Help card SD TX!

Similar Questions

• Equium A60 - 157 HELP Card/PCMCIA wireless network!

  Hi all!

  This problem has been frustrating me for at least 2 months.

  OK, I recently bought a Belkin Wireless G Notebook Card (wifi card).
  The first time I installed the wifi card it worked perfectly. I powered
  extinguish your laptop (after I had finished working on it). The next day
  When I turned the laptop on, you guessed it, the wifi card was not
  work. I did not remove the wifi card for the power off/power on stage.

  When I went into Device Manager, a yellow exclamation point was
  above the wifi card. When I looked at the properties of wifi cards, I found the
  following message appears:

  This device cannot find enough free resources that it can use. (Code 12)
  If you want to use this device, you will need to disable one of the other devices on this system.
  Click Troubleshoot to start the troubleshooter for this device.

  I tried unistalling and reinstalling the wifi card. I tried to use the latest Belkin drivers for the wifi card. Sometimes it works, but when I have the power turned off/turned on the laptop it s not go.

  One of the ways I got the card to operate was removing and inserting the card several times
  until he finds resources and finally worked. I put t use this method as, obviously, I might damage the cardbus slot and the card. In the meantime I ve been using a Belkin Wireless G USB network adapter. I had no problems with the USB adapter, but I prefer to use the wifi card. This is because the majority of the wifi card is housed inside the laptop, so it s not easily evicted. The USB adapter is great for wireless networks inside, but too risky for roaming outside.

  I had this problem of 1.70 at 1.8 ° C bios version, and I still have it with revision 1.90. I intend to return m wifi card in the store for an Exchange, but I have a really bad feeling that the same thing will happen with the replacement of the card. I m not convinced that the current wifi card is defective, because it works perfectly when he gets the resources.

  I tried to manually configure resources on the devices, but I have a major problem. Windows seems to be LOCKED in the automatic settings. The automatic settings check box is grayed out completely, it is impossible for me clear the checkbox. I did not take anything in the bios that can help me solve this problem.

  I noticed that there are many devices running off IRQ (interrupt requests) 19, when you view resources by type in Device Manager. These devices are:

  Standard enhanced PCI to USB Host Controller
  USB host controller standard OpenHCD x 2 (two entries)
  Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  Controller CardBus Texas Instrumetns PCI-1410

  When the wireless card works she also runs IRQ 19, but as I said before Windows is locked in the automatic settings and do not manually configure the hardware resources.

  Equium A60-157 is not provided on board, but it has the potential for. WiFi L.e.d. on the front panel, physical location for wifi turn on side panel wireless icon and F8. Someone know if Toshiba offer an upgrade service, or can I install wifi on board myself?

  ANYONE, PLEASE HELP ME WITH THESE QUESTIONS!
  Thanks for your time!

  Hello

  I found this for you:

  Both devices have received a same ports of entry/exit (e/s), the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller does not get a break in the BIOS because of a damaged MPS (Multiprocessor) system table).
  You can use Device Manager to determine where the conflict is and turn off the device in conflict. On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
  Try disabling the features of conflict. It will be interesting to know if the problem will occur again.

  In my opinion, you should contact the Service partner and ask them if the unit is ready for the Wi - Fi module. Sorry, but I'm not sure about that and I don't want to give you a bad information about it.

• computer memory

  I need help card mother havea ECS nettles 3, my computer has the ability to have 8 GB of ram, I bought ram that I had

  2 x 2 GB and also have 2 sticks of 1 GB in total of 6 GB, my computer is a hp pavilion a6700f I have 4 slots 2blue and 2black

  When I put the ram of 2 GB in blue locations and a 1 GB in the black sites, my computer will not start, so I play and move them, bottom line if I put only ram in the black slot it starts only when I Blue it slots will come my BIOS never recognized any of the ram , im so irritated a can someone pleeease come back to me if they have the time so I can talk to a knowledgeable person

  Hello:

  Try this:

  With the image below, insert the 2 GB DIMM 1 and DIMM3 modules and the modules of 1 GB DIMM2 and DIMM4.

