help, change white 100% transparent, transparent 50% Gray 50%, 0% transparent black? photo examples
How should I take a black and white photo like this:
and convert it to various levels of gray are different levels of transparency like this:
I need converted as shown above, because I want the background colors of a web page to come through the image.
I can't use simply magic wand to remove white, because I'm really eager to spend some colors although the levels of gray. The darker the gray level, less color going through.
So if you took the original and convert it, you get this kind of effect when its sitting on a red color of web page:
Source language:
transparent:
The photos above, I did as you can see. but these are objects simple rectangle and I did split the image into different layers, a layer for each different amount of gray bar, and then I changed the opacity for each layer respectively.
I can't exactly cut a picture when there is a greater variety of grey levels in the more complex images such as this one:
So far my searches have not answered the question, most describe how to blend two images to get a similar result, but the background must be mixed in photoshop. (I need to mix effect occur regardless of what uses of the Web page background color, so I just need to convert levels of transparency only.) After hours of wading through the material, trying to find an answer I hope get help from good people on the forums here, or perhaps a link to a tutorial showing how do.
What I need to make the impression that it should be a fairly simple task if you know your way around photoshop, I use photoshop for years, but I've never needed to do something like this before.
What you're saying is that you want a picture that mixes varying amounts of black in all that he appears above?
Copy your image, create a new document of the same size with a black fill layer, then create a layer for the fill layer mask. Now target the layer mask, then go to the control panel strings and choose the channel mask and make it visible. Now paste your image and Image - adjustment - invert (because black is transparent).
-Christmas
Tags: Photoshop
Similar Questions
-
PS CC5 how can I change the color of the workspace of black to white or transparent?
PS CC5 how can I change the color of the workspace of black to white or transparent?
Hi swp1pollard
Greetings!
- Open Photoshop
- Go to preferences > Interface (Edit > preferences on Windows PC)
- Choose the color that you want to
Concerning
~ Assani
-
Change the Logo in PNG Transparent black white
I have a black transparent png logo. What is the best way to change it to a white transparent PNG logo? I have been using the magic wand, inverting the selection and then painted white but I can't select all the edges of the internal form letter "IIEP. (NB we work with these people, so I didn't steal to use. I'm writing a few models for them and you may request that a white png, but I wanted to see if I could make one in the meantime).
Is there an easier way to convert white to transparent?
Here is the logo in black: http://www.imperial.ac.uk/edudev/flyers/UNESCO-IIEP_logo_black.png
You don't need to choose something that is already enabled. The existing transparency of this image makes this task easier.
Just open your levels (CTRL-L) and drag the white marker on the left, just after the outbreak.
-
Change the Alpha (transparency) of the text
I'm trying to fade in a text from 0% to 100% transparency.
When I convert the text to a graphic symbol, the alpha
color menu doesn't change anything. This is not
impact on the transparency of the symbol.
When I try to separate the text and use the shape tween
from 0% to 100% alpha, it works, but the police gets broken
on the rise during the process.
What Miss me?
Thank you!
Hey all,.
I realized where I was wrong.
I tried to change the 'A' under color.
I had to click in the center of the symbol itself to change the "effects of color."
-
What is the difference between Diamond White and transparent diamond in the timeline?
I think there are two types of diamond shape object in the timeline panel.
White Diamond and transparent domestic diamond.
Sometimes it goes to white (or transparent from the inside), and I can't understand what are they represent for...
Anyone have a clue?
Help me!
"A solid"keyframe marker"simply saves the current state of" property Panel options ", to the position of the playhead on the Timeline."
If Automatic transition OFF the State recorded following along the timeline, the keyframe will be hallow - which simply means no transition occurred between the previous saved key image. In appearance, when you read the animation, the movement will be 'snapshot' or sudden from one keyframe to another.
See the illustration below.
1 auto Keyframe/Transition to OFF, there is no record of the keyframe.
2. the time Auto keyframe is selected, but with the automatic Transition OFF, you get a solid keyframe.
3. with #2 options still in place, the position of head of next reading will track the movement, but will be represented as a keyframe of Hallow's end.
HTH
Darrell
-
Never opacity mask is 100% transparent object
Hello
I ve you have strange problem with opacity mask.
I want to object to gradiently from 0% to 100% of transparency - and it works and is displayed correctly - unless I result raster in Photoshop. Then, it looks like the left side of the attached photo - object is never 100% transparent. If I raster via Adobe Acrobat file, the result is correct, as shown on the right side of the image.
What I am doing wrong?
Thanks for your help
Jiri Kafka
I can easily reproduce the bug, and that's what it's a bug.
If you copy and paste or even if you place the pdf file and I guess the Illustrator into a photoshop document file and probably open the Illustrator file in Photoshop, you will get the same result, it will not disappear to full transparency.
But there is a work around which is in the file > export > then open Photoshop or pace that docuent and everything will be as expected.
You do not have something wrong, it's a bug.
How happened so long without anyone noticing it is beyond me, and I'd say it's a bug in Photoshop, but it is unlikely that they will admit it
and therefore export to psd rather than paste, place or opening in Photoshop is the work around.
Place or open the pdf in Photoshop will not work because of the way translated photoshop mask too thin way so that Illustrator export to psd very well. This is why I call it a problem of Photoshop.
-
Under Photoshop 2015 a Mac v 10.10.3 with 8 GB of RAM. I get black, white or transparent rectangles appearing in my images. The information is still there because it does not appear in the bridge. Usually occurs with files.
Define the drawing for hardware acceleration to basic mode in the preferences.
