum + '.flv ';

  display.autoPlay = true;

  Safe video game
  safeVideoPlaying = true;
  Display.source = safeVideo;
  }
  for (var i: uint = 1; i<>
  This ["Button" + i.ToString ()] .addEventListener (MouseEvent.CLICK, buttonClickedHand ler);

  }

  p.s., make sure that there no artifacts as spaces in the variable object/forum names.

• How to change the behavior of the 'Sizing of the Image' Module export

  As part of the export process, I want to resize an image to a fixed size, for example, 5400 x 3600. Should be scaling the iamge symmetrically and thus some fill with black or white may be necessary.

  I know I can do this as an action "post-processing", but then I need to re-do sharpen, attribution of profile of color etc.

  So is it possible in the SDK to "replace" the "Image Sizing" Module with one of my own to do?

  Best wishes

  Terry

  And Version 4 can do exactly what you want

  Tim

• How to use text variables and the Image for printing

  I work for several months on the product with AS3 Configurator.
  I am not competent with AS3.
  Now, it seems that perhaps my design is all wrong.
  Is there a good way to do this?

  I have a main scenario that has video clips showing images of different options for the product.
  On the first image, I use buttons to select the choice for option 1 of the Option1_mc.
  Can I store the selection in a variable.
  I use a button to go to the next choice (screen 10.)

  On frame 10, I use buttons to select the choice of option 2 in the Option2_mc.
  It is stored in another variable.

  There are about 10 options that are selected and stored in variables.
  Some are text values and other images taken from video clips Option instances.

  I made a Print_mc to use to printjob.
  I can't get the values of the variables to display the first image for printing.

  Any helpl would be appreciated.

  You are welcome.

  you will not be able to insert a variable into a textfield.  you are going to assign to the text of your TextField property set to one of your points of variables to.

  Thus, for example, if you have:

  var var1:String = 'this is a test ';

  You can use:

  TF. Text = var1;

• Help with subordinating the image show?

  I developed a set of dynamic pages (php) that show examples of works by artists, but have a problem with displaying in IE browsers. Because the table is configured to carry a maximum of 4 images and text associated alt, IE holds a picture poster in place of the 'missing' images, where the maximum number of images is not used.
  To resolve this problem, I would like to be able to make the page display only the number of images that are in the table, without displaying the holders of additional image. I guess it can be done with a sort of a FI... ELSE statement?
  The page in question is generated when an artist is selected in list of exhibitors. For example, the list Sue James uses only 2 images and the page looks so it's broken images at the bottom of the list because of the image place holders.
  Any suggestions or pointers would be greatly appreciated.
  Sorry if I have not made myself sufficiently clear.
  Thanks in advance,
  Graham (more a Potter than a developer )

  Murray, you are a champion!
  I went with your first suggestion because I found it easier to understand. Have tweaked to satisfy the various categories of table and it works a treat on all sections - artists, businesses, and educational applications.
  Thank you very much for your expert help - it is much appreciated.
  Graham