  

• How to customize the interface app in 2015 DPS?

  Hello DPS community,

  I'm trying to put in place an application with Adobe DPS 2015 so I use the Web app builder for this interface.

  I managed to put in place the items in a collection, but I can't find any options to customize the viewer interface.

  Is it possible to set the color of the status bar? Customize the sidebar on the side menu left which is connected to the icon menu burger?

  
  

  Thanks for the clarification or useful links on the customization of DPS 2015.

  
  

  Kind regards

  Carsten
  

  The only way to customze the viewer interface is to use page layouts and cards.

  check the example on http://blogs.adobe.com/digitalpublishing/madewithdps

  and take a look at the tutorials available on

  https://helpx.Adobe.com/digital-publishing-solution/help/cards-layouts.html

  https://helpx.Adobe.com/digital-publishing-solution/how-to/grid-layout-collection.html?set = digital-edition-solution-key-technical

• Problem sending fonts (2)

  We did all the steps of the police-manifest (https://helpx.adobe.com/digital-publishing-solution/help/cards-layouts.html#fonts-cards), but we are unable to download our fonts on our generation. We read the last topic on this subject and we followed the steps given by Andrei, but without success.

  «During the creation of the manifest, please make sure the json file is actually named "fonts - manifest.json".» If you name fonts.json, the fonts will not be cooked properly in the application and will not work. (it was the problem this time) We seek to 'manifest-free '.

  Here's our manifesto: https://www.dropbox.com/s/6g4i7to7f1ojrc9/font-manifest.json?dl=0

  Could you help us?

  I took everything what you do - manifest.json text and copied in a couple different online tools online JSON validator and they all came back invalid. It looks like a number of hidden characters which causes the failure. The first three successes with this query return a few tools: json validator.

  To clarify these hidden characters, you must format the JSON as a text file. I hope this helps. If this isn't the case, I suggest you contact the support, it is maybe specific to the font files.

• Download of police problems

  Hello team,

  I have real problems to make the fonts I download to register within the app. I followed the instructions here:

  https://helpx.Adobe.com/digital-publishing-solution/help/cards-layouts.html

  .. but I can't get fonts to include it in my application noticed when I assign them to map metadata.

  I rebuilt the application several times and reinstalled but no joy.

  If everyone was feeling charitable enough to look at the code below and see where I was inevitably badly, I would be very grateful!

  {

  "version": "1.0",

  'description': "Example, font file."

  'fonts': {}

  'AkzidenzBold': {}

  'fileName': ' AkzidenzGrotesk - Bold.otf ",.

  'postScriptName': "" AkzidenzGroteskBQ-BOLD".

  },

  'AkzidenzBoldCondensed': {}

  "fileName':" AkzidenzGrotesk - BoldCond.otf "

  'postScriptName': 'AkzidenzGroteskBQ-BdCnd '.

  },

  'AkzidenzBoldCondensedItalic': {}

  "fileName':" AkzidenzGrotesk - BoldCondItalic.otf "

  'postScriptName': 'AkzidenzGroteskBQ-BdCndIt '.

  },

  'AkzidenzBoldItalic': {}

  "fileName':" AkzidenzGrotesk - BoldItalic.otf "

  'postScriptName': 'AkzidenzGroteskBQ-BoldItalic ".

  },

  'AkzidenzCondensed': {}

  "fileName':" AkzidenzGrotesk - Cond.otf "

  'postScriptName': 'AkzidenzGroteskBQ-Cnd.

  },

  'AkzidenzCondensedItalic': {}

  "fileName':" AkzidenzGrotesk - CondItalic.otf "

  'postScriptName': 'AkzidenzGroteskBQ-CndIt '.

  },

  'AkzidenzCondensedItalic': {}

  "fileName':" AkzidenzGrotesk - CondItalic.otf "

  'postScriptName': 'AkzidenzGroteskBQ-CndIt '.