Mylenium
-
Discoloration on the edge of an image to 100% transparency
I need to fade on the edge of an image to 100% transparency, save in PNG and then I can put it on another image and it fits naturally. How can I do?
Try something like the following: (it is not the only way)
1 double click on the background to layer the bottom a regular layer
2. Add a new empty layer preceding. (Layer > new > layer)
3. use the Rectangle tool to draw a rectangular selection smaller than the photo
4 Edition > fill > black
5. Select > deselect
6. move the layer under the photo layer (drag thumbnail in the layers panel)
7. click the photo layer and go to layer > create clipping mask
8. click on the full black layer and go to filter > blur > Blur Gaussian to fade at the edge of transparency.
before:
Layers panel:
After:
Adding screenshots
Post edited by: R_Kelly
-
Hardware acceleration, change the settings for troubleshooting is grayed out.
Original title:
Hardware acceleration, change the settings for troubleshooting is grayed out. Help?
I can not turn off hardware acceleration because to solve the problems of change of settings is grayed out. How to sober up there make out or how to access hardware acceleration via the command line? Help is appreciated.
HelloUpdated graphics card drivers and check if it works:See the Microsoft article below for more information on updating drivers: update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-linksAlso check the display setting and locate the driver for the additional settings interface. -
Why I can't print black and white if the yellow cartridge is empty but the black is full?
I have a Photosmart C7250 all-in-one and Mac OS X 10.7 Lion, why can't I print in black and white if a color cartridge is empty? The black cartridge is full, it is not the only one to be used? Is there a setting somewhere that I can change just print in black? I tried the black and white option through command prompt on my computer but the printer always gives me an error message saying that I need to replace the yellow before I can print.
The reason that this, your printer is actually not to damage the internal parts. Mainly the printhead. It is built in integrated security to help protect your investment. HP, as other printer manufacturers, offers you with permanent print heads printers requiring ink for all colors, avoid the print heads. HP, like some other manufacturers, also offers printers with user replaceable print heads. These may or may not require ink in all colors in print, even though damage may occur if the print from the cartridge empty. Finally, HP as some other manufacturers also offers printers with the printhead into the ink supply. He is replaced at each change of cartridge. These printers will happily print with a diet low, empty or many deleted completely same models. I understand that it can be very annoying, but it's a necessary.
-
Creative cloud does not work... the menu drop-down is gray, the icon is black / gray sometimes...
Hello
Please, try the following steps:
- Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Kind regards
Sheena
-
How can I get rid of a green field with a white check mark in that box covers some of my photos and on the windows for firefox icon. Edit
Hello
I want to thank everyone for the information, I had to uninstall Norton in order to get the green boxes deleted. Thank you once again problem fixed. -
Original title: memory card Problemz
When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?
Here's a way to accomplish the task...
Apparently, you have an external or internal USB media player?
Insert the memory card into the correct location on the media player...
If open windows... Close them.When the card is inserted... If you go to... Start / computer... is
player card on one or several removable disks?Removable (e :)) drive
Removable disk (e :))
Removable drive (g)If_Yes_you can download the files from here. Left click
the drive letter that corresponds to the SD card slot should
display the directory of the card and you can copy and paste or
Drag and drop the files of your choice in a folder on your hard drive
drive.Just click with the right button on a group of selected files and choose... Copy...
then navigate to the folder that you want, and then right-click the
folder and choose Paste. -
Change the resolution of the screen and the screen went black
Then I tried to change the resolution of the screen and the screen went black. I tried to restart, plug in my HDMI port on my TV... Nothing. So I went with a system refresh (yes I'm sure it was a refresh and not a restore).
The fact that there is no integrated procedure to detect the moment where that happens and return to the old resolution is annoying enough... But now after that choose the system update and it would be only to reset the settings to default back and keep all the files (as he said it would be), I am extremely frustrated to know that it has deleted ALL my programs. Program E-v-e-r-y. This means that Chrome, Firefox, jGrasp, AutoCAD, all my programs Microsoft Office, all my Adobe stuff, my Visual Studio and so much more that I'm not naming.
I REALLY hope there is a place where they were stored so I don't have to reinstall everything manually. If not, then wow, Microsoft... We finished.
Unfortunately a refresh as he said, only maintains personal records (program data), the data can be located in the "in the"Windows"folder windows.old folder normally C /: Drive, all modern apps should be kept."
All programs of office/legacy (Chrome, Firefox, jGrasp, etc.) need to be relocated from their original sources
Keep all of your programs, personal files (data), settings, the best option is to create a "Disk Image" - see link below for info.
http://Windows.Microsoft.com/en-AU/Windows7/choosing-an-advanced-recovery-method
-
Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software! I have a subscription through my school teacher and don't see any way to renew under the "regime".
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )
Maybe you are looking for
-
How can I transfer a slide show from an IMac to a Macbook Pro? I have installation iCloud.
-
Do I need a DVD player or something close to one to go with my Mac, any ideas?
I intend to get a dvd on my Mac player to watch some discs, few of them are blu - ray, Guy do you have an idea what kind of player should I go for? Thank you.
-
Also, I would like to know how much RAM I have on my current graphics card. Its an Intel (r) G33/G31 Express Chipset Family.
-
Application of close behaviors?
Currently, my application has a GUI thread and a background thread that listens on the server. Currently, I am lauching the listener server from the GUI thread (and then send the GUI app in the background). But my problem is that, if the user closes
-
Line layout selection/evidence code table of the adf
Hi allI use Jdev12c and you want to programmatically select a row in a table. It's the line should be highlighted and the graph of the child should also be updated to the selected line. If I can get one of these features that is also sufficient.I hav