  },

  'AkzidenzItalic': {}

  "fileName':" AkzidenzGrotesk - Italic.otf "

  "postScriptName": "AkzidenzGroteskBQ-italic".

  },

  'AmplitudeBlack': {}

  "fileName': ' police office - Amplitude - Black.otf."

  "postScriptName": "Amplitude-Black.

  },

  'AmplitudeBold': {}

  'fileName': ' police office - Amplitude - Bold.otf ",.

  'postScriptName': '"BOLD" Amplitude ".

  },

  'AmplitudeRegular': {}

  "fileName': ' police office - Regular Amplitude."

  "postScriptName": "Amplitude-Regular.

  },

  'RockwellRegular': {}

  'fileName': 'ROCK. FTT.

  'postScriptName': 'Rockwell '.

  },

  'RockwellBold': {}

  'fileName': 'ROCKB. FTT.

  'postScriptName': 'bold Rockwell.

  },

  'RockwellBoldItalic': {}

  'fileName': 'ROCKBI. FTT.

  'postScriptName': 'Rockwell Bold Italic.

  },

  'RockwellItalic': {}

  'fileName': "ROCKI. FTT.

  'postScriptName': 'Rockwell italic.

  },

  'StoneSerifRegular': {}

  "fileName':" StoneSerifStd - Medium.otf "

  'postScriptName': 'StoneSerifStd-Medium.

  },

  'StoneSerifBold': {}

  'fileName': ' StoneSerifStd - Bold.otf ",.

  'postScriptName': "" StoneSerifStd-BOLD".

  },

  'StoneSerifBoldItalic': {}

  "fileName':" StoneSerifStd - BoldItalic.otf "

  'postScriptName': 'StoneSerifStd-BoldItalic ".

  },

  'StoneSerifRegularItalic': {}

  "fileName':" StoneSerifStd - MediumItalic.otf "

  'postScriptName': 'StoneSerifStd-MediumItalic.

  }

  }

  }

  Hi guys,.

  Andrei (who owns our function of maps and layouts) was able to reproduce this internal problem with the zip provided by Ian. We don't know why, but I asked the team App Builder for study.

  Neil

• Where detailed instructions for developers to link the RoboHelp HTML files to an application?

  I'm pass RoboHelp for word in RoboHelp HTML. The initial project of assistance was created years ago, and the developers who worked on it are not here anymore. Where can I find detailed instructions for our developers understand how to link the files to RoboHelp for our product application? (I haven't decided yet if you want to use Microsoft HTML Help or WebHelp as a main page layout. More information on how to associate the files could help me decide).
  
  Also, are there instructions anywhere to help understand how to bind the files in application contextual help card ID?

  Thank you, Jessica and Pete! I'll try MSHelpWiki and see if the developers can figure out with this info. If they use Delphi, I'll try the HelpScribble site.

  Thanks for all help
  Lacona

• File name associations give up when changing the name of the project

  Post on behalf of a colleague. It uses Robohelp X 5 on a Windows XP computer.
  
  «We have many occasions where we need to take an existing online help (ABC_001, for example) of the project, to make a few changes/additions/omissions and publish a revised draft (ABC_002) online help.» We were cloning the aid project existing (ABC_001), rename the project to make the changes necessary for the aid project, adding or removing map ID in as necessary .hh files, import revised files .hh as needed and then releasing the project under the new name. We want to maintain the assignments and identification card numbers (25ANG1, map #: 640, file name: check the synchronism #25ANG1) ABC_001 to ABC_002, but the file name associations of abandonment when we change the name of the project. So, it is a laborious process to go through the list and reassign all subjects for the appropriate file names. Is it possible to keep the subject labels with their identification card numbers and their associations of name of one project to another file? »
  
  TIA

  My colleague's response:

  "I discovered that it requires just one step more in the project to help until I can see the associations/alias name file again. I have recompile, Colum recommended, but then I have to close RoboHelp and reopen the project. So, if I'm in the project view and access the context-sensitive Help/card Files/All ID card, I see all file name associations. Thank you, Colum, for your help! »

• Help! Malfunction of MacBook retina SD card slot

  Hello

  Recently, I wanted to use my card slot for a Micro SD card on my macbook 2012 end retina pro website. After inserting the card, I gives me the message "the disk you inserted is not readable by this computer.

  I then followed the button «Initialize...» "as recommended online.

  "" I then delete the MS-DOS card "(FAT)", also reported online.

  However no matter how I try to delete it, I gives me the same message every time "error input / output.

  I made several tests such as the D on start up and made a NVRAM resets with no found error?

  Please help, everybody!

  Try to insert/remove a couple of times and shake the card into the slot.

  The card works OK in another computer or card reader?

  The contacts on the map like own?

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• Help me with my gift card

  I have a $ 50 iTunes gift that I bought just, but he only gave me$ 28,24, he said "you bought $ 50 and your balance is 28,24."

  Help, please

  If you have outstanding balance on your account, it was probably already deducted from the card balance.

  You can check by logging into your Apple ID/iTunes Store account and checking your billing history.

• I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please

  I bought a gift card a while and now I don't have the balance for her and when I try to buy I can not because I already bought it. Help, please. If I can't do my 15 birthday money are wasted. He said as I already had a gift card in my account, but somehow everything is over now when I was not yet buy anything!

  A gift card is redeemable only once, it is useless to try to buy it back again.

  To see what, if any, balance you have left on the account you share you: see your credit balance - Apple Support iTunes

  To see what you bought on the account and therefore potentially used some/all of it: see your purchase history in iTunes on Mac or PC - Apple Support store

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• 2012 15 "rMBP brick; GPU card or logic? Help!

  Hi all

  I have a rMBP 15 "launch of 2012 which seems to have bricked this morning. I was working on when he suddenly stopped (the screen turns off suddenly). After that, the power button seemed only intermittently sensitive.

  Now the computer does not completely; whenever he begins to start, it stops again over the Apple logo/initial progress bar.  Reset the PRAM and other tests have failed. Start in safe mode gives the same results.

  What could happen? My old MBP 2008 suffered the same problem, and it turned to be a reminder on the graphics card.

  Any help would be greatly appreciated, as I do not have a Clipboard for a computer.

  https://www.Apple.com/support/MacBookPro-videoissues/

• Z620: need help with the difference ("boot") of ssd pci-e cards and pci-e (BIOS) nand

  Hello

  I intend to buy a card pci-express ssd for access/faster transfer, and I read the topics concerning the problem of booting from that ssd, but still did not understand much to be honest.

  what I noticed, is that HP620 should work with older (like turbodrive Z), but not the based NAND, new Z turbodrive G2,.

  or only with a few tricks.

  now to my question.

  Some people say, this new nand ssd pci - e cards require a boot uefi bios and a few options, I do not understand.

  as I have a regular bios (not), is it true that you cannot boot from these new ssd expansion slot, or are there tricks like the passage to the AHCI and a few other options in the bios?

  If this is not possible, I'd be limited to regular use SATA ssd, limited to 500 MB/s of bandwidth, right?

  Thanks for any help

  Chris

  Found this info on the web;

  "There are actually two versions of the player. The original version uses the familiar AHCI Protocol, while a new variant is the NVM Express standard. The model of the AHCI is compatible with a wide range of motherboards and available among a wider selection of suppliers. »

  The version of NVMe is also supposed to be faster, but in reality, it is not much of a difference.

  

  I think that you need a motherboard with a socket m2 is to see a real difference in speed compared to the old version of AHCI.

  I understand that it is only the most recent Zx40 HP series range that supports readers NVMe but not sure 100%. It would certainly be a challenge trying to get one to work in a series of Zx20 HZ.

  My SM951 in CrystalDiskMark 5;